Polygroup TGC0M3P07C00 User manual

Christmas Tree
Model: TGC0M3P07C00
Sku # 619 378
Package Contents
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b.This product is for indoor use only.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or
nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
h.This is an electric product and not a toy! To avoid risk of
fire, burns, personal injury and electric shock it should not
be played with orplaced where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire,
or light string.
k. Do not close doors or windows on the product or
extensions cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material
that is not a part of the product when in use.
m.Read and follow all instructions that are on the product or
provided with the product.
n. SAVE THESE INSTRUCTIONS
Pre-Assembly
When using electrical products, basic precautions should
always be followed, including the following:
Step 3.To close the stand, remove the eyebolts, press the
metal button and fold the legs together.
Step 1.Remove the protective cap from the tree bottom (E)
and insert the pole into the tree stand (F).
Step 2.Continue by inserting the upper tree section(s) to the
lower section(s) until inserting the tree top.
Assembling the tree
Part Description Quantity
E Tree bottom, tag 1 1
A Tree top, tag 5 1
B Tree center, tag 4 1
C Tree center, tag 3 1
D Tree center, tag 2 1
F Tree stand 1
Assembling the tree stand
Assembly
Step 1.Pull apart the legs of the stand so that they are
snapped into an x-shape, place the tree stand on a
level surface.
Step 2.When inserting the bottom section of the tree into
the assembled stand, insert and turn the eyebolts
into the stand and tighten until the tree pole is firmly
secured.
Section 5
Section 4
Section 3
Section 2
Section 1
Insert Yellow Label
Plugs Into Yellow
Labeled Extension Cord
Insert Blue Label
Plugs Into Blue
Labeled Extension Cord
S100
S100
S100
S100
S100
S100
S100
S50
Insert Red Label
Plugs Into Red
Labeled Extension Cord
S100
S100
Foot Pedal
on/off Switch
Extension Cord to Wall Outlet
Electrical Rating for the tree: 2.72A 120V 60Hz
S100
S100
S100
S100
S100
S100
S100
Extension Cord to Wall Outlet
Electrical Rating for the tree: 3.40A 120V 60Hz
Insert
Green Label
Plug Into Wall
Outlet
S100
S50
Click
Eye Bolt
Eye Bolt

Christmas Tree
Model: TGC0M3P07C00
Sku # 619 378
Operation
Turning on the tree
Maintenance
Care and Cleaning
Troubleshooting
Spare parts
Repairing Loose Hinges
Problem Solution
The tree does
not light
Ensure that all tree sections are plugged
into each other and that the tree is
plugged into the wall. If your tree came
with a foot pedal, step on the
On/Off button.
Check for blown fuses at the power cord
plug. Replace as needed with the
replacement fuses provided.
Check for loose, broken, or missing bulbs
and replace as needed with the
replacement bulbs provided
Step 3.Shape the branches to your preference by working
from the bottom to the top. When adjusting
branches, ensure that all wires are free of branch
hinges.
Step 4.Connect the plug(s) securely to the extension cord(s)
as per the color labels indicated in attached photo
and insert the green label extension cord plug into
the wall outlet.
Step 5.When finished shaping the branches, slightly
upsweep all branch tips for a uniform look.
NOTE: If some bulbs do not light or flicker, search for any
loose plugs and/or broken, loose, or missing bulbs. Replace
bulbs promptly with the replacement bulbs provided in
order to maintain the performance and life expectancy of
your tree.
Step 1.Connect the light strings of the tree together and
plug the power cord into a wall outlet.
Step 2.If the tree comes with a foot pedal, step on the
On/Off button.
This tree package includes hinge pins, washers, bulbs and
fuses for any replacement or repair that you need to
perform on your tree. If extra parts are needed, contact the
Customer Service Team at 1-877-527-0313 between the
hours of 8 am and 5 pm EST, Monday through Friday.
Step 1.Remove all ornaments and decorations.
Step 2.Unplug the cord from the wall and then unplug each
section of the tree.
Step 3.Gently lift the tree top straight up to remove from the
center sections and fold all branches towards the
pole.
Step 4.Repeat this step for the bottom tree section.
Step 5.Carefully place all tree sections into a shipping box
and tape it shut.
Step 6.Store your tree in a cool, dry place away from sunlight.
Step 1.Place the branch into the slot of the bracket.
Step 2.Insert a new hinge pin through the holes of the
bracket and secure with a washer.