PondXpert Triple Action Evolve 4500 Setup guide

PondXpert Triple Action
Evolve 4500
How to set up your All In One

Step One
The unit is simplistic in design and easy to maintain.
The removable
fountain
attachment
screws in to the
main base as
shown.
UVC viewing
area.

Fitments
Below are the remaining fitments for the Triple Action Evolve.
Fountain
head
attachments
T’ Piece fitment
Hostail for
T’ Piece
diversion
Hostail
diverter

Maintenance
The Triple Action Evolve is shown below with all attachments
removed. The blue clips shown to the side allow the unit to be
opened for maintenance.
The unit should be
checked at least every
6 months, the bulb will
need to be replaced
and the filter sponge
rinsed to ensure
productivity.

Maintenance
Continued…
The TripleAction Evolve is shown once the
clips have been removed, this allows
access to the interior of the unit.
Filter
Foam
UVC
viewing
UVC bulb
housing
Water flow
from, fountain
fitment internal
view

Fountain Heads
The fountain heads are
interchangeable to
produce different water
sprays.
If you choose to change
the original attachment
you will firstly need to
turn this fitment (1)
anti-clockwise.
The chosen fitment has a
push and screw fitment
as shown (2).
Due to this being a new
product the fitment may
be stiff to begin with; do
not worry this is normal.
(1)
(2)