POLTI VAPORELLA PROF 1000 Parts list manual

R
Prof 1000

EE
EENN NNGG GGLL LLII IISS SSHH HH
1) Iron temperature adjustment
2) Water heater ON/OFF illuminated switch
3) Steam button
4) Iron on/off illuminated switch
5) Patented safety cap
6) Iron rest
7) Power cable
8) Monotube (cable + steam tube)
9) Filler funnel
Polti S.p.A. reserves the right to change equipment or
accessory specification without prior notice.
PP
PPLL LLEE EEAA AASS SSEE EE RR RREE EEAA AADD DD TT TTHH HHEE EE FF FFOO OOLL LLLL LLOO OOWW WWII IINN NNGG GG
BB
BBEE EEFF FFOO OORR RREE EE UU UUSS SSEE EE
•Before using your Vaporella carefully read these us-
age instructions.
•Before connecting Vaporella to the mains make sure
that the current is the same as indicated for the ma-
chine and that the plug is an earthed plug.
•Do not put any detergent or chemical substance in
the tank.
Water by its nature contains magnesium, mineral
salts and other deposits which in hard water areas
can contribute to limescale build up in the tank. To
avoid these problems, it is necessary to swill out
with tapwater and empty the generator tank after
every 3 or 4 uses.In very hard water areas we rec-
ommend the use of our KALSTOP FP 2003, a spe-
cial natural-base decalcifier which inhibits and
breaks down limescale, making it easy to remove
just by swilling out the tank with a little tapwater. This
is a preventive against scale build-up and protects
the metal walls of the steam generator tank.
KALSTOP is available from Polti dealers or by mail-
order from your Polti Service Centre.
•Do not refill the tank while it is still hot, allow it to
cool down for a few minutes before refilling.
•During filling and refilling we recommend you to dis-
connect the appliance from the mains supply.
•Never empty Vaporella when the water inside the
generator tank is still hot.
•Do not place the appliance in water or in any other
liquids.
•Do not touch the appliance with wet hands or feet
whilst the appliance is connected to the mains.
•Never leave the appliance unattended whilst it is
connected to the mains.
•Do not allow Vaporella to be used by children or by
people who are not familiar with the usage instruc-
tions.
2
EE
EENN
NNGG
GGLL
LLII
IISS
SSHH
HH
VAPORELLA PROF 1000
879
12 3 4 5 6
Fig. 3
Fig. 1 Fig. 2
SYNTHETIQUE-SYNTHETIC
SYNTHETISCH-SINTETICO
SOIE-SILK-SEIDE-SEDA-SETA
LAINE-WOOL-WOLLE-LANA
COTON-COTTON-BAUMWOLLE
ALGODON-COTONE
LIN-LINEN-LEINEN-LINO
Fig. 4
➠

•We recommend that the appliance is disconnected
from the mains whenever it is not in use.
•When REfilling the generator tank, use HOT rather
than cold water, pour in gently at first and keep your
face away. Otherwise the still hot tank walls can spit
drops of very hot water or steam spray.
•Do not leave the appliance exposed to wind or rain.
•Do not lay the hot appliance on surfaces sensitive to
heat.
•Do not use electric extension leads that are not au-
thorized by the manufacturer, as they may cause
damage or fire.
•In case of breakdown or malfunction switch off the
appliance and never attempt to disassemble it, but
refer to an authorized service center.
•In case of accidental fall of the appliance it is neces-
sary to have it checked by an authorized service center
as the internal safety features may have been affected.
•Never direct the jet of steam towards small particles
of debris without first protecting the user’s eyes.
II
IIMM MMPP PPOO OORR RRTT TTAA AANN NNTT TT
Before leaving our factory all our products are rig-
orously tested.
However, your VAPORELLA may contain some
residual water in the boiler.
PP
PPRR RREE EEPP PPAA AARR RRAA AATT TTII IIOO OONN NN FF FFOO OORR RR UU UUSS SSEE EE
1a. Unscrew the patented safety cap (5) and fill the boiler
with about 0.9 litres of water using the special funnel
(9) making sure that it does not overflow (fig. 1).
Normal tapwater can be used. However, as hard wa-
ter by its nature contains limestone, which may
cause a build-up of limescale in the tank, in hard wa-
ter areas we recommend the use of our natural-base
decalcifier KALSTOP FP 2003.
2a. Retighten the cap fully and carefully.
3a. Connect the power supply cable into an earthed
power supply of the correct voltage.
4a. Switch on the boiler and iron by pressing the
switches (2) and (4) (fig. 2).
NOTE: during the filling operation, be careful that
the water does not overflow as it may come out and
wet the surface where Vaporella is laid.
II
IINN NNSS SSTT TTRR RRUU UUCC CCTT TTII IIOO OONN NNSS SS FF FFOO OORR RR UU UUSS SSEE EE
STEAM IRONING
1b. Set the iron temperature to the “COTTON - LINEN”
steam position (fig. 3), by turning the knob (1). All
types of fabric can be ironed at this temperature.
2b. Wait for the heater illuminated a switch (2) and the
steam button (3) to go out. Push button (3) on the
iron to release bursts of steam from the holes on the
soleplate. Release the button and the steam will
stop (fig. 4).
If the heater illuminated switch (3) comes on during
use, continue ironing as it is quite normal.
NOTE: during initial operation of the iron, a few
drops of water mixed with steam may come out of
the soleplate until the temperature stabilises. It is ad-
visable to direct the first jets of steam onto an old
cloth until a uniform stable jet of steam is obtained.
DRY IRONING
1c. For dry ironing, connect the supply cable to the
mains, push the iron on/off switch (4), regulate the
temperature of the iron by turning the knob (1) to the
required temperature for the fabric shown on the
knob itself.
PP
PPAA AATT TTEE EENN NNTT TTEE EEDD DD SS SSAA AAFF FFEE EETT TTYY YY CC CCAA AAPP PP // // ““ ““WW WWAA AATT TTEE EERR RR OO OOUU UUTT TT”” ””
All Polti machines are equipped with the unique Polti
patented safety cap, which prevents opening of the gen-
erator tank as long as there is any pressure remaining in-
side the tank. This is an important and indispensable
safety device, and it is necessary to follow certain pro-
cedures when re-filling the tank.
When you have used up all the water in the tank, do as
follows:
1d. Switch off the heater on/off switch (2).
2d. Press the steam request button on the iron (3) so as
to fully exhaust the steam supply from the tank.
3d. Disconnect the power supply cable from the mains.
4d. Unscrew anti-clockwise the patented safety cap (5).
5d. Wait for a few minutes to allow the generator tank to
cool down.
6d. When cool proceed to carefully refill the tank as de-
scribed in paragraph 1a of the section “PREPARA-
TION FOR USE” in the instructions. If refilling the gen-
erator when not completely cooled, we recommend
that you carefully pour only very small quantities of
water at each pouring into the tank, so as to avoid
spitting from the tank.
II
IIMM MMPP PPOO OORR RRTT TTAA AANN NNTT TT
•Do not leave the iron unattended whilst connected to
the mains.
•Iron only on heat resistant surfaces and on surfaces
that allow the steam to escape e. g. mesh ironing
boards.
•Ensure the patented safety cap is fully and correctly
screwed on, otherwise you may experience steam
3
EE
EENN
NNGG
GGLL
LLII
IISS
SSHH
HH
VAPORELLA PROF 1000

