POLTI Vaporetto Lecoaspira 690 User manual

Polti S.p.A. - 22070 Bulgarograsso (CO) - Italy - Via Ferloni, 83
www.polti.com
COP.LECOASPIRA 690 M0S09377 1Q06:V_tto_1300cop.qxd 14/01/2011 11.53 Pagina 2
Vacuum-Manual.com Manuals
Downloaded from

Fig. 2 Fig. 3 Fig. 4
Fig. 5 Fig. 7
Fig. 9
Fig. 6a
Fig. 6
Fig. 8 Fig. 10
Fig. 12 Fig. 13
Fig. 11a Fig. 11b
Fig. 14 Fig. A
Fig. B
Fig. C
Fig. D
MAX
Fig. 1
Q
Q
W1 XY
B3
B2
Z
T
C
F
E3
D
E4
E2
Q M
R
S
C
B3
B1
B2
A1
A3 A2
U
P
N
E5
G
24
25
26
8
10
7
11
23
21
43
27
22
20
20-A
O
O1
K1
L
E
X1
V
W
W
12
8
6
10 7
911
5
13
14
15
16
18
19
17
K
Vaporetto Lecoaspira 690 - M0S09696 Edizione 1R01
COP.LECOASPIRA 690 M0S09377 1Q06:V_tto_1300cop.qxd 14/01/2011 11.53 Pagina 1
Vacuum-Manual.com Manuals
Downloaded from

Fig. 2 Fig. 3 Fig. 4
Fig. 5 Fig. 7
Fig. 9
Fig. 6a
Fig. 6
Fig. 8 Fig. 10
Fig. 12 Fig. 13
Fig. 11a Fig. 11b
Fig. 14 Fig. A
Fig. B
Fig. C
Fig. D
MAX
Fig. 1
Q
Q
W1 XY
B3
B2
Z
T
C
F
E3
D
E4
E2
Q M
R
S
C
B3
B1
B2
A1
A3 A2
U
P
N
E5
G
24
25
26
8
10
7
11
23
21
43
27
22
20
20-A
O
O1
K1
L
E
X1
V
W
W
12
8
6
10 7
911
5
13
14
15
16
18
19
17
K
Vaporetto Lecoaspira 690 - M0S09696 Edizione 1R01
COP.LECOASPIRA 690 M0S09377 1Q06:V_tto_1300cop.qxd 14/01/2011 11.53 Pagina 1
Vacuum-Manual.com Manuals
Downloaded from

KEY
1) Suction switch
2) Boiler switch
3) “Out of water” indicator light
4) Pressure indicator light
5) Suction regulator
6) Carrying handle
7) Safety cap
8) Steam control knob
9) Hose connection flap
10) Hose connection
11) Air outlet grill
12) Pivoting wheels
13) Power supply cable
14) Supply cable channel
15) Supply cable storage
16) Accessories holder
17) Hepa filter
18) Unhooking lever for Hepa filter
19) Hepa filter holders
20) Dirt container
21) MAX level (fig. 5)
22) Dirt container handle
23) “EcoActive Filter” water filter assembly
24) EcoActive Filter” water filter
assembly cover
25) Shaped filtering sponge
26) Filter body with microhole net
27) Elbow tube
KEY TO ACCESSORIES
A1) Fitting for accessories connection
A2) Handle
A3) Steam button
B1) Steam+suction hose
B2) Monobloc plug
B3) Locking button of the monobloc plug
C) Accessories locking button
D) Steam + suction extension tubes
E) Universal brush
E2) Bristle inserts
E3) Liquid suction inserts
E4) Insert for fitted carpet
E5) Cotton cloths
K) 120° steam-suction accessory
L) Small coloured 120° steam-suction
brushes
N) Small steam-suction upholstery nozzle
O1) Squeegee attachment for small steam
-suction upholstery nozzle (200 mm)
P) Bristle attachment for small steam-
suction upholstery nozzle
U) Filler funnel
V) Spare gaskets
20-A)Dirt container cleaning brush
OPTIONAL ACCESSORIES
F) Joker brush
G) Parquet accessory
K1) Steam lance
M) Small steam-suction nozzle
O) Squeegee attachment for small steam
-suction upholstery nozzle (130 mm)
Q) Upholstery nozzle
R) Lance
S) Radiator brush
T) Suction brush
W) Iron
W1) Continuous steam button
X) Steam request button
X1) “Iron heating” indicator light
Y) Temperature control dial
Z) Iron rest mat
E
EN
NG
GL
LI
IS
SH
H
LECOASPIRA 690
50
Read these instructions carefully before using the appliance.
