PowerPac Cold Press PP3407 User manual

Model: PP3407
210719-24
SAFETY LOCK &
EASY OPERATION
MAKE PULP FREE JUICE
100% REFRESHING
Healthy Safe Clean

Drinking a glass of fresh juice from fruits and vegetables provides many health benefits
such as providing you with a natural source of vitamins and minerals, and ultimately, a
clearer complexion, detoxifying the body of toxins, relieving stress, and, improving the
overall health of the individual. Once the gastro-intestinal tract is clear of toxins, the
feeling of bloatedness will decrease, and so might your weight.
The PowerPac Slow Grind Juicer (also known as a cold press juicer) works by slowly
(hence the name) crushing (or masticating) the fruit or vegetable into juice and some
pulp. Because heat is not generated unlike in Fast Juicing, the taste of the juice is not
altered and it also retains more nutrients. A Slow Juicer is needed for producing juices
from starchy or leafy fruits and vegetables, such as soft soy beans, kale, wheat grass,
sprouts, broccoli, and also nuts, which an ordinary fruit juicer cannot. Thus, a slow
juicer produces a better quality juice. Also, it is a lot quieter so you can have your juice
without waking everyone in your home or neighbourhood.
Notes
Remove seeds from citrus fruits before juicing as they will make juice taste bitter.
Thick-skinned fruits such (orange, grapefruit, pineapple) should be peeled before
juicing; thin-skinned fruits and vegetable DO NOT need to be peeled.
Suitable fruits and vegetables include: apple, asparagus, beetroot, broccoli, carrots,
celery, cucumber, ginger, grapefruit, kale, mint leaves, orange, pineapple, spinach,
squash, sugar beet, tomato, wheatgrass and watermelon.
A little lemon will help reduce the bitter taste of vegetables, while a little honey will
sweeten the taste. You can add cinnamon or mint to spice up the taste of the juice.
It is advisable to drink fruit juice immediately (or store it in the refrigerator) after
extraction, as oxygen in air oxidises the juice quickly and nutrients present in the juice
will be lost.
1

RECIPES
Apples
Carrots
Lemon
Honey
1.
2.
3.
Cut apples & carrots into small pieces.
Put it into the juicer.
Put the juice into a cup, add a few
drops of honey & a few drops of lemon,
and stir.
Chill it in a refrigerator. Serve with a
slice of fresh lemon.
2 carrots
1 fresh ginger
½ cup of
unsweetened
yoghurt
1.
2.
3.
Cut 2 carrots & 1 fresh ginger into small
pieces. Put it into the juicer.
Put the juice into a cup, add yoghurt,
and stir.
Chill it in a refrigerator.
Serve with fragrant mint leaves.
1 orange
1 tomato
Sugar
Ice cubes
1.
2.
3.
1.
2.
3.
1.
2.
3.
Peel orange and cut into small pieces.
Slice tomato. Put them into the juicer.
Put the juice into a cup, add sugar,
and stir.
Add ice cubes.
1 pineapple
2 tablespoons
honey
Ice cubes
Cut pineapple into small pieces.
Put it into the juicer.
Put the juice into a cup,
add 2 tablespoons of honey, and stir.
Add ice cubes.
¼ squash
2 tablespoons
sugar
2 tablespoons
condensed milk
Peel squash and cut into small pieces.
Put it into the juicer.
Put the juice into a cup,
add 2 tablespoons of sugar,
2 tablespoons condensed milk, and stir.
Add ice cubes.
Apple & Carrot Juice
Carrot & Ginger Juice
Orange & Tomato Juice
Pineapple Juice
Squash Juice
2

PARTS & DESCRIPTION
Pusher
Feed Tube /
Bowl Cover
Auger
Bowl
Switch
Main Body
Pulp Collector
Juice Collector
Strainer
LIST OF COMPONENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
Pusher
Feed Tube / Bowl Cover
Auger
Strainer
Bowl
Pulp Collector
Juice Collector
Main Body
Switch
3

