Portwell PIMB-09082 User manual

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
1
Color of board image is for representation purpose only.
PIMB-09082
Portwell India
PIMB-09082 (ATX Size motherboard)
Version 1.1
Published date: July 2016

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
2
Table of Contents
1. INTRODUCTION ............................................................................................................................................................................ 3
2. SPECIFICATION ............................................................................................................................................................................. 4
2.1. SUPPORTED OPERATING SYSTEMS .............................................................................................................................................................. 5
3. MECHANICAL DIMENSION & HARDWARE CONFIGURATION.......................................................................................................... 6
...................................................................................................................................................................................................................... 6
3.1. MECHANICAL DIAGRAM ........................................................................................................................................................................... 6
3.2. HARDWARE CONFIGURATION .................................................................................................................................................................... 7
4. JUMPERS & CONNECTORS ............................................................................................................................................................ 9
4.1. JUMPERS ............................................................................................................................................................................................... 9
4.2. REAR PANEL CONNECTORS...................................................................................................................................................................... 14
4.3. INTERNAL CONNECTORS ......................................................................................................................................................................... 15
5. BIOS ........................................................................................................................................................................................... 22
5.1. BIOS SETUP PROGRAM .......................................................................................................................................................................... 22
5.2. MENU BAR........................................................................................................................................................................................... 23
5.3. MAIN MENU ........................................................................................................................................................................................ 24
5.4. ADVANCED MENU................................................................................................................................................................................. 24
5.5. HARDWARE MONITOR MENU .................................................................................................................................................................. 36
5.6. SECURITY MENU .................................................................................................................................................................................... 37
5.7. BOOT MENU ........................................................................................................................................................................................ 39
5.8. EXIT MENU .......................................................................................................................................................................................... 41

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
3
Trademarks
Specifications and Information contained in this documentation are furnished for information use only and are subject to change at any time without notice and
should not be construed as a commitment by manufacturer.
Product names, logos, brands, and other trademarks featured or referred to within this User ‘s guide or the Portwell website, are the property of their
respective trademark holders. These trademark holders are not affiliated with Portwell, our products, or our website.
Technical Support
Portwell technicians and engineers are committed to providing the best possible technical support for our customers so that our products can be easily used
and implemented.
We request that you first visit our website at http://www.portwell.in for the latest documentation, utilities, and drivers, which have been made available to assist
you. If you still require assistance after visiting our website, then contact our technical support department by email at [email protected] for further
assistance. Thank you!
1. Introduction
PIMB-09082 is based on Intel® H110 chipset which supports Core i3/i5/i7 6th and 7th gen processor. PIMB-09082 adopts Two DDR4 U-DIMMs sockets and
supports up to 32GB Memory.
Desktop solution is still popular in the market of DVR and Factory Automation which can fulfill most of these applications; therefore, with high performance
and high-end specifications, PIMB-09082 is generation Skylake / Kabylake -S chip architecture on ATX product line.

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
4
2. Specification
CPU
Intel
®
socket 1151 for 7
th
/ 6
th
Gen Intel
®
Core™i7/ i5/ i3, Pentium
®
, and Celeron
®
Processors
Supports Intel
®
14nm CPU Supports up to 65W
Chipset
Intel
®
H110 Chipset
Memory
2 x U-DIMM, max.32GB, DDR4 2400/2133 MHz SDRAM
Graphics
Integrated graphics processor - Intel
®
HD Graphics support multi-VGA output support: VGA/HDMI ports
- Supports VGA output with a maximum resolution of 1920 x
1200 @ 60Hz
- Supports HDMI output with a maximum resolution of 4096 x 2160 @ 30 Hz (co-lay with optional DisplayPort 4096 x 2304 @ 60Hz)
Expansion slots
1 x PCIe 3.0/2.0 x16 slot (x16 mode)
1 x PCIe 2.0 x16 slot (x4 mode, x4 pin) 5 x PCI slots
1 x M.2 Socket 3 with M key, type 2242/2260/2280 (SATA mode)
Storage
3 x SATA Gen 3.0, up to 6.0 Gb/s ports
LAN
Dual Intel
®
Lan: 1 x Intel
®
i219V, 1 x Intel
®
I211AT
Audio
Realtek ALC887-VD2 / ALC 897 High-Definition Audio*
Line-Out, Line-In, Mic in
* The audio codec may vary between motherboards, please consult your sales window for the motherboards’ exact codec type.
Rear I/O ports
1 x VGA port
1 x HDMI port (Colay with optional DisplayPort) 4 x USB 3.2 Gen 1 ports
2 x LAN (RJ45) ports
2 x COM ports (RS232/422/485) 1 x P/S2 keyboard port
1 x P/S2 mouse port
3 x Audio jacks
Internal I/O
connectors
6 x COM headers (RS232)
2 x USB 2.0 headers support additional 4 USB 2.0 ports
2 x USB 2.0 connectors
1 x CPU Fan header (PWM mode)
1 x Chassis Fan header (PWM mode) 1 x Chassis intrusion header
1 x Front Panel Audio header (AAFP) 1 x System Panel header
1 x Clear CMOS header
1 x Speaker header
1 x LPC Debug header 1 x I2C header
1 x LPT header
1 x GPIO header (8-bit)
1 x AT/ATX mode selection jumper 1 x 24-pin ATX power connector
1 x 4-pin ATX power connector

