Polaroid PTWS16 User manual
FCC Information
This device complies with Part 15 of the FCC Rules.
Caution: Any changes or modications not expressly approved could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Radiation Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
WARNING Li-ion Battery Inside
This product is tted with a Li-ion battery. Do not damage, open,
or dismantle the battery and do not use it in damp and/or
corrosive conditions. Use only with compatible chargers. Never
dispose of batteries in a re, and never expose them to high
temperatures. Do not expose the product to temperatures
exceeding 60°C (140°F).
Rating Label Denitions
Direct current symbol.
This symbol signies the product must not be discarded as house-
hold waste, and should be delivered to an appropriate collection
facility for recycling. Proper disposal and recycling helps protect
natural resources, human health and the environment.
This symbol signies and declares that this equipment has battery
charging which complies with California CEC and energy eciency.
This symbol signies that this is a wireless device powered by
Bluetooth® technology. The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc.
Compliance Information Warranty Information
Territory: United States/Canada
LIMITED WARRANTY TO ORIGINAL CONSUMER
This product (including any accessories included in the original packaging) as supplied
and distributed new by an authorized retailer is warranted by Southern Telecom, Inc.
to the original consumer purchaser against defects in materials and workmanship
(“Warranty”) as follows:
To obtain warranty service:
• Visit our website at www.southerntelecom.com
• Click on Product Support
• Select the Brand of your device
• Select Service Request and ll out the form to begin your inquiry
Your product will be repaired or replaced, at our option, for the same or similar model
of equal value if examination by the service center determines this product is defective.
Products received damaged as a result of shipping will require you to le a claim with
the carrier.
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or oper-
ation, lack of reasonable care, unauthorized modication including software modications such as the
installation of custom rmware. This warranty is voided in the event any unauthorized person opens, alters
or repairs this product. All products being returned to the authorized service center for repair must be suitably
packaged.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIEDWARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THANTHOSE EXPRESSLY DESCRIBED
ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY
PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR
ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR
REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR’S SOLE DISCRETION - ARE THE EXCLUSIVE
REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY
INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT
LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE,
MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL
APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT
EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND
TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT
TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential
damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty
gives you specic legal rights, and you may have other rights that vary from state to state or province to
province. Contact your authorized retailer to determine if another warranty applies.
Designed in US
Printed in China
v1. 05-2020
PLR IP Holdings, LLC, its licensees and affiliates, fully support all electronic waste initiatives. As
responsible stewards of
the environment, and to avoid violating established laws, you should properly dispose of this product
in compliance with all
applicable regulations, directives or other governances in the area where you reside. Please check
with local authorities
or the retailer where you purchased this product to determine a location where you can appropriately
dispose of the product.
Polaroid, Polaroid & Pixel, Polaroid Color Spectrum, and Polaroid Classic Border Logo are
trademarks of PLR, IP Holdings,
LLC, used under license.
PLR IP Holdings, LLC does not manufacture this product or provide any manufacturer’s warranty or
support.
www.polaroid.com ©2020 All rights reserved
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
used under license.
All product names, trademarks, and registered trademarks are property of their respective owners.
All company, product,
and service names used in this document are for identification purposes only. Use of these names,
trademarks, and brands
does not imply endorsement.
Instruction Manual
Active Pro Wireless Earbuds
PTWS16
Before You Begin...
CAUTION
To ensure safe and proper use, read all safety information before using
the device. Only use with manufacturer-approved batteries, chargers,
accessories, and supplies.
• READ THIS MANUAL AND SAVE FOR FUTURE REFERENCE
• THIS DEVICE IS NOT A TOY, do NOT allow children or pets to use or play
with this device.
• Do not disassemble, modify, or repair the device.
• Do not expose the unit to extreme temperatures (heat or cold), open
ames, humid, or wet conditions.
• Do not submerge in water.
• Low power may cause poor Bluetooth connection or sound distortion.