ATTENTION :
Read this booklet carefully it contains important instructions for a safe installation,
use and maintenance.
Important instructions to be kept for future reference.
The following basic precautions should always be followed when using electrical
appliances:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Read all instructions before using the appliance.
This appliance must be used only for the purpose it was expressly designed; any
use NOT complying with the instructions contained in the manual is considered
inappropriate and dangerous. DO NOT use this appliance as a chopper or a masher.
It DOES NOT grind meat, whip dairy, etc. The manufacturer is NOT responsible for
possible damages caused by the inappropriate and/or unreasonable use.
This appliance is NOT suitable to be used or stored near heat sources (open flame,
ovens, heaters, stoves, etc.) and/or in an explosive environment (in the presence of
flammable substances such as gas, vapour, mist or dust, in atmospheric conditions
when, after ignition, the combustion is spread in the air). Items containing these
substances should never be placed in the appliance, and never be used to clean the
appliance in order to avert the risk of fire or explosion.
The packing materials (plastic bags, expanded polystyrene, etc.) must be kept out
of the reach of children or disabled persons since they represent potential sources
of danger.
The installation/assembly of the appliance will be made in accordance with the
indications of the manufacturer. A wrong procedure may cause damages to persons,
animals or objects, for which the manufacturer cannot be considered responsible.
Before use, check the integrity of the appliance and Power Cable. DO NOT operate
the appliance when its housing is damaged. In case you are not sure, contact a
qualified person. If the Power Cable is damaged, it must be replaced by the
manufacturer or its service agent or a qualified technician in order to avoid a shock
hazard.
Before powering the appliance make sure the rating (voltage and frequency)
corresponding to the grid and the socket is suitable for the plug of the appliance,
and that the wall socket is properly grounded.
DO NOT power the appliance using multiple sockets. If possible, avoid the use of
adapters and/or extension cables; if their use is absolutely necessary, use only
materials in compliance with the current safety regulations and according to the
electrical parameters of the adapters.
The appliance must NOT be switched on using external timers and/or other remote
control appliances which are not specified in this manual.
Only use original components & accessories provided by the manufacturer. Any
non-original components & accessories NOT recommended by the manufacturer
may cause injuries to persons or damage to the appliance.
WARNINGS
4

11.If you are using the appliance for the first time, you should:
a.
b.
c.
d.
e.
f.
g.
h.
i.
Make sure to remove any label or protective sheet which may prevent its proper
functioning.
DO NOT
•
•
•
•
•
•
•
•
Wipe the exterior of the Main Body with a soft cloth moistened with water. Wash
the Pusher, Feed Tube / Bowl Cover, Auger, Strainer, Bowl, Pulp Collector & Juice
Collector with water & dishwashing liquid with a non-abrasive sponge.
DO NOT wash any component in the dishwasher. DO NOT use metal scouring
pads. Dry each component using a soft cloth.
Assemble the Bowl (with the Rubber Stopper firmly in place), Strainer, Auger,
Feed Tube / Bowl Cover to the Main Body. Attach the Pulp & Juice Collectors to
their respective Outlets. (see steps 3 – 8“How to Assemble”)
Place and use the appliance on a horizontal, stable and heat-resistant surface.
Ensure that the appliance is standing at an upright position before switching on
the appliance.
Move the appliance using the Handle, and NOT by the Power Cable.
Turn the Switch button on the appliance to‘OFF’, connect the Power Cable to the
electric mains and switch on. Turn the Switch button on the appliance to‘ON’,
feed pre-washed food items, absent of large pips or seeds and no larger than
4 cm, slowly into the appliance. There is no need to use the Pusher.
The Auger will automatically pull in the food, and begin juicing immediately.
Use the Pusher if food is stuck. If that does not dislodge the food, press the
Switch button to ‘REV’ for a few seconds; or switch off the appliance, unplug the
Power Cable, and disassemble the appliance by lifting the Pusher out, removing
the Bowl and the Feed Tube / Bowl Cover as one combined unit away from the
Main Body, and over a sink. Remove the Feed Tube / Bowl Cover and the Auger
(see step 2 “How to Clean and Maintain”). That should dislodge the food item.
Assemble the Auger, Feed Tube / Bowl Cover to the Main Body.
(see steps 3 – 6 “How to Assemble”)
If you need to stop for a while to prepare more food items or when juicing is
completed, turn the Switch button on the appliance‘OFF’, switch off the electric
mains and unplug the Power Cable. DO NOT run the appliance without any food
item inside the Feed Tube / Bowl Cover as this could overheat the motor.
You may wish to rinse out the remaining residue from your last juicing. Add water
into the Feed Tube / Bowl Cover until water entering the Juice Collector run clear.
Switch off the appliance and unplug the Power Cable from the electric mains if it
is NOT used for a long period, before storing, cleaning or performing any
maintenance operation.
operate the appliance when any component or the Main Body itself, is damaged;
cover the appliance during functioning;
insert objects other than food items to be juiced inside the Feed Tube / Bowl
Cover or touch the Auger with your fingers or any utensil during the operation of
the appliance, so as to avoid personal injury or damage to the appliance;
overload the Auger and the Strainer by adding too much ingredients;
detach the Feed Tube / Bowl Cover while the appliance is in operation;
move the appliance while the appliance is switched on and connected to the
electric mains;
use the appliance for more than 15 minutes without interruption. Let the
appliance rest for 10 minutes between processing cycles. After 3 processing
cycles, allow an interval of 15 – 20 minutes to let the appliance cool down before
the next use;
leave the appliance unsupervised during operation.
5

