Polygroup HOLIDAY SYMPHONY Evergreen Classics Manual

Holiday Symphony Tree
FOR INDOOR USE ONLY
Patent: US 10,588,208 B1
Instructions Guide
MUSIC LIGHT SHOW
HOLIDAY
SYMPHONY™

IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
1. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications,
connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper
installation.
2. This seasonal use product is not intended for permanent installation or use.
3. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
4. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
5. Do not let lamps rest on the supply cord or on any wire.
6. Unplug the product when leaving the house, or when retiring for the night, (or if left unattended).
7. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed
where small children can reach it.
8. Do not use this product for other than its intended use.
9. Do not hang ornaments or other objects from cord, wire, or light string.
10. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
11. Do not cover the product with cloth, paper or any material not part of the product when in use.
12. Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS.
1. Set up the tree according to the number tag sequence attached to each tree section from the bottom to the top. Section #1 from the bottom on
the tree stand, followed by Section #2 on top, and so on. Random setup will result in electrical malfunction.
2. Before first use, remove all protective packing materials around the Music Controller Speaker.
Do not cover the Music Controller Speaker with unnecessary items. This may cause distorted sound and damage the speaker. It can also cause
the speaker to burn out.
3. To reduce the risk of fire and electric shock:
a) Use only the power supply that is provided with this product. Using a different adapter will damage the lights and may cause fire,
or electrical shock hazards;
b) Do not install on trees that have needles, leaves or branches covering with metal or materials which look like metal;
c) Do not mount or support strings in a manner that can cut or damage wire insulation.
4. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
5. Do not connect the chain to the supply while it is in the packing.
6. The lamps are not replaceable.
7. Do not interconnect parts of this lighting chain with parts of another manufacturer's lighting chain.
8. Interconnection shall be made only by the use of the supplied connectors. Any open ends must be sealed-off before use.
WARNING
CAUTION
ITEM #: TG76P5359P32
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local
government for information regarding the collection systems available. If electrical appliances are disposed of in landfills
or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and
well-being.

1. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the
lampholders or enclosures, loose connections, or exposed copper wire.
2. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue
strain or stress on the product conductors, connections, and wires.
3. When not in use, store neatly in a cool, dry location protected from sunlight.
Use and Care Instructions
AC Adapter
Input: 120 V~ / 60 Hz, 0.83 A
Output: DC 24 V, 2 A
Controller: DC 24 V, 2 A
Technical Specifications
2

Physical Setup
12 3

c. d.
e. f.
1
2
3
4

g.

Remote Control Instructions
Remove the insulation tab of the remote controller.
Insulation Tab
6

This product may potentially trigger seizures for people with photosensitive epilepsy when using the motion effect light modes.
Play
Play Next
Color-Changing (RGB Lights)
Press this button to play all 7 songs/light shows
in sequence repeatedly. Once pressed, the
sequence will always play from the start.
Song List:
1. Carol of the Sugar Plums
2. Deck the Halls
3. Candela Teaser
4. Joy to The World/O Come All Ye Faithful
5. We Wish You a Merry Jingle Bells
6. Russian Dance
7. Toys on the Housetop
Press this button to skip to the next song/light
show when the light show is on.
Press this button to select from the preset light
colors/effects (1-3) or to turn off the lights.
Press once to increase the
volume by one level, a total
of 10 levels can be adjusted.
Key Functions
Volume Up
Press once to decrease the
volume by one level, a total
of 10 levels can be adjusted.
Volume Down
1. Random Light Colors/Effects
("Beautiful Movement": Pre-programmed light
effects cycle without music accompaniment)
2. Warm White Steady Glow
3. Warm White Twinkling
4. Multi-Color Steady Glow
5. Multi-Color Twinkling
6. Off

Songs can be played via an external speaker, simply connect the Music Controller Speaker to an external speaker with a 3.5 mm audio cable.
Once connected to an external speaker, there will be no sound output from the conductor speaker.
Aux Outlet
AUX
Aux OutletMusic Controller Speaker
SYMPHONY
HOLIDAY
TM
AUX
8

1. Loosen the screw from the battery cover of the remote controller with a screwdriver (not included).
Battery Replacement
2. Replace the used battery with a new CR2032 button cell battery (not included).
Make sure that the battery is installed with the correct polarity (+ and -).
3. Retighten the screw to close and secure the battery cover.

Loose Hinge Pin
STORAGE INSTRUCTIONS
TROUBLESHOOTING TIPS
1. Unplug from power source, and detach plug from adapter. Remove all ornaments and decorations.
2. Disassemble the tree from top to bottom. Gently lift pole straight up to remove from the lower
section, and fold all branches toward the pole.
3. Close the protective caps on the poles to avoid damaging the internal parts.
4. Place the disassembled tree into the shipping box and tape it shut.
5. Store your tree in a cool, dry place away from sunlight. Exposure to excessive heat or humidity may
damage your tree.
If Tree Does Not Illuminate / Some Bulbs Do Not Light or Flicker
1. Check to make sure that all plugs and adapter are properly connected as indicated.
2. Turn the poles gently to make sure pole-to-pole connection is secured.
1. Place the branch into the hinge bracket.
2. Insert a new hinge pin all through the holes of bracket, and secure with a washer.
1. This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children. Ingestion of such batteries
has been known to cause death.
2. This is a lithium battery which if swallowed has been known to cause death.
3. Small parts, keep batteries out of reach of children.
4. Do not expose the remote controller to moisture.
5. Dispose of used batteries properly（by following directions on batteries),and local laws and regulations regarding the disposal of hazardous waste.
6. Clean the battery contact surfaces prior to battery installation.
7. Remove batteries when not used for an extended period of time, or when depleted.
8. Use only CR2032 button cell battery for remote controller.
9. Do not dispose of batteries in fire – batteries may leak or rupture.
WARNING
This tree includes sets of hinge pins & washers.
If extra parts are needed, please contact our customer service center.
www.polygroupstore.com or [phone].
SPARE PARTS
10

Polygroup®Trading Limited
Unit 606, 6th Floor, Fairmont House,
No.8 Cotton Tree Drive,
Central, Hong Kong