Polygroup TG76M2S99L01 User manual

ASSEMBLY INSTRUCTIONS MADE IN CHINA
MODEL #: TG76M2S99L01 2018 TREE LETTER "T"
Sku # 5622386
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V, 60Hz, 0.25A Max.
Output: 29V DC, 0.45A
Fig. B – Tree and Light Assembly
Tree Top
Section 2
Section 1
Fig. A - Tree Stand Assembly
Click
Pull apart tree stand legs until they
snap and form an ‘X’ shape.
To close the stand, press the metal
button and fold the legs together.
Do Not Tamper
Internal Parts
Open the
protective
cap
Do Not Tamper
Internal Parts
Open the
protective
cap
Insert Adaptor
Into Wall
Outlet
Insert Green
Label Extension
Cord into Adaptor
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from Polygroup®! This tree comes with Quick Set®
and Simple ShapeTM technology which takes less than 10 minutes to set up and light up!
Carefully follow the instructions below on how to assemble your new tree quickly and at ease:
1. Choose an appropriate location near a wall outlet.
2. Assemble the tree stand (Fig. A) and place on a level surface.
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Remove protective cap, and insert the pole to the
assembled stand until firmly secured. Be sure that all wires are free of branch hinges.
5. Insert green label extension cord into adaptor and adaptor insert into the wall outlet. (See Fig. B),
Your entire tree should now be lit.
6.This tree is constructed with Quick Set® and Simple ShapeTM technology. Shaping is not necessary;
you just need to slightly upsweep all tips and shift branches to fill in any gaps for a fuller, uniform
look.Your Christmas tree is now ready to be decorated.

ASSEMBLY INSTRUCTIONS MADE IN CHINA
STORAGE INSTRUCTIONS
1. Disconnect green label plug from the wall outlet.Then remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Gently lift the pole straight up to remove from the
section below, and fold all branches toward the pole.
3. Close the protective cap on the poles to avoid damaging the
internal parts (Fig. D).
4. Carefully place all tree sections into the shipping box and tape
it shut.
5. Store your tree in a cool, dry place away from sunlight.
Exposure to excessive heat or humidity may damage your tree.
TROUBLESHOOTING TIPS
If The Tree Does Not Illuminate / Some Bulbs Do Not Light or Flicker
1. Check to make sure that the green label plug and the adaptor are properly and firmly.
2.Turn the poles gently to make sure pole to pole are firmly connected.
3. Disconnect from power source, then check for loose, broken or missing light bulbs and replace as
needed.
Loose Hinge Pin
1. Place the branch into the slot of bracket.
2. Insert a new hinge pin (included) through the hole, and secure using the retainer washer (Fig. E).
SPARE PARTS
This tree includes hinge pins and washers, and
spare bulbs. If extra parts are needed, please
contact our customer service center.
Fig. E
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance or missing parts, Do Not Return To Place Of Purchase.
Please contact us at 1-888-919-0070 or visit our website at www.polygroup.com. One of our
customer service representatives will be happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
Customer Name:
Address (NO P.O. Boxes):
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
Hobby Lobby Stores, Inc. • Oklahoma City, OK 73179 • www.hobbylobby.com
Fig. D