• Do not overcharge battery.
• If using with a USB adapter, make sure the adapter is not damaged.
• Do not allow the USB port or the connectors of the supplied USB cable to
be exposed to dust, or water, or come into contact with any conductive
materials such as liquids, metallic powders, etc.
• This device should not be disposed of with regular household waste.
Please consult the local authorities on the correct way to dispose of this
device.
Questions & Customer Support
For questions, troubleshooting or any other assistance, please
visit our website at SouthernTelecom.com and click on
Product Support.
In the Box
• PTWS16 - True Wireless Earbuds (x1)
• Charging Case (x1)
• Micro-USB Charging Cable (x1)
• User Manual (x1)
Getting Started
Charging the Case
Insert the small connector of the supplied micro-USB charging
cable into the micro-USB charging port on the back of the
charging case. Insert the large connector into the USB port on
a computer, a USB charging device, or 5V USB adapter (not
included) and plug into a wall socket. The case-charging LED
indicator will ash RED while charging and turn solid RED
when fully charged.
Charging the Earbuds
Make sure that the charging case
is fully charged.
Open the charging case and insert
the stem of each earbud into the
case’s charging port. Gently press
down until they“clip”into place and
feel secure.
Press the [ ] button to enable charging. The earbud-charging
LED indicator on the case will turn BLUE. The earbud LED
indicators will turn RED while charging and turn OFF when
fully charged.
Powering ON/OFF
• Power the earbuds ON/OFF by long pressing both [Multi] buttons.
• The earbuds will automatically enter Bluetooth pairing mode.
Bluetooth Pairing
1. Hold the earbuds close together. Long press the [Multi] button
on both earbuds until their LED indicators ash RED and BLUE.
2. After a moment, a voice will be heard on the earbuds indicating
that they are connected. The LED indicator on the main ear-
bud will ash RED and BLUE and the other earbud will slowly
ash BLUE.
3. Set your mobile device to search for Bluetooth devices. When
it appears, select PTWS16 from the list of found devices.
4. Once successfully paired, the LED indicators on each earbud
will continue to slowly ash BLUE.
Re-Pairing the Earbuds
The PTWS16 earbuds come automatically paired to each
other right out of the box. If the earbuds come un-paired from
each other, follow these instructions to re-pair:
1. Go to your device’s Bluetooth settings and locate the earbuds
on the list of Bluetooth devices. Tap to “Forget” the earbuds.
2. Long press the [Multi] button of both earbuds at the same
time, until the LED indicators ash RED and BLUE.
3. Double press the [Multi] button on the either earbud. After
a moment, the LED indicator will ash RED and BLUE on one
earbud and slowly ash BLUE on the other, then two earbuds
will re-pair to each other.
4. Once re-paired, you can now pair the earbuds to your mobile
device. Please consult the Bluetooth Pairing section of this
user manual.
Playing Music
To enjoy music wirelessly on your earbuds, make sure they are
properly paired to your Bluetooth-enabled device. Once paired,
playback is controlled through your paired device.
If you are pairing the device for the rst time, please consult the
Bluetooth Pairing section in the previous column.
Pause/Resume Music
• Quick press the [Multi] button on either earbud to pause
media playback.
• Quick press the [Multi] button on either earbud to resume
media playback.
Answering/Ending Phone Calls
NOTE: Phone calls will only be heard on one earbud.
• Quick press the [Multi] button to answer an incoming phone call.
• Quick press the [Multi] button to end a phone call.
• Double quick press the [Multi] button to redial the last phone
number called.
Location of Controls
(Back of
Case)
[Multi] Button:
Press + Hold: Power ON/OFF
Press: Pause/resume playback,
Answer/end phone call
2x Press: Redial last outgoing
phone number
LED
Indicator
[ ] Button:
Enable/disable
earbud charging
Case-Charging
LED Indicator
Earbud-Charging
LED Indicator
Case Charging Port
Before You Begin...
