PowerXL Smokeless Grill User manual

Disassemble the packed
parts and remove all
packaging materials. Wash
all parts with soap and
water. Dry the parts
before use.
Attach the Power Cord
to the Base Unit
and then plug the
Power Cord into
an outlet.
Press the Power Button
and then the Fan Button.
Set the temperature to
a medium or high heat
setting for 4–6 mins.
to preheat the grill.
Then, set the desired
cooking temperature and
add your food!
STEP 1
Reassemble the parts in
the same order they
were packaged.
(see reverse side for
detailed instructions).
STEP 3 STEP 4 STEP 5
STEP 2
Ensure that the Water
Tray is in place and
ll with about
2 cups of water.
See owner’s manual
for complete instructions
and important safety
information before
using this product.
PXL-SG_QSG_RTL_ENG_V1_210222
IMPORTANT: Unpack all parts from the box and remove any clear or blue protective lm on the components.
Wash with warm, soapy water before rst use (only select accessories are dishwasher safe).

1. Place the Base Unit (A) on a stable, level surface. 2. Place the Collection Pan/Water Tray (B) inside the
center of the Base Unit (A).
3. Place the Drip Tray (C) on top of the Collection Pan/
Water Tray (B) inside the Base Unit (A).
4. Place the Heating Element (D) on top of the Drip
Tray (C). Align the arrows on the Drip Tray (C) with the arrows on the Base Unit (A).
5. Place either the Grill Plate or Griddle Plate (E) on
top of the Heating Element (D).
6. When cooking with the Glass Lid (F), place the
Glass Lid (F) over the Grill Plate or Griddle Plate (E). *NOTE: The removable Electric Fan (A1) and Snap-Off Fan Cover (A2) are already installed in the Base Unit (A). If you are thoroughly cleaning the Base Unit (A) with water and detergents, remove the Electric Fan (A1) rst.
See Removing the Electric Fan in the owner’s manual for detailed instructions.
GLASS LID NONSTICK GRILL PLATE & OPTIONAL GRIDDLE PLATE HEATING ELEMENT (With Detachable Power Cord) DRIP TRAY BASE UNIT WITH
ONE PIECE*
ELECTRIC FAN (Installed in Base) FAN COVER (Installed in Base)
F
E
D
C
A
A1 A2
Assembly
SAVE THESE INSTRUCTIONS
}
COLLECTION PAN/ WATER TRAY
B