PowerTraveller DEFENDER User manual

DEFENDER &
DEFENDER PRO
USER GUIDE AND
WASHING GUIDE

DEFENDER
1. Wash your hands thoroughly before putting the
mask on.
2. Place each elastic around the ear. Adjust the mask
so that it provides a tight but comfortable fit around
your nose and mouth by adjusting the strap.
3. Put on and remove your mask carefully. Avoid
touching your eyes, nose and mouth when removing
the mask. Wash your hands immediately after
removing.

STEP 1 STEP 2 STEP 3

DEFENDER PRO
1. Wash your hands thoroughly before putting the
mask on.
2. Insert the filter in the pocket inside the mask.
3. Place each elastic around the ear. Adjust the mask
so that it provides a tight but comfortable fit around
your nose and mouth by adjusting the strap.
4. Put on and remove your mask carefully. Avoid
touching your eyes, nose and mouth when removing
the mask. Wash your hands immediately after
removing.

STEP 1 STEP 2
STEP 3 STEP 4

WASHING INSTRUCTIONS
It is strongly advisable to wash the mask with hand & detergent
and hang to dry to prolong the product's life.
The masks will stand up to 40 - 50 machine washes depending
on the cycle type .
Use cool water temperature, gentle cycle, at lower spin. Use
non-chlorine bleach only.
Tumble dry low. Do not iron.
As with any other garment or textile product, if discoloration
occurs or the mask becomes uncomfortable, you should replace
the mask.
Washing the filter are not recommend as machine wash will
diminish 95% filtration capacity of the filter. You may sanitize
the filter after each use.

WARNING
The masks are not surgical masks and are not intended to
provide liquid barrier protection.
Masks are not certified for use in medical settings. Consult
your supervisor prior to use in a medical setting.
Masks are not NIOSH certified N95 respirator
Misuse may cause injury or death
Wearing the mask will block particulates, including those
carrying various viruses, but we cannot guarantee against
contraction of any infections or diseases.
Time use limitation: Replace the mask and/or the filter when
it becomes damaged or dicult to breathe through.

Part Code: PPE-GDP001
Ean Code: 5060176985100
Part Code: PPE-BDP001 
Ean Code: 5060176985070
DEFENDER PRO
GRAY
DEFENDER PRO
BLACK
DEFENDER PRO
S P E CIF I C AT I ONS:
Part Code: PPE-GDF001 
Ean Code: 5060176985049
Part Code: PPE-BDF001 
Ean Code: 5060176985018
DEFENDER
GRAY
DEFENDER
BLACK
•
•
•
•
•
•
•
95% filtration ecieny against 0.3 micron or larger
particulates
MERV16 Rating
Three layer lightweight composite filter: Spunbound
non-woven Polypropylene/Nanofiber/Non-woven
Polyester
Mask dimensions with filter: 8" x 6.3" (20.3cm x 16cm)
Replaceable filter: Light design 0.04”/1mm thickness &
2.06-2.36 oz/yd2 (70-80 g/m2) weight
Replaceable filter: Air permeability of 28-35 cfm
Replaceable filter designed for comfort and
breathability: (air flow resistance) Pressure Drop <60 Pa
DEFENDER
S P E CIF I C AT I ONS:
•
•
•
•
•
•
Face-seal mask providing a tight fit around nose and mouth
Made in the USA
Designed to provide comfort and ease of breathing
Eective filtration through double layer
Washable and reusable
Outer layer of mask, made from Spandex