Polygroup TGC0M6010C03 User manual

ASSEMBLY INSTRUCTIONS MADE IN CHINA
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from Polygroup®! This tree comes with Quick Set®
technology which takes less than 10 minutes to set up and light up!
Carefully follow the instructions below on how to assemble your new tree quickly and at ease:
1. Choose an appropriate location near a wall outlet.
2. Assemble the tree stand (Fig. A) and place on a level surface.
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4.
Assemble the tree from the bottom to the top. Remove protective cap, and insert the pole of Section
2 into Section 1. Insert the pole of the Section 3 into Section 2. Insert the pole of Section 4 into
Section 3. Insert the pole of the tree top into Section 4. Ensure that all poles are firmly secured . Be
sure that all wires are free of branch hinges.
5. Insert green label plug into the wall outlet (Fig. B).Your entire tree should now be lit.
6. Shape the tree from the bottom to the top. Start with the branches farthest from the pole – fan out
in a star shape (Fig. C), and continue until the entire tree is shaped.
Top view Side view
Fig. C
MODEL #: TGC0M6010C03 2019 TREE LETTER "S"
Sku # 5064571/220293
*Electrical Rating For The Tree
(For Indoor Use Only)
4.76A 120V 60Hz
Fig. B – Tree and Light Assembly
Tree Top
Section 2
Section 3
Section 4
Section 1
Pull apart tree stand legs until they snap and
form an ‘X’ shape.
Insert the tree bottom into the assembled
stand. Insert and tighten the eye bolt into the
stand until firmly secured.
To close the stand, press the metal button and
fold the legs together.
Fig. A - Tree Stand Assembly Eye Bolt
Click
Eye Bolt
Insert Green
Label Plug Into
Wall Outlet
Do Not Tamper
Internal Parts
Open the
protective
cap
Do Not Tamper
Internal Parts
Open the
protective
cap

ASSEMBLY INSTRUCTIONS MADE IN CHINA
7. Slightly upsweep all tips for a fuller, uniform look. Shift branches to fill in any gaps.Your Christmas
tree is now ready to be decorated.
Distributed by: Hobby Lobby Stores, Inc. • Oklahoma City, OK 73179 • www.hobbylobby.com
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance or missing parts, Do Not Return To Place Of Purchase. Please
contact us at 1-888-919-0070 or visit our website at www.polygroupstore.com. One of our
customer service representatives will be happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
Customer Name:
Address (NO P.O. Boxes):
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
STORAGE INSTRUCTIONS
1. Disconnect green label plug from the wall outlet.Then remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Gently lift the pole straight up to remove from the
section below, and fold all branches toward the pole.
3. Close the protective cap on the poles to avoid damaging the
internal parts (Fig. C).
4. Carefully place all tree sections into the shipping box and tape
it shut.
5. Store your tree in a cool, dry place away from sunlight.
Exposure to excessive heat or humidity may damage your tree.
TROUBLESHOOTING TIPS
If The Tree Does Not Illuminate / Some Bulbs Do Not Light or Flicker
1. Check to make sure that the green label plug is properly and firmly connected to the wall outlet.
2.Turn the poles gently to make sure pole to pole are firmly connected.
3. Disconnect from power source, then check for loose, broken or missing light bulbs and replace as
needed.
4. Disconnect from power source, then check for blown fuses and replace as needed.
NOTE: Please make sure to use appropriate spare fuses as indicated on the label plug.
Loose Hinge Pin
1. Place the branch into the slot of bracket.
2. Insert a new hinge pin (included) through the hole, and secure using the retainer washer (Fig. D).
SPARE PARTS
This tree includes hinge pins and washers, and
spare bulbs and fuses. If extra parts are needed,
please contact our customer service center.
Fig. D
Fig. C