Polygroup TG76P4751P01 User manual

1
MADE IN CHINA
ASSEMBLY INSTRUCTIONS
TREE ASSEMBLY INSTRUCTIONS
Fig. B - Tree and Light Assembly
Congratulations on purchasing your new tree from Polygroup®! This tree comes with
Quick Set® technology - it takes less than 10 minutes to set up and light up!
Carefully follow the instructions below on how to quickly and easily set up your new tree:
1. Choose a level surface near a wall outlet.
2. Assemble the tree stand (See Fig. A).
Fig. A - Tree Stand Assembly
Unfold tree stand legs.Then
slide the locking disc down
until it snaps into place.
MODEL #: TG76P4751P01
Do Not Tamper
Internal Parts
Open the
protective
cap
Do Not Tamper
Internal Parts
Open the
protective
cap
Tree Top
Section 2
Section 1
3. Identify all tree sections (See Fig. B) by the tags on them, and start assembling from bottom to top.
4. Open the protective cap of pole, and insert the pole into the stand. Allow all branches fall down into
place. Check to make sure that all wires are free from branch hinges.
5. Shape the tree section one branch at a time.Start with the tips closest to the pole and move outwards.
Fan all the tips out in alternating directions, and slightly upsweep them for a natural look (See Fig. C).
6. Repeat Step 4 and 5 for the upper tree section(s) until tree top is installed and shaped.
7. Connect plug with adaptor, and plug it in to the wall outlet as indicated in Fig. B.Your tree should now
be lit. If not, please see TROUBLESHOOTING TIPS.
8. Step back and view your tree. Shift branches to fill any gaps.Your Christmas tree is now ready to be
decorated.
Top view Side view
Fig. C
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V, 60Hz, 0.83A
Output: 24V DC 2A
Plug Adaptor
Into Wall
Outlet
Insert Green Label
Plug into Adaptor
Please scan code to
learn how to shape
and set up your tree

2
ASSEMBLY INSTRUCTIONS MADE IN CHINA
This tree includes sets of hinge pins & washers. If extra parts are needed, please contact our customer
service center.
SPARE PARTS
This tree is equipped with Twinkly RGB LED lights. Simply download the app, and add magic to your tree.
For details, please see the Twinkly Pre-lit Tree Instructions Guide.
STORAGE INSTRUCTIONS
CREATE YOUR TWINKLY LIGHT SHOW
TROUBLESHOOTING TIPS
1. Unplug from power source, and detach plug from adaptor. Remove all ornaments and decorations.
2. Disassemble the tree from top to bottom. Gently lift pole straight up to remove from the lower section,
and fold all branches toward the pole.
3. Close the protective caps on the poles to avoid damaging the internal
parts (See Fig. D).
4. Place the disassembled tree into the shipping box and tape it shut.
5. Store your tree in a cool, dry place away from sunlight. Exposure to
excessive heat or humidity may damage your tree.
If Tree Does Not Illuminate / Some Bulbs Do Not Light or Flicker
1. Check to make sure that all plugs and adaptor are properly connected as indicated in Fig. B.
2.Turn the poles gently to make sure pole-to-pole connection is secured.
1. Place the branch into the hinge bracket (See Fig. E).
2. Insert a new hinge pin all through the holes of bracket,
and secure with a washer (See Fig. E - close up).
Loose Hinge Pin
Fig. E
Fig. D
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact
us at 1-888-919-0070 or visit our website at www.polygroupstore.com. One of our customer service
representatives will be happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
Customer Name:
Address (No P.O.Boxes):
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem: