PosDelta T90 User manual

IMPRESORA TERMICA T90
T90 thermal printer is a new tiny-printer.It is characterized by small size, fast printing
speed, low noise, advanced-qualified printing, and simple operation without ribbon, which
help you avoid the trouble of routing maintenance
MJ-T58 thermal printer is widely used in many places , especially in supermarket, chain
stores, which can also be applied to dining ,entertainment, self-check, and taking number
when queuing up.
Security
This section illustrates some information to ensure tsafe and effective use of the
products ..Please read this section carefully

Warning:
1.If there is smoking , abnormal smell or unusual noises,please immediately turn off the
machine and pull the plug, and contact the service center .
2.Do not attempt to repair the machine. Incorrect maintenance will cause some danger
3.Do not disassemble or adjust the mechine. Wrong action will cause the damage to the
machine.
4..Use the standard power supply according to the . Nonstandard power supply may
cause damage or fire to the unit . .
5.Prevent any objects come inside the casing to avoid the fire.
6.If there is water or other liquids into the machine, please immediately unplug the power,
and contact the service center to ask for help .
Note:
1. Do place the machine placed in a stable and strong level surface,or the machine may
be or damaged as falling down
2.Do not use the machine in the wet or dusty environment. Excessive humidity and dust
may cause damage or fire to the machine
3.Do not place any heavy objects on the machine. Do not stand on the machine or lean
against the machine, or it may cause damage to the machine and injury to user .
4. Do not pull the paper out of the machine when the printer cover closed. . Otherwise,
there may cause faulty.
5. With a view to security, unplug the power cord when you do not need to use the
machine for a long time . Make sure the power cord is unplugged out when you move the
machine.
6.Do not use the flammable gas spray used in and around the products. Otherwise,
residual gas may cause fire.
7 The temperature of the thermal printer head will increase during and after use ,please
don't touch it to avoid buring your hand.Clean the thermal printer head when it cool off.
8.Notice the printer cutter in case that hurt you .

Printer Introduction
●Appearance
●Control Panel

●Adaptor
Notice:
1.Use the standard power outlet
2.Rotate the power adaptor and make the side with the label down. 3.
Stay away from the large motor equipment and use them together .
4. Do connect the direct cable with the adaptor then connect the power cabe to the outlet
5.Do unplug the power cable from the outlet, then disconnect the DC cable
6.Use a dry cloth or slightly damp (wring dry) cloth to clean the adaptor . Do not power adaptor
and wall outlet when connecting to cleaning.
Printer Installation
●Open the lid of printer

●Close the lid of printer
●Feeding paper
1.Open the lid of the printer
2.Take out the paper scroll.
3..Feed the paper into the printer according to the following picture
4.Please pull out some paper according to the picture then close the lid.

5.Tear down the paper pulled out
●Printer start self-detection and printing
After installation and before power on ,Long press the paper feeding paper button and
turn on the printer power ,then stop pressing the feeding paper button and finish the
printer self-detection .
Printer Clearance
Open the printer and use the ethyl alcohol to clean the printer .

Note: The temperature of the thermal printer head will increase during and after use
,please don't touch it to avoid buring your hand.Clean the thermal printer head when it
cool off.
Specification
Performance Characteristics
Printing Method Thermal
Printing Speed 70mm/sec.
Paper Width 57.5 ±0.5mm
Low Paper Detection
p
hotoelectricity
Printing Paper
Paper Type Thermal paper ：TF50KS-E or AF50KS-E
Paper Spec. Paper with 57.5 ±0.5mm OD MAX：φ80mm
ID MIN：φ10mm Paper thickness：53～60g/m2
Printing Character
ANK Character 12×24 english，1.5（W）×3.00（H），32CH/Row
Interface
Communication Port Parallel interface (IEEE1284)，(RS-232)，USB
Cashdrawer Interface DC8.3V，1A，6cabel RJ11outlet
Power and Use
Environment
Power DC12V，3A
Temperature 5～40℃(working) －20～60℃(storage)
Humidity 10～80％(working) 10～90％(storage)
Physical Character
Dimension （L）204mm×（W）116mm×（H）137mm
Weight apporximate1kg（without paper roller)