PowerWalker VFI 3000 LCD Installation guide

Product Information
PowerWalker is a brand of:
BlueWalker GmbH Phone: [phone] / 92 98 73 • ax: +49 (0) 2137 / 78 73 925
Martin-Buber-Strasse 12 • D-41470 Neuss • Germany [email protected] • www.bluewalker.eu • www.powerwalker.com
PowerWalker VFI 3000 LCD
Online UPS
3000VA Online UPS
6
IEC Outlet, Modem/Phone Surge Protection, EPO
function
USB & RS-232 Connection for monitoring
LCD display to show all UPS settings
Programmable power management outlets
Product Features
With true double-conversion design, PowerWalker V I 3000 LCD provides
powerful and overall protection to your sensitive devices. It can accept wider
input voltage for harsh environment. It's perfect protection for your servers
and workstations.
• True double-conversion
• Output power factor 0.8
• Wide input voltage range (110-300 VAC)
• Input power factor correction 0.98
• 50/60 Hz frequency converter mode
• ECO mode operation for energy saving (ECO)
• Programmable power management outlet
• Emergency power off (EPO) function
• WAGO connection kit (for external battery packs) included
• Optional SNMP module
Backsite view
Item
-
N
o
.
10120106
Connection terminal

Product Information
PowerWalker is a brand of:
BlueWalker GmbH Phone: [phone] / 92 98 73 • ax: +49 (0) 2137 / 78 73 925
Martin-Buber-Strasse 12 • D-41470 Neuss • Germany [email protected] • www.bluewalker.eu • www.powerwalker.com
Technical Details
Product Features
Ca acity 3000VA / 2400W
In ut
Voltage Range
Low Line Transfer 160/140/120/110VAC ± 5%
Voltage Range
Low Line Comeback 175VAC ±5%
Voltage Range
High Line Transfer 300VAC ± 5%
Voltage Range
High Line Comeback 290VAC ± 5VAC
Frequency Range 50Hz or 60Hz
Phase Single phase with ground
Power Factor +/- 1Hz
Out ut
AC Voltage Regulation
(Batt. Mode) ± 3 %
Frequency Range
(Synchronized Range)
47 ~ 53Hz or
57 ~ 63Hz
Frequency Range
(Batt. Mode)
50Hz ± 0.25Hz or
60Hz ± 0.3Hz
Current Crest Ratio 3:1
Harmonic Distortion ≤ 4% THD (Linear Load)
≤ 7% THD (Non-linear Load)
Waveform (Batt. Mode) Pure Sine Wave
Transfer Time
Inverter to By ass 4ms (Typical)
Efficiency
AC Mode 88%
Battery Mode 83%
Battery
Ty e 12V / 9Ah
Quantity 6x
Recharge Time 4h to 90%
Audio Indicators
Battery Mode Beep every 4 sec
Low Battery Beep every second
Overload Beep twice every second
Fault Continuously sounding
O tional Accessoires
SNMP Module DP-801 Item-No. 10120502
Battery Pack (12V / 9Ah) Item-No. 10120511
Version: EN 12/04/2011
We reserve the right for technical changes and mistakes
LCD Dis lay
LCD Indicators
UPS status, Load level, Battery level,
Input/Output voltage, Discharge
timer, and ault conditions
Connections
Communication USB port & RS-232 port
Outlets 6x IEC (2x programmable)
Protection Port RJ-11 in/out
SNMP optional
EPO Yes
WAGO connection Yes, kit included
Software & System Requirements
Software ViewPower
O erating System or details visit:
www.powerwalker.com/viewpower.html
Other 1x USB port or 1x RS-232Port
Product Details
Dimensions 421mm x 190mm x 318mm (DxWxH)
Colour Black
Weight UPS case 29.1kg
Fan Control Always on
Noise Level < 45dB at 1 meter
Model Code V I 3000 LCD
Environment
Tem erature 0°C – 40°C
Humidity 20 - 90% (non-condensing)
Package Content
Package Content PowerWalker V I 3000 LCD,
Software CD, USB cable, 2x IEC
output cables, power cord, WAGO
connection Kit, printed manual
Logistic Data
Giftbox Language EN/DE/ R/ES/IT/PT/SE/ I/NO/TR
RU/UA/BY/PL/CZ/HR/HU/BG/KZ/CS
Manual Language EN/DE/ R/ES/RU
Dimension/Giftbox 555mm x 325mm x 465mm (DxWxH)
Weight/Giftbox 31.5kg
Pieces/carton 1
Pieces/ alette 16
BlueWalker
Item-No. 10120106
EAN 4260074972757
Warranty 24 Months (except battery)
Use UPS configurator on www.powerwalker.com for
detailed backup time information.