PORODO PD-FMT36W-BK User manual

Dual USB-C & USB-A
MODEL: PD-FMT36W-BK
Quick-Charge FM
Car Charger

Features:
1.Supports Bluetooth and FM audio transmission
2. Supports QC3.0, QC2.0, PD, Huawei FCP, S
amsung AFC, BC1.2, Apple 2.4A, etc charging protocol.
3. Supports WMA, MP3, WAV, APE, FLAC music formats
4. Supports Bluetooth phone, voice, music, navigation
5. Support output over voltage protection, short
circuit protection, over current protection, over t
emperature protection
6. Support BASS acoustics
7. Automatic connect
8. Support U disk to play music
Specifications:
1. Bluetooth version: 5.3
2. FM frequency: 87.5MHz-108.0MHz
3. Bluetooth effective distance: 10 meters
4. QC3.0 port output：5V/3A、9V/2A、12V/1.5A
5. PD port output：5V/3A、9V/3A、12V/2.5A
PPS:3.3V-11V/3A
6. Input Voltage：12V-24V
7. U disk capacity：max 32 GB

Product Diagram:
1. Insert the product into the cigarette lighter of
the car after vehicle start.
Operating instructions:
LED Display
QC.3.0 fast
charging port
U-disk port
PD fast
charging port
Bass button
Mic
Light button
Multi-function button

2. After insertion, the device will automatically start
up and display HI -- current voltage -- BT frequency
flashing alternately.
3. Turn on the car radio and tune to a blank FM channel
4. Tune the device to the same channel as the car radio.
5. Open the Bluetooth of your phone ,search for
the "BC91" , and click connect.
6. After the connection is successful,then you can
play music, navigation or make/answer calls.
BC91

clockwise rotation“ ”button to increase volume；
counterclockwise rotation“ ”button to decrease
volume，when the maximum volume will have
a "drip, drip" prompt tone
Volume Adjustment:
1. Pause/Play—click“ ”button
2. Last song--counterclockwise rotation“ ”
button once
3. Next song--clockwise rotation “ ”button once
Music Control:
Long press” “button，frequency is flashing，
clockwise rotation” “button to increase frequency，
counterclockwise rotation” “button to decrease
frequency.
FM Frequency Regulation:

Click“BOSS”button，turn on/off bass function
One-touch Bass:
When the battery voltage is lower than 11V, the
voltage flashes alarm
Low Voltage Warning Function:
Switch between U disk/Bluetooth mode：double
click“ ”button.
U disk/Bluetooth Switch:
1. Answer a call：click“ ”button
2. Hang up a call：click“ ”button
3. Reject a call：long press“ ”button
4.Redial calls：double click“ ”button
Dial/Answer Call:
Click“ ”button，turn on/switch ambient
lighting in sequence. long press “ ” to enter
breathing light mode
Ambient Light:

Troubleshooting:
Power is
not
responding
or not
displayed
· Check if the machine is in good
contact with the cigarette port, and the
cigarette holder is not seriously rusted.
· Unplug and re-try again.
· Check if the cigarette holder is
powered normally.
1. Do not turn the radio volume too high (usually 18 or
below) to avoid the increase of the sound back noise.
2. Although the transmission power of this product is
relatively strong, you’d better skip the frequency with
strong signal in local to get a better sound quality.
3. Do not use this product in a dusty and humid
environment with extremely high and low temperatures.
4. Do not drop the product to avoid surface damage
or breakdown.
5. Do not disassemble the product, if you have any
questions, please contact your dealer.
6. Due to continuous improvement and enhancement
of technology, changes in product performance and
functionality are subject to change without notice.
Warm Tips:

The audio
of car
can't
receive
sound
· Make sure that the product FM launch
has been turned on.
· Is the transmission frequency of the
product the same as the reception
frequency of car’s?
The
launching
effect is not
good, there
is noise
· Make sure that there is no strong
signal station at the frequency of the
current transmission. When using it,
adjust to the frequency of no radio
station to get better sound effect.
Can't play · Check if the USB device is connected
to the player or not, or you can try
another USB device.
· Please make sure that there is copy
of the file in the USB device that can
be supported by the product.
· Please make sure the volume is not
set to 0.
There is
noise but
no sound
· Whether the product player is in a
pause state?
· Is the volume adjusted to 0 or small?
1. User manual 2. Main device
Packaging accessories: