PORODO PD-FM36WCC-BK User manual

Dual Port Car Charger
FM Transmitter
MODEL: PD-FM36WCC-BK

Product:
1. bluetooth、FM audio transmission
2. Support QC 3.0 QC2.0、PD、Huawei FCP、
Samsung AFC、BC1.2、Apple 2.4A and other
charging protocols
3. Support WMA,MP3,WAV, APE, FLAC music formats
4. Support bluetooth hands-free、music、navigation
5. Support output over voltage protection, short circuit
protection, over current protection, over temperature
protection
6. Battery voltage real-time detection,low voltage
flashing alarm
7. Automatic connect
8.Support U-disk /TF card peripherals
9. EQ sound can be adjusted
10. Synchronized display of music lyrics
11. Support break-point memory
Product specifications:
1.Bluetooth version:5.0
2.FM frequency:87.5 Mhz-108.0 Mhz
3.Bluetooth effective distance:10m
4.QC3.0 port output:5V/3A、9V/2A、12V/1.5A

5.PD port output:5.5V/3A、9V/3A、12V/2.5A
PPS：3.3V-11V/3A
6.Music port:5V/2A
7.Input voltage:12V-24V
8.U-disk/TF card capacity :MAX 32GB
Product Diagram:
1. Insert the product into the cigarette lighter of the
car after vehicle start
Operation instructions:
PD3.0 fast charge port
QC3.0 fast charge port
U Disk port
Last song/Menu Next song/FM frequency
TF card slot
Multi-function button
Switch button
AUX input/output
EQ button
Power button
Display window

2.Turn the device switch to the ON position
3.Turn on the car FM radio,and choose the blank FM
channel
4.Adjust the product frequency same as your car radio
5.Open the Bluetooth of smart device and search for
the "BC85" and click connect

6.After the connection is successful, you can play
music,navigate or make/answer calls
Long press” ”button to enter FM mode，the display
frequency flashing,rotate“ ”to adjust frequency，
clockwise +、counterclockwise -;also can
press “ ”and” ”
FM frequency adjustment：
BC85
NO R
FM
1 2 . 2 v
8 7 .5 2 0
Lovely-One Voice
posed by: Finneas
iPhone13
NOR
FM
1 2 . 2 v
8 7 .5 2 0
van pidiendo mas
Todos mis sentidos
00:56
03:51
0001
0021
NOR
FM
1 2 . 2 v
8 7 .5 2 0
van pidiendo mas
Todos mis sentidos
00:56
03:51
0001
0021

Rotate “ ” button clockwise volume +,
counterclockwise volume-
Volume control:
1. Pause/play—click “ ” button
2. Last song—click “ ” button
3. Next song—click “ ” button
Music control:
Click” ”button to enter the tuning interface，
press “ ”and ”button to choose Bass/Treble ,
rotate the ” to make adjustment；click“ ”button
to save and exit the interface.
EQ Adjust：
button to adjust frequency,wait for 5 seconds to
automatic confirm and save the current frequency,or
click“ ”button to confirm.

1. Answer a call: click“ ”
2. Hang up a call: click“ ”
3. Reject a call: long press“ ”
4. Call back: double click“ ”
Dial/answer call:
U-Disk/TF Card/AUX IN, post insertion priority play
When the machine is connected to bluetooth/U disk/T
card/AUX IN, click button to switch between
these mode
Play source switch：
Plug in the audio cable to enter the AUX MODE
AUX mode：
Bass Treble
5
0
-5
5
0
-5

1. Audio output mode
Enter this mode, need click” ”button to switch ( TF
card/U disk/bluetooth play)
2. Audio input mode
Enter this mode, play music directly after connect
device（If you switch to TF card/U disk/bluetooth
play at the same time, there will be sound mixing.）
Active audio
Car stereo
NO R
FM
1 2 . 2 v
8 7 .5 3 1
AUX MODE
Phone
Tablet
Notebook
N OR
FM
1 2 . 2 v
8 7 . 5 3 1
AUX MODE

When playing music with TF card or U disk，can long
press “ ” button to switch between single loop, all
loop, sequence loop, Random Mode.
Only support U disk/TF card play mode
Cycle mode selection:
Long press “ ” to enter Menu
Menu Selection:
After bluetooth connection, long press the ” ”button
for 2 seconds to activate SIRI/voice assistant, short
press to exit voice assistant.
Voice assistant wake up：
Language option、U disk directory、TF card directory、
Restore factory set（Only U disk directory/TF card
directory can choose this option）
Click “ ” to exit menu
Menu
Language
U-diskDir
Restore factory set

1. Do not turn the radio volume too high (usually 18 or
below) to avoid the increase of the sound back noise.
2. Although the transmission power of this product is
relatively strong, you’d better skip the frequency with
strong signal in local to get a better sound quality
3.Do not use this product in a dusty and humid
environment with extremely high and low temperatures.
4. Do not drop the product to avoid surface damage
or breakdown.
5. Do not disassemble the product, if you have any
questions, please contact your dealer.
6. Due to continuous improvement and enhancement
of technology, changes in product performance and
functionality are subject to change without notice.
Warm tips:
When the battery voltage is less than 11V, the display
flashes. If it continues to flash for 10 minutes without
any operation, the bluetooth will enter the low-power
mode automatically.（This function is to protect the
car battery. Some cars after turned off and locked, the
cigarette lighter is not powered off）
Low Power Mode :

Troubleshooting:
Power is
not
responding
or not
displayed
1. Check if the machine is in good
contact with the cigarette port, and the
cigarette holder is not seriously rusted.
2. Unplug and re-try again
3. Check if the cigarette holder is
powered normally
Can't play 1. Check if the USB device is
connected to the player or not, or you
can try another USB device.
2. Please make sure that there is copy
of the file in the USB device that can be
supported by the product.
3. Please make sure the volume is
not set to 0
There is
noise but
no sound
1. Whether the product player is in a
pause state
2. Is the volume adjusted to 0 or small?
The audio
of car can't
receive
sound
1. Make sure that the product FM
launch has been turned on.
2. Is the transmission frequency of the
product the same as the reception
frequency of car’s?

The
launching
effect is not
good, there
is noise
1. Make sure that there is no strong
signal station at the frequency of the
current transmission. When using it,
adjust to the frequency of no radio
station to get better sound effect.．
1. Main device 2. Manual
Packaging accessories
Made in China
www.porodo.net /myporodo/porodo