escaping from around the cap.
•The steam botton (3) may go on and off from time to
time during use of Vaporella. This indicates the ma-
chine maintaining the correct and constant pressure
and is quite normal.
•If no steam is released from the iron, check the fol-
lowing: the steam botton (3) is lit up; there is water
in the boiler.
•If repairs or replacement parts are required, and in
particular the special safety cap, use only original
Polti replacement parts.
•The appliance is fitted with a safety thermostat, which
should only be replaced by an authorised technician.
•If it is necessary to replace the power supply cable,
please refer to the nearest Polti authorised service
centre, since the use of a special tool is necessary.
•In the case of breakdown or malfunction do not
attempt to repair the appliance yourself but re-
fer to your nearest authorised service centre.
CC
CCAA AARR RREE EE OO OOFF FF YY YYOO OOUU UURR RR VV VVAA AAPP PPOO OORR RREE EELL LLLL LLAA AA
•Before attempting any maintenance operation,
be sure to always disconnect the appliance
from the mains.
•Normal tapwater can be used. However, as hard wa-
ter by its nature contains limestone, which may
cause a build-up of limescale in the tank, in hard wa-
ter areas we recommend the use of our natural-base
decalcifier KALSTOP FP 2003.
•To clean the body of the appliance, simply use a
moist cloth. Do not use solvents or detergents which
may harm the body material.
•Polti declines liability for any damage or acci-
dent derived from any use of Vaporella which is
not in conformity with the instructions con-
tained in this booklet.
FOR YOUR OWN SAFETY READ FOLLOWING IN-
STRUCTIONS CAREFULLY BEFORE ATTEMPTING
TO CONNECT THIS UNIT TO THE MAINS.
MM
MMAA AAII IINN NNSS SS (( ((AA AACC CC)) )) OO OOPP PPEE EERR RRAA AATT TTII IIOO OONN NN (( ((oo oonn nnll llyy yy UU UU.. ..KK KK.. ..)) ))
This unit is designed to operate on 240V, 50 Hz current
only. Connecting it to other power sources may damage
the unit.
WARNING - This appliance must be earthed.
This appliance may be fitted with a non rewirable plug, if
it is necessary to change the fuse in a non rewirable plug
the fuse cover must be refitted. If the fuse cover is lost
or damaged, the plug must not be used until a replace-
ment, available from the appliance manufacturer, is ob-
tained. It is important that the colour of the replacement
fuse cover corresponds with the colour marking on the
base of the plug.
If the plug requires to be changed because it is not suit-
able for your socket, or becomes damaged, it should be
cut off and an appropriate plug fitted following the wiring
instruction (below). The plug removed must be disposed
of safely as insertion into a 13A socket is likely to cause
an electrical hazard.
IMPORTANT
This wires in this mains lead are coloured in accordance
with the following code.
• Green-and-yellow: Earth
• Blue: Neutral
• Brown: Live
As the colours of the wires in the mains leads of this ap-
pliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as fol-
lows:
The wire which is coloured green-and-yellow must be
connected to the terminal in the plug which is marked
with the letter “E” or by the earth symbol or green-and-
yellow.
The wire which is coloured blue must be connected to
the terminal which is marked with the letter “N” or
coloured black.
The wire which is coloured brown must be connected to
the terminal which is marked with the letter “L” or
coloured red.
4
EE
EENN
NNGG
GGLL
LLII
IISS
SSHH
HH
VAPORELLA PROF 1000
GREEN
&
YELLOW
(Earth)
BLUE
(Neutral)
FUSE
(13 amp)
BROWN
(Live)