CAUTION
To ensure safe and proper use, read all safety information before using
the device. Only use with manufacturer-approved batteries, chargers,
accessories, and supplies.
• READ THIS MANUAL AND SAVE FOR FUTURE REFERENCE
• THIS DEVICE IS NOT A TOY, do NOT allow children or pets to use or play
with this device.
• Do not disassemble, modify, or repair the device.
• Do not expose the unit to extreme temperatures (heat or cold), open
ames, humid, or wet conditions.
• Do not submerge in water.
• Low power may cause poor Bluetooth connection or sound distortion.
• Do not overcharge battery.
• If using with a USB adapter, make sure the adapter is not damaged.
• Do not allow the USB port or the connectors of the supplied USB cable to
be exposed to dust, or water, or come into contact with any conductive
materials such as liquids, metallic powders, etc.
• This device should not be disposed of with regular household waste.
Please consult the local authorities on the correct way to dispose of this
device.
Questions & Customer Support
For questions, troubleshooting or any other assistance, please
visit our website at SouthernTelecom.com and click on
Product Support.
In the Box
• PTWS16 - True Wireless Earbuds (x1)
• Charging Case (x1)
• Micro-USB Charging Cable (x1)
• User Manual (x1)
Getting Started
Charging the Case
Insert the small connector of the supplied micro-USB charging
cable into the micro-USB charging port on the back of the
charging case. Insert the large connector into the USB port on
a computer, a USB charging device, or 5V USB adapter (not
included) and plug into a wall socket. The case-charging LED
indicator will ash RED while charging and turn solid RED
when fully charged.
Charging the Earbuds
Make sure that the charging case
is fully charged.
Open the charging case and insert
the stem of each earbud into the
case’s charging port. Gently press
down until they“clip”into place and
feel secure.
Press the [ ] button to enable charging. The earbud-charging
LED indicator on the case will turn BLUE. The earbud LED
indicators will turn RED while charging and turn OFF when
fully charged.
Powering ON/OFF
• Power the earbuds ON/OFF by long pressing both [Multi] buttons.
• The earbuds will automatically enter Bluetooth pairing mode.
Bluetooth Pairing
1. Hold the earbuds close together. Long press the [Multi] button
on both earbuds until their LED indicators ash RED and BLUE.
2. After a moment, a voice will be heard on the earbuds indicating
that they are connected. The LED indicator on the main ear-
bud will ash RED and BLUE and the other earbud will slowly
ash BLUE.
3. Set your mobile device to search for Bluetooth devices. When
it appears, select PTWS16 from the list of found devices.
4. Once successfully paired, the LED indicators on each earbud
will continue to slowly ash BLUE.
Re-Pairing the Earbuds
The PTWS16 earbuds come automatically paired to each
other right out of the box. If the earbuds come un-paired from
each other, follow these instructions to re-pair:
1. Go to your device’s Bluetooth settings and locate the earbuds
on the list of Bluetooth devices. Tap to “Forget” the earbuds.
2. Long press the [Multi] button of both earbuds at the same
time, until the LED indicators ash RED and BLUE.
3. Double press the [Multi] button on the either earbud. After
a moment, the LED indicator will ash RED and BLUE on one
earbud and slowly ash BLUE on the other, then two earbuds
will re-pair to each other.
4. Once re-paired, you can now pair the earbuds to your mobile
device. Please consult the Bluetooth Pairing section of this
user manual.
Playing Music
To enjoy music wirelessly on your earbuds, make sure they are
properly paired to your Bluetooth-enabled device. Once paired,
playback is controlled through your paired device.
If you are pairing the device for the rst time, please consult the
Bluetooth Pairing section in the previous column.
Pause/Resume Music
• Quick press the [Multi] button on either earbud to pause
media playback.
• Quick press the [Multi] button on either earbud to resume
media playback.
Answering/Ending Phone Calls
NOTE: Phone calls will only be heard on one earbud.