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
5
GPIO
1 x 8-bit GPIO header
Manageability
WfM 2.0, DMI 2.0, WOL by PME
Watch dog timer
Yes
Power requirement
AT/ATX mode
Operation
Temperature
0~60°C
Non-Operation
Temperature
-40~85°C
Relative Humidity
0%~85%
OS support
Windows® 7 (32/64bit ) Windows® 10 (64bit ) Windows® 10 IoT Enterprise Ubuntu, RedHat Enterprise
Fedora Workstation OpenSUSE
Form Factor
ATX Form Factor, 12”x 9.6” (30.5cm x 24.4cm)
2.1. Supported Operating Systems
Windows® 7 (32/64bit)
Windows® 10 (64bit)
Windows® 10 IoT Enterprise
Ubuntu,
RedHat Enterprise
Fedora Workstation OpenSUSE

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
6
3.Mechanical Dimension & Hardware Configuration
3.1. Mechanical Diagram
NOTE: The audio codec may vary between motherboards,
please consultyour sales window for the motherboard’s
exact codec type.

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
7
3.2. Hardware Configuration
Connectors/Jumpers/Slots
1.
COM RING/+5V/+12V selection (COM1/2_SEL)
2.
ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
3.
CPU and chassis fan headers (4-pin CPU_FAN, 4-pin CHA_FAN)
4.
Intel
®
LGA1151 CPU socket
5.
DDR4 U-DIMM slots
6.
COM Port headers (10-1 pin COM3 - COM8)
7.
USB 2.0 headers / connectors (10-1pin USB56, USB78 / USB9, USB10)
8.
SATA 6.0 Gb/s ports (7-pin SATA6G_1-3)
9.
TPM header (14-1 pin TPM)
10.
M.2 slot (SOCKET 3)
11.
System Panel header (10-1 pin F_PANEL)
12.
Speaker header (4-1 pin SPEAKER)
13.
Chassis Intrusion header (4-1 pin CHASSIS)
14.
Clear RTC RAM (2-pin CLRTC)
15.
I
2
C header (6-1 pin I
2
C)
16.
General purpose input/output header (GPIO_CON)
17.
LPC Debug header (10-1 LPC_DEBUG)
18.
LPT header (26-1 pin LPT)
19.
Front Panel Audio header (10-1 pin AAFP)
20.
AT/ATX mode selection (3-pin AT_ATX_SEL)
21.
WDT Enbale jumper (2-pin WDT_EN)
3.2.1 Environmental Specifications
oStorage Temperature: -20~80°C
oOperation Temperature: 0~60°C

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
8
3.2.2 System memory
This motherboard comes with two Double Data Rate 4 (DDR4) Dual Inline Memory Module (DIMM) sockets. The figure below illustrates the location
of the DDR4 DIMM sockets:
Channel
Sockets
Channel A
U-DIMM_A1*
Channel B
U-DIMM_B1*

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
9
4. Jumpers & Connectors
4.1. Jumpers
4.1.1.Clear RTC RAM (2-pin CLRTC)
This header allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords.
To erase the RTC RAM
•Turn OFF the computer and unplug the power cord.
•Use a metal object such as a screwdriver to short the two pins.
•Plug the power cord and turn ON the computer.
•Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.
•If the steps above do not help, remove the onboard battery, and move the jumper again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the
battery.
Connector type
Header 1x2p, 2.54mm pitch, S/T

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
10
4.1.2. COM Ring/+5V/+12V selection jumper (6-pin COM1/2_SEL)
A
B
COM2_SEL
COM1_SEL
Pins
Setting
1-2
+12V
3-4
+5V
5-6
Ring (Default)
A
B

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
11
4.1.3. Chassis intrusion header (4-1 pin_CHASSIS)
This header is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The
chassis intrusion sensor or switch sends a low-level signal to this connector when a chassis component is installed. The signal is then generated as a chassis
intrusion event.
Connector type
Header 4p, K2, 2.54mm pitch

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
12
4.1.4. AT/ATX mode selection (3-pin AT_ATX_SEL)
Pins
Setting
1-2 (Default)
ATX Mode
2-3
AT Mode
Connector type
Header 1x3p, 2.54mm pitch

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
13
4.1.5. WDT Enable jumper (2-pin WDT_EN)
A watchdog timer is an electronic timer that is used to detect and recover from computer malfunctions. The HW WDT (watchdog timer) Enable jumper allows the HW
watchdog resets the system automatically even when the system crashes.
.
Connector type
Header 1x2p, 2.54mm pitch, S/T