12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
Before plugging and unplugging the Power Cable, make sure the Switch of the
appliance is ‘OFF’. Plug and unplug the Power Cable with dry hands and hold it
firmly. Always unplug the Power Cable to avoid overheating and avoid stretching it
(DO NOT pull it, tug it or use it to drag the appliance to which is connected).
During operation, DO NOT touch the appliance with wet body parts, and it is
recommended to have between you and the standing surface, an isolating element
(for example, wearing shoes with rubber soles).
Wipe the exterior of the Main Body with a soft cloth moistened with water. DO NOT
soak the Main Body, which contains the main engine of the appliance, in water or
other liquids, wash it under the tap, or let any liquid flow into the internal casing of
the appliance to prevent electric shock. In case of accidental fall in water, DO NOT
try to take it out, but first of all unplug immediately the Power Cable from the from
the electric mains.
DO NOT use household cleaners (ammonia, household cleaner, laundry detergent,
floor cleaner, etc.).
Place the appliance at a proper distance from the objects or surrounding walls
making sure that its functioning will NOT cause accidental damages. There should
be at least 10 cm of free space from the back, left & right sides, and the top of the
appliance. Never put things on top of the appliance.
The appliance shall NOT be placed on a surface, or in the vicinity of, objects which
can be damaged by heat such as wood, carpets or plastics. DO NOT locate multiple
portable socket outlets or power supplies at the bottom or rear of the appliance.
If the appliance is operated on wooden furniture, use a protective pad to prevent
damage to delicate finishes.
Avoid placing the Power Cable on abrasive or sharp surfaces or in positions where
it can be damaged easily. The cable must NOT be placed under carpets, or covered
with throw rugs, runners or similar. Arrange the cable away from the high traffic
area, and where it will NOT be tripped over
Always remember to unplug the Power Cable of the appliance if it is NOT used for a
long period, before storing, cleaning or performing any maintenance operation.
Remember that the Auger may still be moving after the Power Cable is unplugged!
Avoid carrying out operations which are NOT specified in this manual (such as
disassembling and/or altering the Main Body).
In case of malfunction or anomaly during the functioning, switch off the appliance
immediately, turn off the power and unplug the Power Cable from the electric
mains. Check the cause of the anomaly, if possible, with the support of a qualified
person.
In the event the mixing of the food items produce bubbles, stop the operation
immediately and wait until the production of bubbles ceases before resuming
blending.
After use, wipe the exterior of the Main Body with a soft cloth moistened with water.
Wash the Pusher, Feed Tube / Bowl Cover, Auger, Strainer, Bowl, Pulp Collector &
Juice Collector under running water immediately after usage to avoid build-up of
bacteria with water & detergent with a non-abrasive sponge.
6

24.
25.
26.
27.
28.
If smoke is observed coming out of the appliance, unplug the Power Cable
immediately
This appliance is NOT intended for commercial use but to be used in households
and similar applications, such as:
• Staff kitchen areas in shops, offices and other working environments;
• Dormitories;
• By clients in hotels, motels and other residential environments;
• Bed and breakfast type environment.
DO NOT use or store the appliance outdoors. Store and use the appliance only
indoors, or in any case, protected from weathering such as rain, direct radiation of
the sun and dust. Ensure that the appliance is clean, dry, and placed in dry and well
ventilated storage. Avoid direct sunlight
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall NOT
play with the appliance. Cleaning and user maintenance shall NOT be made by
children unless they are older than 8 and supervised. Keep the appliance and its
cable out of reach of children less than 8 years old.
Save these instructions.
7