• Quick press the [Multi] button to answer an incoming phone call.
• Quick press the [Multi] button to end a phone call.
• Double quick press the [Multi] button to redial the last phone
number called.
Location of Controls
(Back of
Case)
[Multi] Button:
Press + Hold: Power ON/OFF
Press: Pause/resume playback,
Answer/end phone call
2x Press: Redial last outgoing
phone number
LED
Indicator
[ ] Button:
Enable/disable
earbud charging
Case-Charging
LED Indicator
Earbud-Charging
LED Indicator
Case Charging Port
Before You Begin...
CAUTION
To ensure safe and proper use, read all safety information before using
the device. Only use with manufacturer-approved batteries, chargers,
accessories, and supplies.
• READ THIS MANUAL AND SAVE FOR FUTURE REFERENCE
• THIS DEVICE IS NOT A TOY, do NOT allow children or pets to use or play
with this device.
• Do not disassemble, modify, or repair the device.
• Do not expose the unit to extreme temperatures (heat or cold), open
ames, humid, or wet conditions.
• Do not submerge in water.
• Low power may cause poor Bluetooth connection or sound distortion.
• Do not overcharge battery.
• If using with a USB adapter, make sure the adapter is not damaged.
• Do not allow the USB port or the connectors of the supplied USB cable to
be exposed to dust, or water, or come into contact with any conductive
materials such as liquids, metallic powders, etc.
• This device should not be disposed of with regular household waste.
Please consult the local authorities on the correct way to dispose of this
device.
Questions & Customer Support
For questions, troubleshooting or any other assistance, please
visit our website at SouthernTelecom.com and click on
Product Support.
In the Box
• PTWS16 - True Wireless Earbuds (x1)
• Charging Case (x1)
• Micro-USB Charging Cable (x1)
• User Manual (x1)
Getting Started
Charging the Case
Insert the small connector of the supplied micro-USB charging
cable into the micro-USB charging port on the back of the
charging case. Insert the large connector into the USB port on
a computer, a USB charging device, or 5V USB adapter (not
included) and plug into a wall socket. The case-charging LED
indicator will ash RED while charging and turn solid RED
when fully charged.
Charging the Earbuds
Make sure that the charging case
is fully charged.
Open the charging case and insert
the stem of each earbud into the
case’s charging port. Gently press
down until they“clip”into place and
feel secure.
Press the [ ] button to enable charging. The earbud-charging
LED indicator on the case will turn BLUE. The earbud LED
indicators will turn RED while charging and turn OFF when
fully charged.
Powering ON/OFF
• Power the earbuds ON/OFF by long pressing both [Multi] buttons.
• The earbuds will automatically enter Bluetooth pairing mode.
Bluetooth Pairing
1. Hold the earbuds close together. Long press the [Multi] button
on both earbuds until their LED indicators ash RED and BLUE.
2. After a moment, a voice will be heard on the earbuds indicating
that they are connected. The LED indicator on the main ear-
bud will ash RED and BLUE and the other earbud will slowly
ash BLUE.
3. Set your mobile device to search for Bluetooth devices. When
it appears, select PTWS16 from the list of found devices.
4. Once successfully paired, the LED indicators on each earbud
will continue to slowly ash BLUE.
Re-Pairing the Earbuds
The PTWS16 earbuds come automatically paired to each
other right out of the box. If the earbuds come un-paired from
each other, follow these instructions to re-pair:
1. Go to your device’s Bluetooth settings and locate the earbuds
on the list of Bluetooth devices. Tap to “Forget” the earbuds.
2. Long press the [Multi] button of both earbuds at the same
time, until the LED indicators ash RED and BLUE.
3. Double press the [Multi] button on the either earbud. After
a moment, the LED indicator will ash RED and BLUE on one
earbud and slowly ash BLUE on the other, then two earbuds
will re-pair to each other.