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
14
4.2. Rear Panel Connectors
Audio 2, 4, 5.1 or 7.1-channel configuration
Note: Use a chassis with HD audio module in the front panel to support a 7.1-channel audio output
PS/2
This Port is for PS/2 Mouse & keyboards
COM 2 & COM
1
RS232/RS422/RS485 ports connect modems, or other devices that conform serial specification
VGA
This 15-Pin port for VGA monitor or other VGA compatible devices
LAN (RJ45)
These ports allow gigabit connection to Local Area Network through network hub
LAN LEDs
Activity/ Link LED: Off=no link, Orange=Linked, orange blink=data activity, orange blink then
steady=Ready to wake up from S3 mode
Speed LED: Off=10Mbps connection, Orange=100Mbps connection, Green=1Gbps connection
Line In
This port connects to the tape CD/DVD or other audio sources
Line Out
This port connects headphone or speaker. In the 4.1 & 5.1 channels config, the function of this port
becomes front speaker out
Mic
This connects to microphone
USB 3.2 Gen 1
These 9-pin USB up to 5Gbps ports are for USB 3.2 gen 1 devices
HDMI
This port is for a High-Definition Multimedia Interface (HDMITM) connector, and is HDCP compliant
allowing playback of HD DVD, Blu-ray, and other protected content
Port
Headset-2 Channel
4-Channel
5.1-Channel
7.1 Channel
Light Blue (Rear panel)
Line In
Rear Speaker Out
Rear Speaker out
Rear Speaker Out
Lime (Rear panel)
Line Out
Front Speaker Out
Front Speaker Out
Front Speaker Out
Pink (Rear panel)
Mic In
Mic-In
Bass/Center
Bass/Center
Lime (Front panel)
-
Side Speaker Out

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
15
4.3. Internal Connectors
4.3.1.ATX Power Connectors (24-pin EATXPWR, 4-pin ATX12V) :
Correctly orient the ATX power supply plugs into these connectors and push down
firmly until the connectors completely fit.
4.3.2.CPU and chassis fan headers (4-pin CPU_FAN, 4-pin CHA_FAN):
Connect the fan cables to the fan headers on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the header.
Note: Do not forget to connect the fan cables to the fan headers.
Insufficient air flow inside the system may damage the motherboard components.
These are not jumpers! Do not place jumper caps on the fan headers!
B
EATXPWR
A
ATX 12V
A
B
CPU FAN
Chassis Fan
Connector Type
WAFER HD 4p, 2.54mm pitch, S/T
A
A
A
B
B

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
16
These headers are for serial (COM) ports. Connect the serial port
cables to these headers, then install the module to a slot opening at
the back of the system chassis
These connectors are for USB 2.0 ports. Connect the USB cables
to the connectors. The USB connector complies with USB 2.0
specification that supports up to 480 Mbps connection speed.
4.3.3.COM Port headers (10-pin COM3 - COM8)
4.3.4.USB 2.0 headers/connectors (10-pin USB56, USB78 / USB9, USB10)
A
COM 5
B
COM 6
C
COM 7
D
COM 8
E
COM 3
F
COM 4
Connector Type
Header 2x5p, K10, 2.54mm pitch
C
USB 7 8
D
USB 5 6
A
USB 9
B
USB 10
Connector Type
Header 2x5p, K9, 2.54mm pitch
A
C
D
E
F
B
A
B
B
C
B
D
B

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
17
These ports connect to SATA 6.0 Gb/s hard disk drives or an optical drive via SATA
6.0 Gb/s signal cables.
This header supports a Trusted Platform Module (TPM) system with a Serial
Peripheral Interface (SPI), allowing you to securely store keys, digital certificates,
passwords, and data. A TPM system also enhances network security, protects
digital identities, and ensures platform integrity.
4.3.5.SATA 6.0Gb/s ports (7-pin SATA6G_1/2/3)
4.3.6.TPM Header (14-1 pin TPM)
A
SATA6G_1
B
SATA6G_2
C
SATA6G_3
Connector Type
Header 2x7p, K14, 2.0mm pitch
A
B
B
B
C
B

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
18
This slot allows you to install an M.2 SSD module.
This slot supports M Key and 2242/2260/2280 storage devices
4.3.7.M.2 Slot (Socket 3)
4.3.8.Front panel system panel connector (10-1 pin F_PANEL)
Connector Type
Header 2x5p, K10, 2.54mm pitch

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
19
The I2C (Inter-Integrated Circuit) header allows you to connect an I2C compatible
IoT security module
The 4-pin header is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
4.3.9. Speaker header (4-pin SPEAKER)
4.3.10. I2C Header
Connector Type
HEADER 1x4p, 2.54mm pitch, S/T
Connector Type
Header 2x3p, K6, 2.0mm pitch

PIMB-09082
User Manual
PIMB-09082 User’s Manual
www.portwell.in
20
This header is for a general-purpose input/output module which allows you to
customize the digital signal input/output.
This header allows connection to a LPC Debug card.
4.3.11. General purpose input/output header (GPIO_CON)
4.3.12. LPC Debug header
Connector Type
WAFER HD 2x5p, 2.0mm pitch, S/T
Connector Type
HEADER 2x5p, K10, 2.0mm pitch