Polygroup NOMA ADVANCED 151-8410-6 User manual

7 ½' AURORA MUSIC AND LIGHT SHOW TREE
model no. 151-8410-6 | Toll-free number: 1-866-827-4985
3. Identify all tree sections (See Fig. B) by the stickers on them, and start assembling from bottom to top.
4. Open the protective cap of pole, and insert the pole into the stand. Allow all branches to fall down into place. Check to make
sure that all wires are free from branch hinges.
1. Choose a level surface near a wall outlet.
2. Assemble the tree stand. (See Fig. A)
Congratulations on purchasing your new Aurora Music and Light Show with 10 Pre-set Options.
This tree comes with an automatic power pole lighting system, allowing you to set up your tree and light it up in minutes!
Carefully follow the instructions below to quickly and technology, allowing up your new tree.
Fig. B - Tree and Light Assembly
TREE ASSEMBLY INSTRUCTIONS
Fig. A - Tree Stand Assembly
Click
Swivel the legs of the stand until they snap
into position. The legs should be evenly
spaced once this step is complete. Place the
tree stand on a level surface.
To close the stand, press the metal button
and fold the legs together.
Instruction Manual
For indoor use only
Retain carton for storage purposes
IMPORTANT: Please read this manual carefully before assembly and save it for reference.
Tree Top
Section 2
Section 1
Insert Green
Label Extension
Cord into Adaptor
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120 V, 60 H, 0.83 A
Output: 24 V DC, 2 A
Align both arrows
in a straight line
before sliding
down to insert
Open the
cap cover
Do Not Tamper
With Internal Parts
A D V A N C E D TM
MC
Foot Pedal
On/Off Switch

5. Shape the tree section one branch at a time. Start with the tips closest to the pole and move outwards. Fan all the tips out in
alternating directions, and slightly upsweep them for a natural look. (See Fig. C)
6. Repeat Steps 4 and 5 for the upper tree section(s) until tree top is installed and shaped.
7. Connect plug with adaptor, and plug it in to the wall outlet as indicated in Fig. B.
8. Step back and view your tree. Shift branches to fill any gaps.Your Christmas tree is now ready to be decorated.
Top view Side view
Fig. C
1. Unplug from power source, and detach plug from adaptor. Remove all ornaments and decorations.
2. Disassemble the tree from top to bottom. Gently lift pole straight up to remove from the lower section, and fold all branches
toward the pole.
3. Close the protective caps on the poles to avoid damaging the internal parts. (See Fig. D)
4. Place the disassembled tree into the shipping box and tape it shut.
5. Store your tree in a cool, dry place away from sunlight. Exposure to excessive heat or
humidity may damage your tree.
6. Battery must be recycled or disposed of properly. Dispose of as per the requirements
of your local municipality.
7. Keep out of reach of pets and children.
STORAGE INSTRUCTIONS
Fig. D
REMOTE CONTROL INSTRUCTIONS
Remove the insulation tab of the remote control.
Insulation Tab
Play
Play Next
Colour-Changing (RGB Lights)
Press this button to play all 7 songs/light shows
in sequence repeatedly.Once pressed, the
sequence will always play from the start.
Song List:
1. Carol of the Sugar Plums
2. Deck the Halls
3. Candela Teaser
4. Joy to The World/O Come All Ye Faithful
5.We Wish You a Merry Jingle Bells
6. Russian Dance
7.Toys on the Housetop
Press this button to skip to the next song/light
show when the light show is on.
Press this button to select from the preset light
colours/effects (1-3) or to turn off the lights.
1. Random Light Colours/Effects
("Beautiful Movement": Pre-programmed light
effects cycle without music accompaniment)
2.Warm White Steady Glow
3. Multi-colour Steady Glow
4. Off
Press once to increase the
volume by one level. A total
of 10 levels can be selected.
Key Functions
Volume Up
Press once to decrease the
volume by one level. A total
of 10 levels can be selected.
Volume Down

Songs can be played via an external speaker. Simply connect the Music Controller Speaker to an external speaker with a 3.5 mm
audio cable. Once connected to an external speaker, there will be no sound output from the conductor speaker.
To restore the speaker to its factory settings,
press the small RESET button located beside
the AUX outlet for 5 seconds.
Aux Outlet
AUX
Music Controller Speaker
SYMPHONY
HOLIDAY
TM
AUX
1. Loosen the screw of the battery cover with a screwdriver (not included).
Battery Replacement
2. Replace the used battery with a new CR2032 button cell battery (not included). Make sure that the battery is installed with the
correct polarity (+ and -).
3. Retighten the screw to close and secure the battery cover.
WARNING
1. This remote controller is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children.
Ingestion of such batteries has been known to cause death.
2. Small parts, keep batteries out of reach of children.
3. Do not expose the remote controller to moisture.
4. Remove battery when not used for an extended period of time, or when depleted.
5. Dispose of used battery properly.
6. Use only CR2032 battery for the remote controller.
7. Clean the battery contact surfaces gently prior to battery installation.
8. Do not dispose of batteries in fire. Batteries may explode or leak.
WARNING:
This product may potentially trigger seizures for people with photosensitive epilepsy when using the motion effect light modes.

Troubleshooting
Warranty
Made in China
Imported by
Noma Canada,Toronto, Canada M4S 2B8
DATE CODE: 22320
If Tree Does Not Illuminate / Some Bulbs Do Not Light or Flicker
1. Check to make sure that all plugs and adaptor are properly connected as indicated in Fig. B. (If the tree comes with a foot pedal, try
stepping on the ON/OFF button.)
2.Turn the poles gently to make sure pole-to-pole connection is secured.
3. Check for loose connection between light string plugs and extension cords.
Each tree includes hinge pins and washers.
If extra parts are needed, please contact our customer service centre.
SPARE PARTS
Loose Hinge Pin
1. Place the branch into the hinge bracket. (See Fig. E)
2. Insert a new hinge pin all through the holes of bracket,
and secure with a washer. (See Fig. E - close up)
This product carries a five (5) year warranty against defects in workmanship and materials. Noma Canada agrees to replace
a defective product, within the stated warranty period, when returned to the place of purchase with proof of purchase.This
product is not guaranteed against wear or breakage due to misuse and/or abuse.
CAUTION:
To reduce the risk of fire and electric shock:
a) Use only the power supply that was provided with this product. Using a different adaptor will damage the lights and may
cause fire, or electric shock hazard.
b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal.
c) Do not mount or support strings in a manner that can cut or damage wire insulation.
Fig. E