4. Once re-paired, you can now pair the earbuds to your mobile
device. Please consult the Bluetooth Pairing section of this
user manual.
Playing Music
To enjoy music wirelessly on your earbuds, make sure they are
properly paired to your Bluetooth-enabled device. Once paired,
playback is controlled through your paired device.
If you are pairing the device for the rst time, please consult the
Bluetooth Pairing section in the previous column.
Pause/Resume Music
• Quick press the [Multi] button on either earbud to pause
media playback.
• Quick press the [Multi] button on either earbud to resume
media playback.
Answering/Ending Phone Calls
NOTE: Phone calls will only be heard on one earbud.
• Quick press the [Multi] button to answer an incoming phone call.
• Quick press the [Multi] button to end a phone call.
• Double quick press the [Multi] button to redial the last phone
number called.
Location of Controls
(Back of
Case)
[Multi] Button:
Press + Hold: Power ON/OFF
Press: Pause/resume playback,
Answer/end phone call
2x Press: Redial last outgoing
phone number
LED
Indicator
[ ] Button:
Enable/disable
earbud charging
Case-Charging
LED Indicator
Earbud-Charging
LED Indicator
Case Charging Port
Before You Begin...
CAUTION
To ensure safe and proper use, read all safety information before using
the device. Only use with manufacturer-approved batteries, chargers,
accessories, and supplies.
• READ THIS MANUAL AND SAVE FOR FUTURE REFERENCE
• THIS DEVICE IS NOT A TOY, do NOT allow children or pets to use or play
with this device.
• Do not disassemble, modify, or repair the device.
• Do not expose the unit to extreme temperatures (heat or cold), open
ames, humid, or wet conditions.
• Do not submerge in water.
• Low power may cause poor Bluetooth connection or sound distortion.
• Do not overcharge battery.
• If using with a USB adapter, make sure the adapter is not damaged.
• Do not allow the USB port or the connectors of the supplied USB cable to
be exposed to dust, or water, or come into contact with any conductive
materials such as liquids, metallic powders, etc.
• This device should not be disposed of with regular household waste.
Please consult the local authorities on the correct way to dispose of this
device.
Questions & Customer Support
For questions, troubleshooting or any other assistance, please
visit our website at SouthernTelecom.com and click on
Product Support.
In the Box
• PTWS16 - True Wireless Earbuds (x1)
• Charging Case (x1)
• Micro-USB Charging Cable (x1)
• User Manual (x1)
Getting Started
Charging the Case
Insert the small connector of the supplied micro-USB charging
cable into the micro-USB charging port on the back of the
charging case. Insert the large connector into the USB port on
a computer, a USB charging device, or 5V USB adapter (not
included) and plug into a wall socket. The case-charging LED
indicator will ash RED while charging and turn solid RED
when fully charged.
Charging the Earbuds
Make sure that the charging case
is fully charged.
Open the charging case and insert
the stem of each earbud into the
case’s charging port. Gently press
down until they“clip”into place and
feel secure.
Press the [ ] button to enable charging. The earbud-charging
LED indicator on the case will turn BLUE. The earbud LED
indicators will turn RED while charging and turn OFF when
fully charged.
Powering ON/OFF
• Power the earbuds ON/OFF by long pressing both [Multi] buttons.
• The earbuds will automatically enter Bluetooth pairing mode.
Bluetooth Pairing
1. Hold the earbuds close together. Long press the [Multi] button
on both earbuds until their LED indicators ash RED and BLUE.
2. After a moment, a voice will be heard on the earbuds indicating
that they are connected. The LED indicator on the main ear-
bud will ash RED and BLUE and the other earbud will slowly
ash BLUE.
3. Set your mobile device to search for Bluetooth devices. When
it appears, select PTWS16 from the list of found devices.
4. Once successfully paired, the LED indicators on each earbud
will continue to slowly ash BLUE.