1.
2.
3.
4.
5.
6.
7.
8.
If you are using the appliance for the first time, you should:
Wipe the exterior of the Main Body with a soft cloth moistened with water. Wash the
Pusher, Feed Tube / Bowl Cover, Auger, Strainer, Bowl, Pulp Collector & Juice Collector
with water & dishwashing liquid with a non-abrasive sponge. DO NOT wash any
component in the dishwasher. DO NOT use metal scouring pads. Dry each
component using a soft cloth.
At the bottom of the Bowl sits a Rubber Stopper. When the Rubber Stopper is in
place, it ensures that all juice exits the Bowl via the Juice Outlet and prevents juice
from exiting through the Pulp Outlet. Before using the appliance, make sure the
Rubber Stopper is firmly in place.
Assemble the Bowl to the Main Body.
a.
b.
Assemble the Strainer to the Bowl.
Make sure the red dot on the Strainer lines up with the red dot on the Bowl.
Place the Auger in the center of the Strainer.
Twist the Auger clockwise until it drops into position.
Place the Feed Tube / Bowl Cover onto the Bowl.
a.
b.
c.
Attach the Pulp Collector to the Pulp Outlet.
Attach the Juice Collector to the Juice Outlet.
Make sure the Bowl fits all the way into the shaft of the Main Body.
Align the arrow on the Bowl with the arrow on the Main Body, twist clockwise
slightly to lock. (Note: If the Bowl is not completely locked onto the Main Body,
the machine will not start.)
Align the small arrow on the Feed Tube / Bowl Cover with the red dot on the Bowl.
Twist the Feed Tube / Bowl Cover so that the plastic tab with the arrow on it points
to the ‘CLOSED’sign on the Main Body.
The small arrow on the Feed Tube / Bowl will no longer be aligned with the red
dot on the Bowl once the Feed Tube / Bowl Cover is locked into position.
HOW TO ASSEMBLE
8

1.
2.
3.
4.
5.
6.
7.
Once the appliance is fully assembled, make sure the Switch button on the
appliance is ‘OFF’. Connect the Power Cable to the electric mains and switch on.
The juicer power button (located adjacent to the Handle) has 3 positions:
a.
b.
c.
When adding food items into the Feed Tube / Bowl Cover:
a.
b.
c.
Turn the Switch button on the appliance to‘ON’. When placing any food into the
Feed Tube / Bowl Cover, the Auger will automatically pull in the food, and begin
juicing immediately.
DO NOT overstuff the Feed Tube / Bowl Cover or force food into it. Insert the food
items into the Feed Tube / Bowl Cover slowly to allow the juicer time to work.
The Pusher is only used if food becomes stuck. In the event that this does not work,
please perform the following:
a.
b.
If you need to stop for a while to prepare more food items, it is recommended to
turn the appliance off accordingly. DO NOT run the appliance without any food item
inside the Feed Tube / Bowl Cover as this could overheat the motor
The appliance has a unique cleaning system when switching between different
types of juices. Once a particular juice is done, remove the Juice Collector and pour
out the juice into an appropriate container. Place the Juice Collector under the Juice
Outlet and pour water though the Feed Tube / Bowl Cover while the appliance is
operating. This will rinse out most of the remaining residue from your last juicing.
When the water entering the Juice Collector run clear, that is an indication that the
appliance is clean and ready to make a new juice recipe. Rinse the Juice Collector
and place it under the Juice Outlet once again
When the juicing is completed, turn the Switch button on the appliance to ‘OFF’.
Switch off the electric mains and unplug the Power Cable.
ON - starts the motor and juicing process.
OFF - central position of the button. It switches off the appliance.
REV - use “Reverse” function when food is stuck and needs to be unclogged.
This moves the Auger in the opposite direction.
Always pre-wash food (except food that has to be pealed) before juicing.
Make sure that food items are not larger than 4 cm so it easily fits into the Feed
Tube & Bowl Cover.
Remove any large pips or seeds, such as cherry or plum pits, as it will not process
in the juicer and can damage the Auger.
Turn the Switch button on the appliance to‘REV’ for a few seconds and then try
operating again.
Note: the reverse button works with a ‘pulse’ motion
If the above step does not dislodge the blockage, turn the Switch button on the
appliance to‘OFF’. Switch off the electric mains and unplug the Power Cable.
Disassemble the appliance to remove the stuck food item as indicated in the
section ‘How to Clean and Maintain’ step 2. After removing the food item and
resolving the blockage, reassemble the components as indicated in the section
‘How to Assemble’ steps 3 – 8.
HOW TO USE
9

