Polaroid PDC 2150 Assembly instructions

Page 1 of 3
Downloading and Installing PDC 2150 Camera Drivers
Downloading Instructions
1. Create a folder in which to save the downloaded file: 2150Drivers.
2. Download the file 2150drivers.exe and save into the folder created in #1.
3. The downloaded file is a self-extracting zip file. Double-click on the file and unzip it to the
folder created in step #1. This folder will now contain the entire image of the 2150 install
CD-ROM.
4. Delete the download file 2150drivers.exe from the folder created in step #1.
5. Burn a CD-ROM of all the files in the folder created in step #1. Note all the files/folders at
the root of the directory created in step #1 should be at the root of the CD-ROM when
burned. The CD file structure should look something like this:
6. After the CD-ROM is created it can be used to install the camera drivers using the install
instructions below.
7. Once the CD-ROM is created, the folder and all files in the folder created in step #1 can
be deleted.

Page 2 of 3
Installing 2150 Camera Drivers and Direct Interface From CD-ROM
Windows 98 Drivers (this is a two-step process)
1. Plug camera into electrical power
2. Plug in USB Cord to computer and to camera
3. Turn camera on
4. Add New Hardware Wizard (box appears on screen)
a. Click Next
b. Click on “Specify a location” and unclick Floppy disk drive & CD-ROM drive
c. Insert 2150Drivers CD into CD drive
d. Click Browse
e. Choose correct drive for CD
f. Click 2150 Windows Drivers
g. Click on correct Operating System = Win 98_SE_ME
h. Click OK
i. Click Next
j. Click Next
k. Click Next
l. Click Finish
5. Next install process
a. Click Next
b. Click Next
c. Click Next
d. Click Next
e. Click Finish
6. Next install process
a. Click Next
b. Click Next
c. Click Next
d. Click Next
e. Click Finish
Install PDC2150 Direct Interface
7. Keep CD in computer
a. Click on Start
b. Click on Run
c. Run destination = D:/setup (where D: is your CD-ROM drive)
8. When PDC2150 Setup box appears
a. Click Next
b. Click Yes – Software License Agreement
c. Click Next – Choose destination location – default to C:\ITC\
d. Click Finish
Windows 2000 Drivers (this is a two-step process)
1. Plug camera into electrical power
2. Plug in USB Cord to computer and to camera
3. Turn camera on
4. Add New Hardware Wizard (box appears on screen)
a. Click Next
b. Click on “Specify a location”
c. Insert 2150Drivers CD into CD drive and click Next
d. Click Browse
e. Choose correct drive for CD
f. Click 2150 Windows Drivers
g. Click on correct Operating System = Win 2K
h. Click Open
i. Click OK
j. Click Next
k. Click Finish

Page 3 of 3
5. Next install process
a. Click Next
b. Click Next
c. Click Next
d. Click OK
e. Click Next
f. Digital Signature Not Found – Click Yes
Install PDC2150 Direct Interface
6. Keep CD in computer
a. Click on Start
b. Click on Run
c. Run destination = D:/setup (where D: is your CD-ROM drive)
7. When PDC2150 Setup box appears
a. Click Next
b. Click Yes – Software License Agreement
c. Click Next – Choose destination location – default to C:\ITC\
d. Click Finish
Windows XP Drivers (this is a two-step process)
1. Plug camera into electrical power
2. Plug in USB Cord to computer and to camera
3. Turn camera on
4. Add New Hardware Wizard (box appears on screen)
a. Click Next
b. Put CD Drivers into CD drive and click Next
c. Click on “XP Driver”
d. Click Next
e. Hardware Install – Continue Anyway
f. Click Finish
5. Next install process
a. Click Next
b. Highlight XP
c. Click Next
d. Click Continue
e. Click Finish
Install PDC2150 Direct Interface
6. Keep CD in computer
a. Click on Start
b. Click on Run
c. Run destination = D:/setup (where D: is your CD-ROM drive)
7. When PDC2150 Setup box appears
a. Click Next
b. Click Yes – Software License Agreement
c. Click Next – Choose destination location – default to C:\ITC\
d. Click Finish
For more information: 1-866-484-0611.
www.polaroid-id.com