Re-Pairing the Earbuds
The PTWS16 earbuds come automatically paired to each
other right out of the box. If the earbuds come un-paired from
each other, follow these instructions to re-pair:
1. Go to your device’s Bluetooth settings and locate the earbuds
on the list of Bluetooth devices. Tap to “Forget” the earbuds.
2. Long press the [Multi] button of both earbuds at the same
time, until the LED indicators ash RED and BLUE.
3. Double press the [Multi] button on the either earbud. After
a moment, the LED indicator will ash RED and BLUE on one
earbud and slowly ash BLUE on the other, then two earbuds
will re-pair to each other.
4. Once re-paired, you can now pair the earbuds to your mobile
device. Please consult the Bluetooth Pairing section of this
user manual.
Playing Music
To enjoy music wirelessly on your earbuds, make sure they are
properly paired to your Bluetooth-enabled device. Once paired,
playback is controlled through your paired device.
If you are pairing the device for the rst time, please consult the
Bluetooth Pairing section in the previous column.
Pause/Resume Music
• Quick press the [Multi] button on either earbud to pause
media playback.
• Quick press the [Multi] button on either earbud to resume
media playback.
Answering/Ending Phone Calls
NOTE: Phone calls will only be heard on one earbud.
• Quick press the [Multi] button to answer an incoming phone call.
• Quick press the [Multi] button to end a phone call.
• Double quick press the [Multi] button to redial the last phone
number called.
Location of Controls
(Back of
Case)
[Multi] Button:
Press + Hold: Power ON/OFF
Press: Pause/resume playback,
Answer/end phone call
2x Press: Redial last outgoing
phone number
LED
Indicator
[ ] Button:
Enable/disable
earbud charging
Case-Charging
LED Indicator
Earbud-Charging
LED Indicator
Case Charging Port
FCC Information
This device complies with Part 15 of the FCC Rules.
Caution: Any changes or modications not expressly approved could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Radiation Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
WARNING Li-ion Battery Inside
This product is tted with a Li-ion battery. Do not damage, open,
or dismantle the battery and do not use it in damp and/or
corrosive conditions. Use only with compatible chargers. Never
dispose of batteries in a re, and never expose them to high
temperatures. Do not expose the product to temperatures
exceeding 60°C (140°F).
Rating Label Denitions
Direct current symbol.
This symbol signies the product must not be discarded as house-
hold waste, and should be delivered to an appropriate collection
facility for recycling. Proper disposal and recycling helps protect
natural resources, human health and the environment.
This symbol signies and declares that this equipment has battery
charging which complies with California CEC and energy eciency.
This symbol signies that this is a wireless device powered by
Bluetooth® technology. The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc.
Compliance Information Warranty Information
Territory: United States/Canada
LIMITED WARRANTY TO ORIGINAL CONSUMER
This product (including any accessories included in the original packaging) as supplied
and distributed new by an authorized retailer is warranted by Southern Telecom, Inc.
to the original consumer purchaser against defects in materials and workmanship
(“Warranty”) as follows:
To obtain warranty service:
• Visit our website at www.southerntelecom.com
• Click on Product Support
• Select the Brand of your device
• Select Service Request and ll out the form to begin your inquiry
Your product will be repaired or replaced, at our option, for the same or similar model
of equal value if examination by the service center determines this product is defective.
Products received damaged as a result of shipping will require you to le a claim with
the carrier.
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or oper-
ation, lack of reasonable care, unauthorized modication including software modications such as the
installation of custom rmware. This warranty is voided in the event any unauthorized person opens, alters
or repairs this product. All products being returned to the authorized service center for repair must be suitably
packaged.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIEDWARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THANTHOSE EXPRESSLY DESCRIBED
ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY
PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR
ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR
REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR’S SOLE DISCRETION - ARE THE EXCLUSIVE
REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY
INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT
LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE,
MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL
APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT
EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND
TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT
TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential
damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty
gives you specic legal rights, and you may have other rights that vary from state to state or province to
province. Contact your authorized retailer to determine if another warranty applies.
