Power Pong Delta User manual

Power Pong Delta
Table Tennis Robot
Customer support: [email protected] 714-280-6821
Developed by Csaba Lukács (LCS.Kft / Hungary)
Operation Manual
Πcertified!

- 2 -
Important: Please read instructions carefully prior to use!
FEATURES
• State of the art 3-wheel ball delivery technology provides all types of spin.
• Rigid sponge wheels with a special coating for longer durability.
• Lightweight and easily transportable. Weighs approximately 6 kg (13 lbs.).
• Random features include natural scattering of shots, random placement, or both!
• Programmed or random delivery of balls with different spin, speed, direction, and trajectory.
• Can generate no spin to extreme amount of spin combinations.
Most other designs on the market can’t do it.
• Start Exercise with serve, which inserts a natural pause before each repetition.
• 99 memory places, including 40 pre-programmed Exercises from Samson Dubina TTA.
• IFC (Individual Frequency Control) function for more natural timing of balls in a drill.
• Grouping drills together to play one after the other or randomly, creating a real time game experience.
• Alternate play and break periods (interval training) with the Cycle function.
Covered by a full 2-year Manufacturer’s, plus 1 year Power Pong Warranty and 5-year guarantee of parts and
service availability.
• Please read this Owner’s Manual carefully before using the machine.
• This machine may only be connected to 100 – 230 V current.
• The ball throw wheels rotate at high speed. Avoid touching the wheels during operation!
• Use this product only in enclosed and dry rooms.
Used properly, your Power Pong Delta will always be a great training partner.
Easy programing of a Power Pong 3001, 5000 and Delta control boxes.
Showing the set up and easy programing of a short side under spin serve to the
forehand, long under spin push to the backhand, topspin ball to the forehand and also to
the middle of the table, and another long under spin to the backhand for right handed
players
Easy setup and programing of the control box video
https://vimeo.com/manage/videos/256674618

- 3 -
Quick Start Guide
Verify'All'Parts'
First,'unpack'your'robot'and'all'parts'from'the'box'and'verify'that'everything'is'present.'If'a'part'is'missing,'
please'contact'us'immediately'(see$back$page$for$contact$info).$$
• Robot
• Balls (U.S. Only) • Carrying bag • Android tablet • 24 V Adopter • Remote control • Charging cable
• Velcro pieces • Spare rubber bands for side net • Tablet Holder Bracket • Hex wrenches
• Black tube for wheels adjustment • White strips to repair deflector plate
1. Place the robot on top of your table tennis table. Fold apart both sides of the net at the same
time.
2. Loosen the large Black Knob found on the rear of the Ball Tube. Rotate the head of the robot and
the support legs out into the position seen in the second photo.
3. Pull the head upwards until the 2nd silver ring on the tube is aligned with the top of the base unit
and then tighten the black knob to hold it in place. (Be careful so you don’t put a dent into the
tube when tightening the knob). The supporting legs are going under the table and the Omega
sticker is on the top.
4. Connect the cable coming from the head to the serial connector found on top of the Base unit and
place the robot on the table as seen on the 3rd photo.

- 4 -
5. Standing behind the robot, grip the top points of the net and fold the net down on both sides until
the net fully opens.
Please use the included longest Velcro strip to help secure the robot to the end of the
table. The Velcro strip may protect the robot from being knocked off the table.
Please note that the Power Pong robots are designed to fit onto 25 mm (1 in.) thick tops, but the supporting
legs are designed with heights adjusting screws, so it’s adjustable to fit tables with thinner than 25 mm tops.
Place the plastic Corner Brackets of the net around the corners of your table as seen in the Photo.
6. Pull a Side Net along the sideline of the table and pull its thick rubber band over the top of the
table’s net. Attach it to the clamp screw that holds the net onto the table.
NOTE: You may attach the two shortest Velcro strips to the corners of your table underneath the
Corner Brackets to help the brackets stay down and stabilize the entire net.
8. Plug your Power Supply into a power outlet and then into the power jack on the side of the Base
unit, and connect your control box to the base unit with the thin cable.
9. Adjustment Of Head Height
On most table tennis robots, the height of the head cannot be adjusted. In contrast, Power Pong
Robots offers 4 different heights to better simulate realistic play. It is quite easy to adjust the head
height. From behind the net, push the top of the net down to reach over it. Grab the ball tube with
one hand and loosen the large black knob with the other hand. You can then pull the tube up or push
it down to adjust head height. Lock it in place by tightening the Black Knob.
10. Orienting The Robot To The Centerline
After completing the setup place 60-100 Power Pong balls into the ball collection tray. Grab your
racket and prepare to return balls from your robot. Connect your Power Pong app and click on
drills. Type in test into search and click on Test Drill 1. Adjust the head of the robot if needed to
have the balls delivered close to the centerline.