LECOASPIRA 690 M0S09377 1Q06:Layout 1 14/01/2011 11.44 Pagina 50
Vacuum-Manual.com Manuals
Downloaded from

P
PR RE EC CA AU UT TI IO ON NS S
KEEP THESE INSTRUCTIONS
• Read these instructions for use carefully be-
fore using the appliance, and make sure that
anyone using the machine is familiar with
these instructions and the warnings.
• DO NOT USE THE STEAM FUNCTION ON
DRAYLON, VELVET, LEATHER OR OTHER
SENSITIVE FABRICS.
• Any use which does not comply with these
instructions will invalidate the warranty.
• The wiring system to which the appliance is
connected must always comply with the laws
in force.
• Before connecting the appliance, make sure
that the mains voltage is the same as the
voltage indicated on the data label of the ap-
pliance and that the power outlet is con-
nected to earth
• Always turn off the appliance at the on/off
switch before unplugging it.
• If the appliance is left unused, always dis-
connect it from the mains. Never leave the
appliance unattended with the cable plugged
into the mains.
• Always make sure the appliance is un-
plugged before performing maintenance
work of any kind
• Do not pull the power cable out of the socket,
but grasp the plug itself to avoid damage to
the socket.
• Do not allow the power cable to be twisted,
crushed, stretched, or come into contact with
sharp or hot surfaces.
• Do not use the appliance if the power cable
or other important parts are damaged.
• Do not use electric extension leads that are
not authorized by the manufacturer, as they
may cause damage or fire.
• If it is necessary to replace the power supply
cable, please refer to the nearest Polti autho-
rised service centre, since the use of a spe-
cial tool is necessary.
• Never touch the appliance with wet hands or
feet with the cable plugged into the mains.
• Do not use the appliance when barefoot.
• Do not use the appliance near a bathtub,
shower or container full of water
• Never immerse the appliance, the cable or
the plugs in water or another liquid.
• Use of the appliance in places where there is
a danger of explosions is prohibited.
• Do not use the product with toxic sub-
stances.
• Do not lay the hot appliance on surfaces
sensitive to heat.
• Do not leave the appliance exposed to wind
or rain.
• Do not place the appliance near a live ele-
ment, an electric stove or any other source of
heat.
• Do not expose the appliance to extreme tem-
peratures
• Never let children or people who are not fa-
miliar with how the appliance works use it.
• Do not press the buttons hard or with a
pointed object such as a pen.
• Always rest the appliance on a stable sur-
face.
• If the appliance is dropped and shows signs
of damage, do not use it but take it to a te-
chnical service centre.
• In case of breakdown or malfunction switch
off the appliance and never attempt to disas-
semble it, but refer to an authorized Service
Centre.
• To avoid prejudicing the safety of the appli-
ance, use only original spare parts and ac-
cessories approved by the manufacturer.
• Do not wind the power cable around the ap-
pliance, especially when the appliance is still
hot.
• Do not use the appliance to suck up acids or
solvents, as these might cause serious dam-
age to the appliance and above all do not
suck up explosive dust or liquids, as these
could cause explosions on coming into con-
tact with the inside components of the appli-
ance.
• Do not suck up toxic substances.
• Do not suck up burning or incandescent ob-
jects like embers, ash or other material in
which combustion is taking place.