Designed in US
Printed in China
v1. 05-2020
PLR IP Holdings, LLC, its licensees and affiliates, fully support all electronic waste initiatives. As
responsible stewards of
the environment, and to avoid violating established laws, you should properly dispose of this product
in compliance with all
applicable regulations, directives or other governances in the area where you reside. Please check
with local authorities
or the retailer where you purchased this product to determine a location where you can appropriately
dispose of the product.
Polaroid, Polaroid & Pixel, Polaroid Color Spectrum, and Polaroid Classic Border Logo are
trademarks of PLR, IP Holdings,
LLC, used under license.
PLR IP Holdings, LLC does not manufacture this product or provide any manufacturer’s warranty or
support.
www.polaroid.com ©2020 All rights reserved
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
used under license.
All product names, trademarks, and registered trademarks are property of their respective owners.
All company, product,
and service names used in this document are for identification purposes only. Use of these names,
trademarks, and brands
does not imply endorsement.
Instruction Manual
Active Pro Wireless Earbuds
PTWS16
FCC Information
This device complies with Part 15 of the FCC Rules.
Caution: Any changes or modications not expressly approved could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Radiation Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
WARNING Li-ion Battery Inside
This product is tted with a Li-ion battery. Do not damage, open,
or dismantle the battery and do not use it in damp and/or
corrosive conditions. Use only with compatible chargers. Never
dispose of batteries in a re, and never expose them to high
temperatures. Do not expose the product to temperatures
exceeding 60°C (140°F).
Rating Label Denitions
Direct current symbol.
This symbol signies the product must not be discarded as house-
hold waste, and should be delivered to an appropriate collection
facility for recycling. Proper disposal and recycling helps protect
natural resources, human health and the environment.
This symbol signies and declares that this equipment has battery
charging which complies with California CEC and energy eciency.
This symbol signies that this is a wireless device powered by
Bluetooth® technology. The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc.
Compliance Information Warranty Information
Territory: United States/Canada
LIMITED WARRANTY TO ORIGINAL CONSUMER
This product (including any accessories included in the original packaging) as supplied
and distributed new by an authorized retailer is warranted by Southern Telecom, Inc.
to the original consumer purchaser against defects in materials and workmanship
(“Warranty”) as follows:
To obtain warranty service:
• Visit our website at www.southerntelecom.com
• Click on Product Support
• Select the Brand of your device
• Select Service Request and ll out the form to begin your inquiry
Your product will be repaired or replaced, at our option, for the same or similar model
of equal value if examination by the service center determines this product is defective.
Products received damaged as a result of shipping will require you to le a claim with
the carrier.
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or oper-
ation, lack of reasonable care, unauthorized modication including software modications such as the
installation of custom rmware. This warranty is voided in the event any unauthorized person opens, alters
or repairs this product. All products being returned to the authorized service center for repair must be suitably
packaged.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIEDWARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THANTHOSE EXPRESSLY DESCRIBED
ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY
PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR
ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR
REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR’S SOLE DISCRETION - ARE THE EXCLUSIVE
REMEDIES OF THE CONSUMER. IN NO EVENTWILL DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY
INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT
LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE,
MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL
APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT
EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND
TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT
TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential
damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty
gives you specic legal rights, and you may have other rights that vary from state to state or province to
province. Contact your authorized retailer to determine if another warranty applies.
Designed in US
Printed in China
v1. 05-2020
PLR IP Holdings, LLC, its licensees and affiliates, fully support all electronic waste initiatives. As
responsible stewards of
the environment, and to avoid violating established laws, you should properly dispose of this product
in compliance with all
applicable regulations, directives or other governances in the area where you reside. Please check
with local authorities
or the retailer where you purchased this product to determine a location where you can appropriately
dispose of the product.
