Polaroid iD922 User manual

Streaming Action Camera
User Manual

What’s Included
Micro SD memory card NOT included
Polaroid iD922 streaming camera

A Quick Look at Your Camera
1.4”selfie screen
Wi-Fi Indicator light
Busy/Charging indicator light

Inserting a Memory Card
Before turning on your camera, insert a
Micro SD memory card(NOT included)
into the memory card slot . The
memory card is needed in order to
store photos or videos.
Note: Class 4 or higher Micro SD
memory cards are supported (up to
64GB).

Charging Your Camera
Your camera has a built-in lithium-ion battery. To charge the battery, follow the
below steps.
1. Insert the Micro USB end of
the included USB cable into
the Micro USB port
on your camera.
2. Insert the other end of the
USB cable into the USB port of
a computer or a suitable 5V /
1A USB charging adapter(NOT
included).
Note: A charging indicator
light will illuminate while
charging and then turn off
once charging is complete.

Turning On Your Camera
Press and hold the Power/Shutter
button for approximately 3-4
second s to power on or power off
your camera.
Note: Press and hold the Power/
Shutter button for approximately
6-7 seconds to restart the camera
if the camera freeze.

Changing Modes

By default, when you first turn on your camera, it will be in Video Capture Mode.
Use this mode when you want to record videos.
Video Capture Mode
Video
Capture
Mode
Press to
Record & End
Recording
Battery
Meter
Press the Power / Shutter button to begin
recording video. Press it again to end your
recording.
Videos will automatically be recorded to the
Micro SD memory card.

Make sure the Video settings is selected on the on-screen
menu, and press the Power /
White balance
W
Resolution
There are three video settings that can be adjusted:
Resolution settings determines the size and quality of
the video.
Video settings
System settings
Wifi settings
Video
Capture
Mode
While in Video Capture Mode , press the Menu button to access the Video
Capture Mode Settings Menu.
Video Capture Mode Settings
Display settings
Metering
R
 Metering allows you to pick a pre-set that automatically
adjusts light sensitivity.
 White balance settings attempt to balance out any color
casts so that objects appear which appear white in
person are rendered white in your videos.
Shutter button .

To take photos, press the Mode button to access the Photo Capture Mode .
Photo Capture Mode
Photo
Capture
Mode
Press to Take
a Picture
Battery
Meter
Press the Power / Shutter button to take
a picture.
Photos will automatically be recorded to the
Micro SD memory card.
6

While in Photo Capture Mode , press the Menu button
to access the
Photo Capture Mode Settings Menu.
Photo Capture Mode Settings
Photo
Capture
Mode
Make sure the Camera settings is selected on the
on-screen menu, and press the Power /
Burst mode
Metering
Auto review
White balance
W
A
Next Back Enter
Resolution
Self timer
Burst mode
Metering
S
M
Camera settings
System settings
Wifi settings
There are six photo settings that can be adjusted:


Resolution settings determines the size and quality of the
photo.

Self timer allows you to take a photo after a selected
amount of time.

Burst mode allows you to take several photos
instantaneously after the is pressed.

Metering allows you to pick a pre-set that automatically
adjusts light sensitivity.

Auto review lets you choose if you want to view your
photo immediately after shooting it.
White balance settings attempt to balance out any color
casts so that objects which appear white in person are
rendered white in your photos.
Display settings
Display settings allows you to switch the camera rear
screen to the selfie screen .
While in seilfie screen, press Menu button turn back
to the rear screen.
13 7
5
Shutter button .
Shutter button





While in Playback Mode , press the Menu button to access the Playback
Playback Mode Settings
Delete
Gallery
Slide show
Lock
Playback
Mode
When you want to view the photos and videos you’ve taken, press the Mode
button repeatedly after turning on your camera to enter Playback Mode.
Playback Mode
Mode Settings Menu.
Delete allows you to delete a photo or video.
Gallery allows you to review thumbnails of images and
quickly select desired photos by using the
Slide show allows you to view your photos in succession.
Lock can be selected to lock a photo or video in place so
it cant’t be deleted without unlocking it.
Shutter button .

Make s ure the System settings is selected on the on-screen
menu, and pres s the
There are four general settings:
 Sele ct Date and time to set the camera to the current
date.
 Language setting allows you to choose which language is
used on the camera’s display screen.
 Memory setting allows you to see how much remaining
memory you have on your memory card.
 If you are having issues with your camera’s performance,
select Reset and format to reset the camera to the
original default settings and to format the memory card.
NOTE: Formatting the memory card will cause all
contents to be deleted.
Date and time
Language
Memory
Reset and format
System
settings
General System Settings
When in Photo Capture or Video Capture Modes, you can press Menu button
to access th e General System Settings.
Shutter button .
W
Camera settings
System settings
ifi settings
Selfie off

Wifi Settings
Whe n in Photo Capture or Video Capture Modes, you can press Menu
Follow the camera’s on-screen instructions to connect your device to the
camera’s Wifi. On your device, select the camera’s Wifi and enter the provided
password.
NOTE: While your device is connected to the camera’s Wifi, you will not have
access to the internet.
Make s ure the Wif i s et ti ngs is
selected on the on-screen
menu, and press the Power /
Shutter button to turn the
camera’s Wifi ON.
Wif i
settings
Wifi ON
Wifi ON
To connect select Wifi:
PolaroidIiD922-XXX
Password:
xxxxxxxx
To stop press: OK
Wifi Connected
To stop press: OK
Wifi: PolaroidID922-XXX
Password: xxxxxxxx
button to access the Wifi Settings Menu.
4
W
Camera settings
System settings
ifi settings
Selfie off

App Store and iPhone are registered trademarks of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
Connect to the Polaroid Wave App
The Polaroid Wave app allows you to see the camera’s live view and stored
recordings directly from your device.
1. Download the Polaroid Wave
app on the App Store®(for iOS
devices) or the Google Play™
store (for Android™devices).
2. With your device connected to
the camera’s Wifi, open the
Polaroid Wave app on your
device.

Using the Polaroid Wave App

Using the Polaroid Wave App
When viewing the Camera memory card gallery , you can download photos
onto your phone, delete images or share downloaded images.
*Note: Only downloaded
images can be shared
using the app.

Using the Bicycle Mount
The bicycle mount can be used on bicycle handle bars or other similarly sized poles.
1. Unscrew the two knobs on the
mount and remove the bottom
piece.
2. Wrap the rubber grip around the
handle bar.
3. Place the top piece on the top of the
handle bar, then place the bottom
piece on the underside.
4. Screw the two knobs back into
place so that the mount is secure
and does not shift.
5. Once securely placed on the handle
bar, the camera can be mounted to
the top of the bicycle mount.

The helmet mount can be used on a standard bicycle helmet by securing with the
included helmet mount straps and adhesive pads on the underside of the mount.
Optional: Remove the protective seal on the adhesive strip and place on your bike
helmet so that it sticks in place.
Using the Helmet Mount
1. Take one of the large straps and
thread it down through the slot on
the helmet mount base.
2. Take the end of that strap and
thread it through one of the ports
on a bicycle helmet and then out
through another port.
3. Slide the end of the strap through the
strap’s clip and adjust until the strap
feels properly secure and in place, then
press the clip until it clicks into place.
Using the adhesive strips, fasten the
loose ends of the large strap to other
ports on the bicycle helmet.
4. Repeat steps 1-3 with the other
strap.
5. Slide the fastener into the base and
attached the camera to the top of
the helmet mount.

FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
 Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.