Populife Smart Gateway User manual

Populife
Smart Gateway
User Guide
populife.co

1
Components Overview
Populife Smart Gateway x 1
Power cord x 1

2
Connecting & Configuring
Note: By default, you have added the smart locks in Populife app
(including Deadbolt, Keybox, Mortise, etc.)
1. Start the app and tap the "General" icon.
Lock
Me
Bluetooth keys
Settings
General
Passwords
Lock
Lock name

3
Connecting & Configuring
2. In the General menu, tap "Gateway".
Lock
Me
General
General
Lock group
Gateway
Notification
Help center
About

4
Connecting & Configuring
3. In the “Gateway” menu, tap " " icon at the top-right corner of
the screen.
Gateway
No data

Connecting & Configuring
4. Power up the Gateway.
When the power is turned on, the indicator light of the Gateway
flashes alternately in red and blue.
5
Gateway
Reconnect the Power
Click next when the light flash alternately
5. Then click the "Next" button.
Next

6
Connecting & Configuring
6. In the “Choose Gateway” menu, the app will automatically
search for the nearby Gateway, and then click to enter the next
step to configure WiFi.
Choose Gateway
Gateway_edf7dd
-36
(if the search time-out occurs, the gateway indicator will flash
alternately and the status will change. Please turn on the power
again after power failure. It can be added by app within 60
seconds. Please connect as soon as possible after the search.)

7
Connecting & Configuring
7. In the “Configure network” menu, enter the WiFi name, WiFi
password, gateway name according to the WiFi of your phone
connection (can keep the default), then click "OK" button to start
configuring the gateway. After the configuration is successful,
it will jump to the gateway list page.
Note: The gateway only supports 2.4G WiFi.
Configure network
Wifi Name
WiFi Password
Gateway Name
OK

8
Connecting & Configuring
The list of gateways shows the gateways added successfully.
Note: After the configuration is successful, the gateway will
automatically find and connect the nearby locks already added to
the current account, then the number of locks will be updated.
This process will take about 1-2 minutes according to your WIFI network.
Gateway
Gateway_edf7dd
Online
1
Whether the Smart Gateway is online
Number of locks

9
How to use
In the page of gateway list, select a gateway to enter the
management page where the connected locks are listed.
Then you can select a lock to enter the lock management page,
where you can remotely read the lock time, calibrate the lock
time and unlock it remotely.
Gateway_edf7dd
Lock(s) connected to this Gateway
Living room lock
Signa...edium

10
How to use
In the lock page, there is a shortcut button of “Remote unlocking”
under the battery icon. You can click it to unlock remotely.
Lock
Me
Bluetooth keys
Settings
General
Passwords
Lock
Lock name
Click here to
unlock remotely

11
How to use
If the shortcut button does not appear, please turn on the function
of “Remote unlocking” by following the below steps:
Lock page in app > Lock settings > Unlock remotely > Turn on
You can turn off the function of “Remote unlocking” as well.
Note: Make sure your phone is near the lock when switching the status.
Unlock remotely
This Feature allows you to Unlock the Smart Lock
Remotely via a Gateway. This Feature can ONLY be Turned
ON or OFF via Bluetooth
Current Mode: Off
Turn On
Current status is off
Click to switch on

12
How to use
In the lock page, there is a shortcut button of “Remote unlocking”
under the battery icon. You can click it to unlock remotely.
Lock
Me
Bluetooth keys
Settings
General
Passwords
Lock
Lock name
Click here to
unlock remotely
If you have any questions, please do not
hesitate to contact us via this button.

13
How to use
The app will prompt to remind you when the lock is successfully
unlocked remotely in some seconds.
Lock
Me
Bluetooth keys
Settings
General
Passwords
Lock
Lock name
Operation successfully

www.populife.co
Instagram
Facebook
E-mail
Phone
@populifelock
www.facebook.com/populife
[email protected]o
[phone] (7am - 10pm GMT+8 available)
More questions?
Please contact us.