Polygroup Island Breeze TG50KN218C01 User manual

Part
1
2
3
4
5
6
7
Description
Tree Body
Tree Body
Tree Top
Tree Body
Tree Body
Stand
Tree Body
Quantity
1
1
1
1
1
1
1
8
Tree Top
1
Congratulations on purchasing your new tree from Polygroup®!
Carefully follow the instructions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an
appropriate location near a wall outlet.
MODEL #: TG50KN218C01
TREE ASSEMBLY INSTRUCTIONS
*Electrical Rating For The Tree
(For Indoor and Outdoor Use)
120 V ~60Hz, 0.51A
PACKAGE CONTENTS
MADE IN CHINA
1
ASSEMBLY INSTRUCTIONS
1
2
3
8
7
6
5
4
2. For easy do-it-yourself assembly, the top trees
and pole sections are attached coded labels to
complete installation step by step. Before you
start to assemble your tree, assemble and place
on a level surface. (See Fig.A)
(1) Insert the bottom trunk section 1into the
square metal stand 4.
(2) Insert the trunk section 2into the bottom
trunk section 1.
(3) Insert the tree top 3into the top trunk.
(4) Insert the other bottom trunk section 5into
the square metal stand 4.
(5) Insert the trunk section 6into the bottom
trunk section 5.
(6) Insert the trunk section 7into the middle trunk
section 6.
(7) Insert the tree top 8into the top trunk.
3. Connect the plug into the wall outlet. Your entire
tree should now be lit. If some bulbs do not light
or flickers, search for any bulbs loose, missing or
broken bulbs.
Replace bulbs promptly in order to maintain the
performance of your pre-lit tree.
4. Shape and shift tree branches to fill in any gaps.
Fig.B
Fig.A
Insert
Green Label
Plug Into Wall
Outlet

CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase . Please contact
us at 1-888-919-0070 or visit our website at www.polygroupstore.com. One of our customer service
representatives will be happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
Customer Name:
Address(No P.O. Boxes):
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
STORAGE INSTRUCTIONS:
TROUBLESHOOTING TIPS
For pre-lit trees spare bulbs and fuses are also included. If extra parts are needed, please contact our
customer service center.
SPARE PARTS
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure that all plugs are properly connected according to the color labels
indicated in Fig.B and the power cord is plugged into the wall outlet. Refer to assembly guide for
instructions.
2. Please check for blown fuses at the light string plugs and power cord plug. Replace as needed.
Note: Please make sure to use appropriate replacement fuses as indicated on the light string plug
and power cord plug.
3. Please check for loose, broken or missing light bulbs and replace as needed.
ASSEMBLY INSTRUCTIONS
1. Remove all ornaments and decorations. For pre-lit trees, first unplug cord from the wall outlet and
then disconnect light extension cord between each section of the tree.
2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to
remove from section below.
3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and
rotate the upper pole in both directions. Lift up the upper pole again.
4. Continue by gently lifting straight up each section(s) from the section below and fold all tips toward
the pole until the bottom section is removed from the tree stand.
5. Carefully place all tree sections into shipping box and tape it shut.
6. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to
excessive heat or humidity may damage your tree.
MADE IN CHINA
1
ASSEMBLY INSTRUCTIONS