Polygroup TG76P4B15P00 User manual

1
MADE IN CHINA
ASSEMBLY INSTRUCTIONS
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from Polygroup®! This tree comes with Quick Set®
technology - it takes less than 10 minutes to set up and light up! Carefully follow the instructions below
on how to quickly and easily set up your new tree.
1. Choose a level surface near a wall outlet.
2. Assemble the tree stand (See Fig. A).
Fig. A - Tree Stand Assembly
Unfold tree stand legs.Then
slide the locking disc down
until it snaps into place.
MODEL #: TG76P4B15P00
3. Identify all tree sections (See Fig. B) by the tags on them, and start assembling from bottom to top.
4. Open the protective cap of pole, and insert the pole into the stand. Allow all branches fall down into
place. Check to make sure that all wires are free from branch hinges.
5. Shape the tree section one branch at a time.Start with the tips closest to the pole and move outwards.
Fan all the tips out in alternating directions, and slightly upsweep them for a natural look (See Fig. C).
6. Repeat Step 4 and 5 for the upper tree section(s) until tree top is installed and shaped.
7. Connect plug with adapter, and plug it in to the wall outlet as indicated in Fig. B.
8. Step back and view your tree. Shift branches to fill any gaps.Your Christmas tree is now ready to be
decorated.
Top view Side view
Fig. C
Fig. B - Tree and Light Assembly
Tree Top
Section 2
Section 1
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V-60Hz, 0.83A
Output: 24V DC 2A
Plug Adapter
Into Wall
Outlet
Do Not Tamper
Internal Parts
Open the
protective
cap
Do Not Tamper
Internal Parts
Open the
protective
cap
Insert Green
Label Extension
Cord into Adapter

2
ASSEMBLY INSTRUCTIONS MADE IN CHINA
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact
us at 1-888-919-0070 or visit our website at v. One of our customer service representatives will be
happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
Customer Name:
Address:(No P.O. Boxes)
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
This tree includes sets of hinge pins & washers, and spare bulbs. If extra parts are needed, please contact
our customer service center.
SPARE PARTS
STORAGE INSTRUCTIONS
TROUBLESHOOTING TIPS
1. Unplug from power source, and detach plug from adapter. Remove all ornaments and decorations.
2. Disassemble the tree from top to bottom. Gently lift pole straight up to remove from the lower section,
and fold all branches toward the pole.
3. Close the protective caps on the poles to avoid damaging the internal
parts (See Fig. D).
4. Place the disassembled tree into the shipping box and tape it shut.
5. Store your tree in a cool, dry place away from sunlight. Exposure to
excessive heat or humidity may damage your tree.
6. Keep out of reach of pets and children.
If Tree Does Not Illuminate / Some Bulbs Do Not Light or Flicker
1. Check to make sure that all plugs and adapter are properly connected as indicated in Fig. B.
2.Turn the poles gently to make sure pole to pole sections are connected properly
3. Check for loose connection between light string plugs and extension cords.
4. Check for loose, broken or missing bulbs, and replace as needed (See LAMP REPLACEMENT).
1. Place the branch into the hinge bracket (See Fig. E).
2. Insert a new hinge pin all through the holes of bracket,
and secure with a washer (See Fig. E - close up).
Loose Hinge Pin
Fig. E
Fig. D
CAUTION:
1.To reduce the risk of fire and electric shock:
a) Use only the power supply that was provided with this product;
b) Do not install on trees having needles, leaves or branch covering of metal or materials which look
like metal, and
c) Do not mount or support strings in a manner that can cut or damage wire insulation.
2. Use only the adaptor supplied with this product. Using a different adaptor will damage the lights and
may cause fire, or electrical shock hazards.
Lamp Replacement
Step 1. Unplug from power source, by pulling out the adapter itself - do not pull on the power cord.
Step 2. Lift up the lamp lock tab, and
pull the bulb and its plastic base
straight out from the lampholder.
(For reference only)
Step 3. Replace with a new
spare LED lamp (included).

3
ASSEMBLY INSTRUCTIONS MADE IN CHINA
Multi Color Steady Glow
Color Wheel
Faster Light Effect For
Preset Motion
Slower Light Effect For
Preset Motion
Previous Preset Motion Effect
Tap or to select from the
10 preset motion effects:
• Warm White Twinkle
• Color Twinkle
• Fading
• Multi Ball
• Color Switching
• Collision
• Wave
• Waterfall
• Rainbow Shower
• Rainbow
Tap to display all lights in
multi color steady glow
Customizable color selection
Tap to display all lights in
warm white steady glow
REMOTE CONTROL INSTRUCTIONS
ON/OFF
Warm White Steady Glow
Brightness Up
Next Preset Motion Effect
For individuals with photosensitive epilepsy or similar
conditions, please see the Warnings section.
Brightness Down
1. Slide open the battery cover.
2. Replace with a new CR2032 button cell battery with
correct polarities (+/-) as indicated.
3. Slide the battery cover closed.
Battery Replacement
Remove insulation
tab before use.
Battery Cover
WARNING: This product may potentially trigger seizures for people with photosensitive epilepsy when using
the motion effect light modes.
WARNING
1. This product is powered by a lithium battery. Due to their small size,
lithium batteries can easily be swallowed by children. Ingestion of
such batteries has been known to cause death.
2. This product contains a lithium battery which if swallowed has been
known to cause death.
3. Do not expose the product to moisture.
4. Remove batteries when not used for an extended period of time,
or when depleted.
5. Dispose of used batteries properly by following directions on batteries.
6. Use only CR2032 batteries for the remote controller.
7. Clean the battery contact surfaces gently prior to battery installation.
8. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY
EXPLODE OR LEAK.