PowerXL Smokeless Grill Plus User manual

Reassemble the parts in
the same order they
were packaged
(see reverse side for
detailed instructions).
Disassemble the packed
parts and remove all
packaging materials.
Attach the Power Cord
to the Base Unit
and then plug the
Power Cord into
an outlet.
Press the Power Button
and then the Fan Button.
Set the temperature to
a medium or high heat
setting for 4–6 mins.
to preheat the grill.
Then, set the desired
cooking temperature and
add your food!
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5
Ensure that the Water
Tray is in place and
ll with about
2 cups of water.
See owner’s manual
for complete instructions
and important safety
information before
using this product.
PXL_SG-PLUS_QSG_WM_ENG_V1_200211
IMPORTANT: Unpack all parts from the box and remove any clear or blue protective lm on the components.
Wash with warm, soapy water before rst use (only select accessories are dishwasher safe).

1. Place the Base Unit (A) on a stable, level surface.
2. Place the Drip Tray (B) inside the center of the
Base Unit (A).
3. Place the Heating Element (C) on top of the Drip
Tray (B). Align the arrows on the Drip Tray (B) with
the arrows on the Base Unit (A).
4. Place either the Grill Plate or Griddle Plate (D) on
top of the Heating Element (C).
5. When cooking with the Glass Lid (E), place the
Glass Lid (E) over the Grill Plate or Griddle Plate (D).
*NOTE: The removable Electric Fan (A1), Fan
Cover (A2), and Collection Pan/Water Tray are
already installed in the Base Unit (A). If you are
thoroughly cleaning the Base Unit (A) with water
and detergents, remove the Electric Fan (A1) rst.
See Removing the Electric Fan in the owner’s
manual for detailed instructions.
GLASS LID
NONSTICK GRILL PLATE
& OPTIONAL GRIDDLE PLATE
HEATING ELEMENT
(With Detachable Power Cord)
DRIP TRAY
BASE UNIT WITH
WATER TRAY
ONE
PIECE*
ELECTRIC FAN
(Installed in Base)
FAN COVER
(Installed in Base)
E
D
C
B
A
A1
A2
Assembly
SAVE THESE INSTRUCTIONS
}