• Do not vacuum up detergents or other sub-
stances which could generate foam inside
the Dirt container, as this could cause mal-
functioning.
• Dirt container can be filled with tap water.
• Do not suck up materials such as cement,
chalk etc. which solidify once they come in
contact with water thus damaging the appli-
ance
E
EN
NG
GL
LI
IS
SH
H
LECOASPIRA 690
52
LECOASPIRA 690 M0S09377 1Q06:Layout 1 14/01/2011 11.44 Pagina 52
Vacuum-Manual.com Manuals
Downloaded from

• During refilling with water, switch off and dis-
connect the appliance from the mains.
• It is necessary to keep the unit in horizontal
position during operation.
• Do not direct the steam jet onto electrical
and/or electronic appliances.
• Let the appliance cool down before cleaning
it.
• Before storing the appliance make sure that
it has completely cooled down.
• This appliance is equipped with safety de-
vices which are to be replaced only by a suit-
ably qualified technician.
• Do not direct the steam jet at people, ani-
mals or debris.
• Never place your hands inside the jet of
steam.
• Do not put any detergent or chemical sub-
stance in the boiler. Water by its nature con-
tains magnesium, mineral salts and other de-
posits which in hard water areas can
contribute to limescale build-up in the boiler.
To avoid these problems, it is necessary to
swill out with tapwater and empty the gener-
ator boiler after every 3 or 4 uses. In hard
water areas we recommend the use of
KALSTOP, a special natural-base decalcifier
which inhibits and breaks down limescale,
making it easy to remove just by swilling out
the boiler with a little tapwater. This is a pre-
ventive against lime scale build-up and pro-
tects the metal walls of the boiler. KALSTOP
is available from Polti dealers or by mail-or-
der from your Polti Service Centre.
•We recommend only using original Polti
products as other products may not be
suitable for use with Polti appliances and
may cause serious damage.
•Never use distilled water or scented wa-
ter.
• Do not try to unscrew the safety cap or empty
the appliance whilst water in the boiler is still
hot.
• Do not refill the boiler while it is still hot. Allow
it to cool for a good few minutes before refill-
ing.
• When REFILLING the generator boiler, use
HOT, not cold water. Pour in gradually and
gently at first and keep your face and other
exposed skin well away. Otherwise the still
hot boiler walls may spit drops of very hot
water or steam spray.
• Make sure the patented safety cap is fully
and correctly screwed on, otherwise you may
experience steam escaping from around the
cap.
• Check periodically the safety cap and MAKE
SURE the rubber gasket is in place around
the base of the screw thread.
Replace with original spare parts if neces-
sary. DO NOT USE STEAM FUNCTION if
the rubber gasket is not in position.
• If you iron sitting down, do not place your
legs under the ironing board, the steam can
cause burns.
• Iron only on heat resistant surfaces and on
surfaces that allow the steam to escape e.g.
MESH ironing boards.
• For iron rest mat replacement use only origi-
nal spare parts.
• Check that the steam request button is
switched off before connecting the ap-
pliance to the mains.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or in-
struction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure
that they do not play with the appliance.
• The appliance must not be used if it has fal-
len, been dropped or when it has visible
signs of damage or leaks.
•If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in or-
der to avoid a hazard.
C
CO OR RR RE EC CT T U US SE E O OF F T TH HE E P PR RO OD DU UC CT T
This appliance is intended for home use as a
steam generator and for sucking liquids and
solids as described and in accordance with the
instructions provided in this manual. Please
read these instructions carefully and keep
them, as you may find them useful in future.
ATTENTION:
Danger of burns!
E
EN
NG
GL
LI
IS
SH
H
53
LECOASPIRA 690
LECOASPIRA 690 M0S09377 1Q06:Layout 1 14/01/2011 11.44 Pagina 53
Vacuum-Manual.com Manuals
Downloaded from

Polti declines liability for any damage or ac-
cident derived from any use of the appli-
ance which is not in conformity with the in-
structions contained in this booklet
A
AT TT TE EN NT TI IO ON N
Directive 2002/96/EC (Waste Electrical and
Electronic Equipment - WEEE): information for
users
This product complies with EU Directive
2002/96/EC.
