Polaroid Lab User manual

Quick Start
Guide
Before you
get started.
Phone to Polaroid™
01 Remove the cover from the platform. Turn the Polaroid Lab
on by pressing the platform release button on the right side
of the Lab. The phone platform will automatically lift into
ready position. Check that the rainbow LED is lit up.
03 Insert the lm pack with the darkside cover facing up.
Use only Polaroid i-Type or Polaroid 600 type lm.
06 Place your phone on the Polaroid Lab platform with the screen
facing down. Ensure that your phone is aligned lengthways
and the top of your phone is facing the top of the platform.
Remove any screen protector or phone cover, as this can impair
nal results.
08 Your photo will eject beneath the lm shield. After
ve seconds, lift the lm shield, allow it to retract into
the Polaroid Lab and then gently remove your photo.
02 Gently pull down on the lm door to open it.
04 Close the lm door. The darkslide will eject automatically
beneath the lm shield. Lift the lm shield and allow it to roll
back up, then remove the darkslide.
07 The Polaroid Lab will detect your phone on the platform. The
rainbow LED will slowly blink three times and then stay on.
If the rainbow LED blinks rapidly, realign your phone. Once the
blinking stops, press the red shutter button on the front of
the Polaroid Lab.


09 Don’t shake or bend the photo! Shield it from light (in a
pocket, or face down on a at surface) until the image begins
to emerge - black & white photos take 5-10 minutes, while
color pictures take 10-15 minutes.
I
Charge the
Polaroid Lab
before use
II
The Polaroid Lab only works with
the Polaroid Originals app.
Download it from the App Store
or Google Play Store
III
The Polaroid Lab is compatible
with Polaroid i-Type
and Polaroid 600 type lm
IV
For best results, remove the
screen protector and cover from
your smartphone. Check that your
phone’s screen is clean. Cracks
and scratches on your screen will
inuence picture quality
05 Open the Polaroid Originals app and tap on the ‘Polaroid Lab’
option. Follow the instructions on the app to select the
picture that you would like to use.
Polaroid Lab
USA/Canada
[email protected]
[phone]
EU/Rest of World
[email protected]
00800 5770 1500
Have a question
you need
answered?
Contact our
Customer
Support Team
or visit polaroidoriginals.com/help
Polaroid, Polaroid Classic Border Logo, Polaroid Originals
& Design and Phone to Polaroid are trademarks of PLR
IP Holdings, LLC, used under license. PLR IP Holdings,
LLC, does not manufacture this product or provide any
manufacturer’s warranty or support.
Apple and the Apple logo are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store
is a service mark of Apple Inc.
Google Play and the Google Play logo are trademarks
of Google LLC.
©2019 All rights reserved.

B
H
A
D
G
C
I
JF
E
A
Light sensor
B
Platform release / ON button
C
Shutter button
D
Rainbow LED
E
Film counter LEDs
F
Film door
G
Touch points
H
Film Shield
I
Battery level LEDs
J
Micro-USB slot
Check your Polaroid Lab charge level The battery level is displayed on four LEDs above the USB slot at the back of the Polaroid Lab. They will light up corresponding with your charge level (e.g. 2 LEDs = 50%) While charging, the LEDs will fl ash. When fully charged, and still plugged into a power source, the LEDs will be unlit
LED Film Counter
Blinking rapidly
No fi lm inserted or no shots remaining Solid lights Current fi lm count (e.g. 4 LEDs = 4 shots remaining)
Rainbow LED Notifi cations
No light
Polaroid Lab off
Slowly blinks 3 times Reading phone Rapid blink Realign phone Light on Ready for exposure
Nav# 340218