1.
2.
3.
4.
5.
6.
7.
With the Switch button on the appliance set to‘OFF’, the electric mains switched off
and the Power Cable unplugged,
Dissemble the appliance with the following steps:
a.
b.
c.
d.
e.
f.
g.
Wash the Pusher, Feed Tube / Bowl Cover, Auger, Strainer, Bowl, Pulp Collector &
Juice Collector with water & dishwashing liquid with a non-abrasive sponge.
DO NOT use household cleaners (ammonia, household cleaner, laundry detergent,
floor cleaner, etc.). DO NOT wash any component in the dishwasher.
DO NOT use metal scouring pads.
To remove tough stains, soak the components in dishwashing liquid mixed with
water, equal parts warm water to cider vinegar, or using ½ box of baking soda
added to warm water.
Wipe the exterior of the Main Body with a soft cloth moistened with water.
DO NOT soak the Main Body, which contains the main engine of the appliance, in
water or other liquids, wash it under the tap, or let any liquid flow into the internal
casing of the appliance to prevent electric shock in the future.
Dry each component using a soft cloth.
Ensure that the appliance is clean, dry, and placed in dry and well ventilated storage.
Avoid direct sunlight.
Lift the Pusher from the Feed Tube / Bowl Cover.
Twist the Bowl and the Feed Tube / Bowl Cover as one combined unit to the right
so that the arrow on the Feed Tube / Bowl Cover moves away from the‘CLOSED’
position.
Remove the Bowl and the Feed Tube / Bowl Cover as one combined unit away
from the Main Body, and place it over the sink.
Using a twisting motion, remove the Feed Tube / Bowl Cover from the Bowl.
Using a twisting motion, remove the Auger from the Strainer.
Using a twisting motion, remove the Strainer from the Bowl.
Unplug the Rubber Stopper at the bottom of the Bowl. Run water through the
Pulp Outlet to remove traces of excess food debris.
HOW TO CLEAN AND MAINTAIN
10

PROBLEM SOLVING
Problem Possible Causes How to Solve
The plug is NOT properly
inserted in the power
socket.
Insert the plug into the power
socket. DO NOT use adaptors or
extensions.
The switch at the
electric mains is NOT
switched on and/or the
Switch Button on the
appliance is “OFF”.
Turn on the electric mains and/or
the Switch Button on the
appliance to “ON”.
Overheat Protection
function automatically
stops the appliance from
operating when the
motor is hot.
Disconnect the appliance from
the electric mains and leave the
motor to cool. Use the appliance
for no more than 15 mins before
letting it rest.
The power cable is
defective.
Have the power cable replaced at
the authorised Service Centre.
Lack of power. Check that the house main
breaker is on.
Motor or PCBA
breakdown.
Have the appliance checked at
the authorised Service Centre.
The Bowl, Strainer,
Auger or Feed Tube /
Bowl Cover is not
correctly installed.
Disassemble the appliance
(see step 2 “How to Clean and
Maintain”) & Reassemble the
appliance (see steps 3 – 6“How
to Assemble”)
The appliance does
not work
11

SPECIFICATION
PP3407
MODEL
220-240V ~ 50/60Hz
VOLTAGE
150W
POWER
500ML
CAPACITY
Problem Possible Causes How to Solve
The Strainer is stuck
with ingredients.
DO NOT continue if the Strainer
is blocked.
Use the Pusher if food is stuck.
If that does not dislodge the food,
press the Switch button to ‘REV’
for a few seconds; or switch off
the appliance, unplug the Power
Cable, and disassemble the
appliance (see step 2“How to
Clean and Maintain”). Dislodge
the food item. Reassemble the
appliance. (see steps 3 – 6“How
to Assemble”)
To prevent further blockage, cut
the ingredients into smaller
pieces or put less ingredients.
The appliance stops
working while in use
It is a normal
phenomenon when a
new motor is initially
used.
The smell will disappear with use.The motor gives off an
unpleasant smell while
in operation
Check the location of
the appliance and
where it is placed.
Place and use the appliance on a
horizontal, stable and
heat-resistant surface.
Ensure that the appliance is
standing at an upright position
before switching on the appliance.
Check whether the
particular food item is
suitable to be placed in
a Slow Juicer.
Remove the food item if needed.
Also, DO NOT put in too much
food at one time.
The appliance makes
abnormal noise
12