The crossed-out wastebasket symbol
on the appliance means that at the
end of its useful lifespan, the product
must be disposed of separately from
ordinary household wastes.
The user is responsible for delivering the appli-
ance to an appropriate collection facility at the
end of its useful lifespan.
Appropriate separate collection to permit recy-
cling, treatment and environmentally compati-
ble disposal helps to prevent negative impact
on the environment and human health and pro-
motes the recycling of the materials making up
the product. For more information on available
collection facilities, contact your local waste
collection service or the shop where you
bought this appliance.
P
PR RE EP PA AR RA AT TI IO ON N F FO OR R U US SE E
• Unscrew the patented safety cap (7) (Fig.1)
and fill the boiler with not more than 1.1 litres
of water, using the filler funnel (U). Make
sure that the water does not overflow, and
that space is left in the boiler for the steam to
form.
• Normal tapwater can be used. Water by its
nature contains magnesium, mineral salts
and other deposits which in hard water areas
can cause limescale build up in the boiler. It
is essential to swill it out with tapwater every
3 or 4 uses. In hardwater areas, we recom-
mend with every 3-4 uses you add ONLY IN
THE BOILER our KALSTOP, a special natu-
ral-base decalcifier which inhibits and breaks
down limescale. This is a preventive against
limescale build-up and protects the metal
walls of the boiler. KALSTOP is available
from Polti dealers or by mail-order from your
Polti Service Centre.
•We recommend only using original Polti
products as other products may not be
suitable for use with Polti appliances and
may cause serious damage.
•Never use distilled water or scented wa-
ter.
• MAKE SURE the rubber gasket is present in-
side the safety cap, then screw on the safety
cap (7) to hand tight. Make sure the patented
safety cap is fully and correctly screwed on,
otherwise you may experience steam escap-
ing around the cap.
• Lift the Dirt container handle (22) unhooking
it from its position (Fig. 2) and remove the
container (20) (Fig. 3).
• Turn the container handle (22) as shown in
figure 4, so as to remove the “Eco Active-
Filter” water filter assembly (23).
• Fill the Dirt container (20) with about 1,2
litres of tap water until the MAX level indica-
tor (21) is reached, as in fig. 5.
• Put the filter assembly (23) back into place in
the Dirt container (20) returning it to its initial
position.
• Replace the Dirt container into position.
• Support the handle (22) until it hooks into its
place on the Dirt container (20).
WARNING: Do NOT under any circumstances
put or leave the filler bottle in the water filling
aperture of the appliance when the appliance is
connected to the mains electricity supply. Dan-
ger of burns!
O
OP PE ER RA AT TI IO ON N
• Open the hose connection flap (9); fit the
monobloc plug (B2) by pushing it, without
pressing the button, until you hear the click
of the locking mechanism, then make sure it
is well locked (fig.6).
• To disconnect the monobloc plug (B2) from
the appliance, push the button (B3) and pull
the monobloc so as to separate it from the
appliance (fig.6a).
• Now connect the appliance to the mains.
SUCTION ONLY MODE
• Press suction switch (1). The appliance will
begin to suck.
• To stop suction, simply press suction switch
again (1)
• Using the suction regulator (5) it is possible
to change the suction power according to the
E
EN
NG
GL
LI
IS
SH
H
LECOASPIRA 690
54
LECOASPIRA 690 M0S09377 1Q06:Layout 1 14/01/2011 11.44 Pagina 54
Vacuum-Manual.com Manuals
Downloaded from

type of cleaning required, or to stop suction
immediately in case of accidental suction
(e.g. curtains). It is advisable to work with the
suction regulator open on curtains, carpets,
and sofas, etc. Move the suction regulator
forward until the hole on the handle is visible.
To return to maximum power, move the suc-
tion regulator backward, gradually covering
the hole.
