Powerware 5140 User manual

5140
Integration
www.invensys-power.com/ibm-ups/9910solutions.html, 5140Install - eServer rev Apr ‘01 Page 1
5140 - pSeries (RS/6000)
Integration
◆TOPICS
◆Preparation
✔Installation
◆Startup
◆Optional Features
◆Help/Resources

5140
Integration
www.invensys-power.com/ibm-ups/9910solutions.html, 5140Install - eServer rev Apr ‘01 Page 2
Installation
◆Step 1 - If UPS ordered with pSeries
(RS/6000) Server, the UPS is pre-
installed in the Server Rack - Go to
Step 4
UPS located at
bottom of rack

5140
Integration
www.invensys-power.com/ibm-ups/9910solutions.html, 5140Install - eServer rev Apr ‘01 Page 3
Installation
◆Step 1 - If UPS ordered as MES -
Remove UPS equipment from Cartons

5140
Integration
www.invensys-power.com/ibm-ups/9910solutions.html, 5140Install - eServer rev Apr ‘01 Page 4
Installation
P60/61 Installed in
T00 or R46 Rack
Rear View
◆Diagram - UPS in the System Rack
P60/61 Installed in
T00 or R46 Rack
Front View

5140
Integration
www.invensys-power.com/ibm-ups/9910solutions.html, 5140Install - eServer rev Apr ‘01 Page 5
Installation
◆Step 2 - Find and Read the Manuals
◆Obtain a copy of “Powerware 5140 9910 Powerware 5140 9910
Installation Guide for IBM Applications
Installation Guide for IBM Applications”and
“Powerware 5140 User’s Guide Powerware 5140 User’s Guide” from URLs noted:
www.invensys-power.com/ibm-
ups/rs6000.html, select Operating
Manuals “Powerware 5140 Installation
Guide”
www.invensys-power.com/ibm-
ups/rs6000.html, select Operating
Manuals “Powerware 5140 User’s
Guide”

5140
Integration
www.invensys-power.com/ibm-ups/9910solutions.html, 5140Install - eServer rev Apr ‘01 Page 6
Installation
◆Step 3 - Battery Pack Installation
◆If IBM FC 6606 (Powerware PN 05146400-3901)
ordered with UPS, battery pack is installed in the
System Rack
◆If IBM FC 6606 ordered as MES (upgrade),
complete the following
❖Remove Battery Packs from cartons (cartons marked 9910-
artons marked 9910-
6606)
6606) as directed in the Powerware 5140 User’s Guide

5140
Integration
www.invensys-power.com/ibm-ups/9910solutions.html, 5140Install - eServer rev Apr ‘01 Page 7
Installation
◆Battery Cabling UPS and two battery module
❖Go to Powerware 5140 User’s Guide
Powerware 5140 User’s Guide for more installation
information

5140
Integration
www.invensys-power.com/ibm-ups/9910solutions.html, 5140Install - eServer rev Apr ‘01 Page 8
Installation
◆Step 4 - Complete Wiring
◆Model P60
Install 2 pole, 3-wire 250V insulgrip
twist-lock receptacle (Hubble part
number CS8269) and 50A circuit
breaker (200-240V).
Input power cord terminated in 2
pole, 3-wire 50A 250V plug (Hubble
part number CS8265C)

5140
Integration
www.invensys-power.com/ibm-ups/9910solutions.html, 5140Install - eServer rev Apr ‘01 Page 9
Installation
◆Step 4 - Complete Wiring
◆Model P61
Install conduit (flexible metal
conduit is recommended for ease of
service and maintenance) with
single-phase 3-wire (hot, neutral
and earth) input circuit (200 - 240V),
terminated in a 40A circuit with
short circuit and overcurrent
protection

5140
Integration
www.invensys-power.com/ibm-ups/9910solutions.html, 5140Install - eServer rev Apr ‘01 Page 10
Installation
◆Step 5 - Wiring Completed
◆Energize Mains power to UPS
◆Power is now present to the UPS
❖The UPS does a brief self test, turning various front panel
lights off and on
◆If you have questions go to: “Powerware 5140 Powerware 5140
User’s Guide
User’s Guide” or “Powerware 5140 9910 Powerware 5140 9910
Installation Guide for IBM Applications
Installation Guide for IBM Applications”