Polygroup TG70M4073L03 User manual

ASSEMBLY INSTRUCTIONS MADE IN CHINA
MODEL #: TG70M4073L03
*Electrical Rating For The Tree
(For Indoor Use Only)
Input:120VAC, 60Hz, 0.16A
Output: 29V DC 0.28A
Fig. B - Tree and Light Assembly
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Congratulations on purchasing your new tree from Polygroup®! This tree features Quick Set® and
Quick FoldTM and Simple Shape technology to make set up and storage quick and easy. Carefully follow the
instructions below on how to quickly and easily set up your new tree.
TREE ASSEMBLY INSTRUCTIONS
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from bottom to tree top.Start with the bottom section and remove the protective cap
before inserting into the assembled stand.Make sure the pole is firmly inserted and secured into the stand.
Section 3
Section 2
Section 1
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
5. SET UP
• Remove tree stand and tree sections from box.
• Insert Section 1 into the tree stand.
• A. Locate“Pull Here”tab and corresponding Cinch Handle
B.Hold Cinch Clip firmly with one hand and press down on clip
C. With Cinch Clip depressed, pull clip away from tree until all
branches are released
• Remove the protective cap of Section 1 and add Section 2.
• Deploy the Section 2 like Step 3.
• Remove the protective cap of Section 2 and add Section 3.
6. Allow branches to fall into place or gently pull up and out.When
adjusting branches,be sure that all wires are free of branch hinges.
7. Just plug the adaptor (connecting with the tree power cord) into
t he wall outlet (See Fig. B), your entire tree should now be lit.If
some bulbs do not light or flickers,search for any loose plugs and/or
broken, loose or missing bulbs.Replace bulbs promptly in order to
maintain the performance and life expectancy of your pre-lit tree.
Cinch Clip
Cinch
Handle A
B
C
PULL HERE
Adaptor
To Be Plugged
Into Wall
Outlet
Fig. A - Tree Stand Assembly
Click
Pull apart the legs of the stand so that they
are snapped into an x-shape, place the tree
stand on a level surface.
To close the stand, press the metal button
and fold the legs together.

ASSEMBLY INSTRUCTIONS MADE IN CHINA
Top view Side view
Fig. C
STORAGE INSTRUCTIONS
TROUBLE SHOOTING TIPS
SPARE PARTS
1. Unplug extension cord from the wall outlet first and then remove
all ornaments and decorations.
• Detach Section 3 and store it into box.
• A. Cover the protective cap of the Section 2.
B. Hold Cinch Handle with right hand.
C. Hold Cinch Clip firmly with left hand and press down
on clip. Pull handle towards you while pushing away cinch
clip until the upper branches of Section 2 are folded completely.
• Fold the lower layer of Section 2 like Step 2.
• Detach Section 2 and put it into the box.
• Cover the protective cap of Section 1 then fold same as
Section 2.
• Detach Section 1 from tree stand and pack them into the box.
2. When not in use,please store your tree in a cool, dry place away
from sunlight. Exposing your tree to excessive heat or humidity
may damage your tree.
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure that all plugs are properly connected and power cord is plugged into the wall
outlet. (If the tree comes with a foot pedal, try stepping on the on/off button).
2.Turning the poles gently to make sure pole to pole are connected into place.
3. Check for loose connection between light string plugs and extension cords.
4. Please check for loose, broken or missing light bulbs and replace as needed.
1. Extra hinge pins are included for repairing the hinges. Place the branch into the slot of the bracket.
2. Insert a new hinge pin through the hole and secure using the retainer washer.(See Fig. D)
Each tree includes hinge pins/washers, and for pre-lit trees
spare bulbs and fuses are also included.If extra parts are
needed, please contact our customer service center.
Loose Hinge Pin
Fig.D
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact
us at 1-888-919-0070 or visit our website at www.polygroup.com. One of our customer service
representatives will be happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
Customer Name:
Address:(No P.O. Boxes)
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
8. This tree is constructed with Quick Set® and Simple Shape technology. Shaping is not necessary; you just need
to slightly upsweep all branch tips for a uniform look (see Fig.C) and shift branches to fill any gaps.Your
Christmas tree is now ready to be decorated.
A
B
C
WARNING
1. Use only power adaptor supplied with this product, using a different adaptor will damage the lights.
and cause fire, electrical shock hazards.
2. FOR INDOOR USE ONLY.