STEAM ONLY MODE
• Press the boiler switch (2) which will light up.
• Wait for the pressure indicator light (4) goes
out. When it does, Lecoaspira is ready to
generate steam.
• You may now deliver steam by pressing the
steam button (A3) on the handle.
• If you decide not to use the steam any
longer, you may switch off the boiler by
pressing the boiler switch (2).
STEAM + SUCTION MODE
You can use the steam and suction modes to-
gether by activating both as described above.
L
LA AC CK K O OF F W WA AT TE ER R I IN N T TH HE E B BO OI IL LE ER R
Lack of water in the boiler will be shown by the
indicator light (3). In order to continue working,
proceed as described in the section
“PATENTED SAFETY CAP”.
P
PA AT TE EN NT TE ED D S SA AF FE ET TY Y C CA AP P
This appliance is equipped with a patented sa-
fety cap, which prevents opening of the boiler
as long as there is any pressure remaining in-
side. This is an important and indispensable
safety device and it is necessary to follow cer-
tain procedures when re-filling the tank. When
you have used up all the water in the tank, pre-
ceed as follows:
• Switch off the machine at the boiler switch
(2).
• Disconnect the power supply cable (13) from
the mains.
• Unscrew the safety cap (7) anti-clockwise.
• Wait for a good few minutes to allow the boi-
ler to cool down.
• When the boiler is cool, proceed to carefully
refill it as described in the paragraph headed
PREPARATION FOR USE.
WARNING: When REfilling the boiler always
pour gradually into it only very small quanti-
ties at first of HOT, not cold water, so as to
avoid spitting. KEEP FACE AND EXPOSED
SKIN WELL AWAY FROM THE APERTURE.
R
RE EG GU UL LA AT TI IO ON N O OF F T TH HE E S ST TE EA AM M F FL LO OW W
You can optimise the steam flow by means of
the control knob (8) (Fig. 7).
To obtain a higher flow rate turn the knob in a
clockwise direction. When the knob is turned in
an anti-clockwise direction, the flow rate de-
creases.
High flow rate of steam: to remove caked dirt,
stains, grease and to sanitise;
Normal flow rate of steam: for wall-to-wall and
loose carpeting, windows, floors;
Low flow rate of steam: for spraying plants,
cleaning delicate fabrics, wallpaper.
S
SU UP PP PL LY Y C CA AB BL LE E S ST TO OR RA AG GE E
Before putting away Vaporetto Lecoaspira,
store the supply cable (13) in its compartment
(15) proceeding as follows:
• Take out the Dirt container (20) as indicated
in the paragraph “preparation for use”.
• Manually wind the cable evenly and put it in
the storage (15), making it go through the
power supply cable channel (14) (Fig.8).
• Put the Dirt container (20) back in its place
making sure it is correctly positioned.
U
US SE E O OF F T TH HE E A AC CC CE ES SS SO OR RI IE ES S
H
HO OL LD DE ER R
The accessories holder (16) allows you to fix
the tube with the brush mounted on it on the
body of the appliance.
To attach the hose to the appliance, slide the
hook on the hose into the accessories holder
slot on the appliance (Fig. 9).
C
CO ON NN NE EC CT TI IO ON N O OF F A AC CC CE ES SS SO OR RI IE ES S
All the Lecoaspira accessory tools can be con-
nected to the handle (A2) or to the extension
tubes (D).
To connect accessories for suction and steam-
ing (D-E-K-N) proceed as follows:
• connect the handle or the extension tube to
the required accessory until the connector
E
EN
NG
GL
LI
IS
SH
H
55
LECOASPIRA 690
LECOASPIRA 690 M0S09377 1Q06:Layout 1 14/01/2011 11.44 Pagina 55
Vacuum-Manual.com Manuals
Downloaded from

button (C) is hooked (Fig. A)
• to disconnect the accessory, just keep the
connector button pressed (C) and separate
the two parts (Fig. B)
• before using the accessories check they are
fully connected.