Polaroid, Polaroid & Pixel, Polaroid Color Spectrum, and Polaroid Classic Border Logo are
trademarks of PLR, IP Holdings,
LLC, used under license.
PLR IP Holdings, LLC does not manufacture this product or provide any manufacturer’s warranty or
support.
www.polaroid.com ©2020 All rights reserved
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
used under license.
All product names, trademarks, and registered trademarks are property of their respective owners.
All company, product,
and service names used in this document are for identification purposes only. Use of these names,
trademarks, and brands
does not imply endorsement.
Instruction Manual
Active Pro Wireless Earbuds
PTWS16
FCC Information
This device complies with Part 15 of the FCC Rules.
Caution: Any changes or modications not expressly approved could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Radiation Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
WARNING Li-ion Battery Inside
This product is tted with a Li-ion battery. Do not damage, open,
or dismantle the battery and do not use it in damp and/or
corrosive conditions. Use only with compatible chargers. Never
dispose of batteries in a re, and never expose them to high
temperatures. Do not expose the product to temperatures
exceeding 60°C (140°F).
Rating Label Denitions
Direct current symbol.
This symbol signies the product must not be discarded as house-
hold waste, and should be delivered to an appropriate collection
facility for recycling. Proper disposal and recycling helps protect
natural resources, human health and the environment.
This symbol signies and declares that this equipment has battery
charging which complies with California CEC and energy eciency.
This symbol signies that this is a wireless device powered by
Bluetooth® technology. The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc.
Compliance Information Warranty Information
Territory: United States/Canada
LIMITED WARRANTY TO ORIGINAL CONSUMER
This product (including any accessories included in the original packaging) as supplied
and distributed new by an authorized retailer is warranted by Southern Telecom, Inc.
to the original consumer purchaser against defects in materials and workmanship
(“Warranty”) as follows:
To obtain warranty service:
• Visit our website at www.southerntelecom.com
• Click on Product Support
• Select the Brand of your device
• Select Service Request and ll out the form to begin your inquiry
Your product will be repaired or replaced, at our option, for the same or similar model
of equal value if examination by the service center determines this product is defective.
Products received damaged as a result of shipping will require you to le a claim with
the carrier.
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or oper-
ation, lack of reasonable care, unauthorized modication including software modications such as the
installation of custom rmware. This warranty is voided in the event any unauthorized person opens, alters
or repairs this product. All products being returned to the authorized service center for repair must be suitably
packaged.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIEDWARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED
ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY
PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR
ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR
REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR’S SOLE DISCRETION - ARE THE EXCLUSIVE
REMEDIES OF THE CONSUMER. IN NO EVENTWILL DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY
INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT
LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE,
MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL
APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT
EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND
TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT
TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential
damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty
gives you specic legal rights, and you may have other rights that vary from state to state or province to
province. Contact your authorized retailer to determine if another warranty applies.
Designed in US
Printed in China
v1. 05-2020
PLR IP Holdings, LLC, its licensees and affiliates, fully support all electronic waste initiatives. As
responsible stewards of
the environment, and to avoid violating established laws, you should properly dispose of this product
in compliance with all
applicable regulations, directives or other governances in the area where you reside. Please check
with local authorities
or the retailer where you purchased this product to determine a location where you can appropriately
dispose of the product.
Polaroid, Polaroid & Pixel, Polaroid Color Spectrum, and Polaroid Classic Border Logo are
trademarks of PLR, IP Holdings,
LLC, used under license.
PLR IP Holdings, LLC does not manufacture this product or provide any manufacturer’s warranty or
support.
www.polaroid.com ©2020 All rights reserved
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
used under license.
All product names, trademarks, and registered trademarks are property of their respective owners.
All company, product,
and service names used in this document are for identification purposes only. Use of these names,
trademarks, and brands
does not imply endorsement.
Instruction Manual
Active Pro Wireless Earbuds
PTWS16
Table of contents
Other Polaroid Headphones manuals