This appliance, along with all other electronic appliances, should, when it is no longer capable of
functioning, be disposed with the least possible environmental damage according to the local
regulations in your area. In most cases you can discard the appliance at your local recycling centre.
DISPOSAL: Do not dispose this appliance as unsorted municipal waste.
Collection of such waste separately for special treatment is necessary.
Risk of child or animal entrapment
Before you discard this appliance, please remove all doors and leave the shelves inside so that
children or animals may not easily get trapped inside.
ENVIRONMENTAL TIP
Warranty Conditions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
This warranty provides against defective materials and manufacturing faults throughout for
two years from the date of purchase of the appliance. The warranty on the Compressor is 10
years subject to the same conditions as above.
This warranty also does not cover normal wear and tear, replacement of consumable
materials and accessories, and the cost of maintenance of the appliance.
This warranty does not cover the repair or replacement of part/s damaged by misuse,
accidents, negligence, alterations, or modifications in any way, or repairs done by any repair
organisation without the prior consent of PowerPac Electrical Pte Ltd.
Repair and service are to be performed at: 5 Changi South Lane #03-01 Singapore 486045.
A transport fee will be charged for personal doorstep service.
The original purchaser of the appliance must furnish proof of purchase to our Service Centre
with the email or number as registered during submission of warranty when this appliance is
sent for repair/service. Failure to do so may delay the receipt of said repair/service by the
customer.
Under no circumstances whatsoever shall the serial number be erased, defaced or altered by
the customer and/or his representatives, or the dealer and/or his agents. Failure to ensure
this shall invalidate the warranty.
This warranty is deemed to be void if the defect is cause by the attack of household pests,
fire, lightning, natural disasters, pollution, abnormal voltage or the usage of generators.
This warranty is valid in Singapore only.
This warranty will be honoured subject to the customer’s registration of the warranty
inclusive of original invoice or valid purchase receipt. Failure to present these documents will
result in denial of service. However, if the customer still requests that the defective appliance
be repaired, PowerPac Electrical Pte Ltd may, at its discretion, repair the appliance but impose
a labour charge, as well as the costs of the replacement parts, to be borne solely by the
customer.
Please refer to the attached picture for the location of one of our appliance’s serial number,
as an example.
Please complete the on-line registration warranty form available
on our website. There is no further requirement to send us any
hard copy as part of our efforts to save the environment.
In accordance with the terms and conditions of this limited
warranty as stated above, PowerPac Electrical Pte Ltd, at its
expense shall provide free services for the appliance within the
warranty period from its date of purchase from our Authorised
dealers.
WARRANTY
E-Register scan
13

Tanah Merah Stn Exit B »» Bus No. 2/9/48(Stop ID: 85091)
»» 5 min (4 stops) »» Bef Changi Fire Stn (Stop ID: 85071)
»» Walk About 6 min, 500m
Simei MRT »» Bus No. 9 (Stop ID: 85079)»» 6 min (3 stops)
»» Flextronic (Stop ID: 96161) »» Walk About 6 min, 500m
Address: 5 Changi South Lane, #03-01 S(486045)
OFFICE / SERVICE CENTER
PowerPac Electrical Pte Ltd Tel: [phone]
E Warranty Registration
E-Register scan
Please complete the on-line registration warranty form below.
There is no further requirement to send us any hard copy as part of
our efforts to save the environment.
In accordance with the terms and conditions of this limited warranty
as stated below, PowerPac Electrical Pte Ltd, at its expense shall
provide free services for the appliance within the warranty period
from its date of purchase from our Authorised dealers.
This warranty will be honoured subject to the customer’s registration
of the warranty inclusive of original invoice or valid purchase receipt.
Failure to present these documents will result in denial of service.
However, if the customer still requests that the defective appliance
be repaired, PowerPac Electrical Pte Ltd may, at its discretion, repair
the appliance but impose a labour charge, as well as the costs of the
replacement parts, to be borne solely by the customer
follow us on
face book
follow us on
tiktok
ITE
Flex
No. 5
ARALOGOS
Changi
Fire Station
Entrance
No.3
Mapletree
No.1
PROLOGIS
Goodrich
Global
85071
(Bus No. 2/9/10/48)
85079
(Bus No.2/9/10/48)
96111 (Bus No. 31 / 118)
Simei Ave
Simei / Tampines
Simpang Bedok
Expo
Upper Changi RD
WE ARE HERE
(LEVEL 3)
Changi S Ln
Kian Ann
SG5
Onn Wah
Product Serial No
Sample
Refer rating label at
bottom of product