To connect the accessories for suction only (F-
M-Q-R-T) just push on, without hooking with
connector button (C).
WARNING: in this situation, it is important not
to press the steam button (A3), to avoid steam
coming out accidentally.
S
SU UC CT TI IO ON N O OF F S SO OL LI ID DS S A AN ND D L LI IQ QU UI ID DS S
This appliance can be used to suck up dust or
liquids equally easily.
However, if the water in the filter is very dirty it
should be replaced proceeding as described in
the section “Emptying and cleaning the Dirt
container”.
When the dirt sucked in reaches the maximum
permitted level in the Dirt container (20), suc-
tion is stopped automatically by the safety float
provided for this purpose (you will notice that
the engine speed has increased).
ATTENTION: switch off the appliance, and only
switch on again after restoring the water level
in the conteiner as described in the “emptying
and cleaning the Dirt container” paragraph.
IMMEDIATE RESTART WITHOUT RESTOR-
ING THE WATER LEVEL CAN DAMAGE THE
AIR OUTLET FILTER.
Before resuming your cleaning operations, pro-
ceed as illustrated in the section “Emptying and
cleaning the Dirt container”, and then top up
the level of the water in the container.
B
BI IO OE EC CO OL LO OG GI IC CO O
NB DO NOT USE BIOECOLOGICO OR
OTHER PRODUCTS IN THE STEAM GENE-
RATOR TANK, BUT ONLY IN THE DIRT CON-
TAINER (20).
Bioecologico is an anti-foaming and deodoris-
ing product based on natural substances which
prevents foaming inside the water filter thus
ensuring a correct working of the appliance. Di-
luted inside the dirt collection tank, Bioeco-
logico also acts as an effective deodoriser
while the appliance is running, and thanks to its
composition which contains Tea Tree and other
natural substances, it prevents bad smells in-
side the dirt collection tank and releases a
fresh clean fragrance in the environment.
Use:
• shake the bottle before use and remove the
lid;
• hold the bottle upright and squeeze 5 ml into
the dispenser. Stop squeezing and pour the
contents of the dispenser into the dirt contai-
ner of the appliance;
• add water according to the instructions of the
appliance.
• use the recommended quantity of Bioecolo-
gico at any refill of the dirt collection tank.
• recommended quantity: 5 ml
Note: a possible change in colour of the liquid
does not alter the functional character and the
efficiency of the product.
Do not swallow. Keep out of the reach of
children.
CONTAINS: Eugenol, Citral, Cinnamal*
Contents: 100 ml
Bioecologico is available in pine or citrus
scents.
Bioecologico is available to purchase from your
local Polti retailer.
*May cause allergic reaction (in direct contact
with the skin).
E
EM MP PT TY YI IN NG G A AN ND D C CL LE EA AN NI IN NG G T TH HE E
W
WA AT TE ER R C CO ON NT TA AI IN NE ER R
Switch off the appliance at the main switch (1)
and disconnect the supply cable from the
mains.
Lift the Dirt container (20) out of its compart-
ment by the container handle (22) (Fig.3).
Turn the handle and take out the “EcoActive-
Filter” water filter assembly (23), as in picture 4.
Empty the container tilting it towards the small
groove (Fig. 10).
Pull the elbow tube (27) away from the net filter
housing (26) until it is removed (Fig. 11a).
Take all the components apart and rinse them
in running water. If the filter sponge has any
tears, replace it. Filters etc are available as a
kit, available by mail-order the Polti Service
Centre.
A cleaning brush (20-A) is supplied for easy
E
EN
NG
GL
LI
IS
SH
H
LECOASPIRA 690
56
LECOASPIRA 690 M0S09377 1Q06:Layout 1 14/01/2011 11.44 Pagina 56
Vacuum-Manual.com Manuals
Downloaded from

cleaning of the Dirt container (20); use it also to
clean the appliance’s hose connections and the
inside of tools.
NOTE: Do not use the brush for cleaning the
outside of the appliance
If you wish to continue working, top up the level
of the water. Put the “EcoActiveFilter” water fil-
ter assembly (23) back into the Dirt container
(20).
ATTENTION: make the arrow on the elbow
tube (27) coincide with the mark on the net filter
housing (26) (Fig.11b). Put the Dirt container
(20) back in its place as described in the
“preparation for use” paragraph.
NOTE: make sure you empty the Dirt container
(20) before putting your Vaporetto Lecoaspira
away. One of the great advantages of Va-
poretto Lecoaspira is precisely the fact that it is
possible to put it away clean.
How to clean the bucket:
As it is possible to suction up liquids, it is very
easy to clean the bucket in your Lecoaspira.
When you have finished cleaning, empty the
bucket as described and put it back in its hous-
ing in the machine.
Suction up about one and a half litres of clean
water, turning on the suction for a few seconds.
The whirlpool created inside the bucket will
rinse the walls and dislodge any dirt. Clean wa-
ter cleans the inside of the tubes as it passes
through them. Now empty the bucket again and
put the Vaporetto Lecoaspira away.
T
TI IP P F FO OR R U US SI IN NG G T TH HE E A AC CC CE ES SS SO OR RI IE ES S
DO NOT USE STEAM FUNCTION ON DRAY-
LON, VELVET, LEATHER OR OTHER SENSI-
TIVE SURFACES.
If in doubt about the effect of steam on other
surfaces, consult the manufacturer’s instruc-
tions and always proceed only after carrying
out a test on a hidden part or a sample. Allow
the area treated with steam to dry and then
check whether any changes in colour or defor-
mations have occurred before proceeding fur-
ther, ensuring exactly the same steam power
and distance as in the test.
When cleaning wooden surfaces (furniture,
doors, etc.) and brick floors always proceed
with caution since excessive use of steam
could damage the wax, the polish or the colour
of the surface to be cleaned. It is therefore ad-
visable to apply the steam to these surfaces
only for short periods at a time or to clean them
with a cloth that has been treated with steam.
On particularly delicate surfaces (e.g. synthetic
materials, enamelled surfaces, etc.) we
strongly recommend using the steam at its low-
est output power.
When cleaning glazed surfaces, if the weather
is particularly cold pre-heat the glass working
at distance of about 50 cm away from the sur-
face. To take care of your plants, we recom-
mend spraying them from a distance of at least
50 cm.
U
UN NI IV VE ER RS SA AL L B BR RU US SH H ( (E E) )
It is advisable to use this brush to clean large
surfaces, tiled or marble covered floors, par-
quet, carpets etc., using the following inserts
supplied with it.
• Bristle inserts (E2), for use when vacuuming
only.
• Liquid suction inserts (E3), to pick up liquids;
recommended for smooth surfaces.
• Fitted carpet inserts (E4), suitable for fitted
and loose carpets.
The universal brush can be connected directly
to the handle, or to the hose by means of the
extension tubes (D).
ASSEMBLING INSERTS:
to change the inserts, slide out the insert from
its position on the brush and slid in the replace-
ment (Fig.C). When assembling the two inserts
with bristles (E2), position the solid insert to-
wards the BACK of the brush and the grooved
insert towards the front.
When assembling the inserts for suctioning up
liquids (E3), take care to ensure that their
SMOOTH side faces inward.
1
12 20 0° ° S ST TE EA AM M- -S SU UC CT TI IO ON N A AC CC CE ES SS SO OR RY Y
(
(K K) )
Use this accessory to clean areas that are diffi-
cult to reach with other accessories. The 120°
accessory may be used for:
• treating stains on carpeting or loose carpets,
before going over them with the brush;
• cleaning stainless steel, windows, mirrors,
E
EN
NG
GL
LI
IS
SH
H
57
LECOASPIRA 690
LECOASPIRA 690 M0S09377 1Q06:Layout 1 14/01/2011 11.44 Pagina 57
Vacuum-Manual.com Manuals
Downloaded from