PR CASA ROLLO User manual

MOUNTING INSTRUCTIONS
CASA ROLLO
IN
S
ID
E
Herrmann-Staudinger-Straße 10 - 16
63110 Rodgau
Tel: [phone]
Fax: [phone]
E-Mail: [email protected]
Internet: www.rp-group.com
The illustration may be dierent as the product is constantly being developed.
Errors and misprints reserved! Version 02/2021 • ANL-EN-YMOCA-ROLLO
TECHNICAL DATA:
YMOCA-ROLLO
Input voltage AC: 230V
Frequency: 50/60 Hz
Maximum motor power: 345VA
Reserve: 0,15W
Terminals diameter: max. 1,5mm²
Frequency band: 2,4…2,483 Ghz
Max. transmission power: +4 dBm
Switching cycles: 50.000
Consumer: inductive Load (Motor)
Button connectors: 2
Temperature range: -20 C° bis +50 C°
Certicates: CE, RoHs
Protection class: IP20
Dimension: 143 x 38 x 27mm
Material: Polycarbonate
Maximum housing temperaturer: +60C°
Storage temperature: -25C° to +75C°

PROGRAMMING NOTE:
- Maximum one motor per CASA Rollo
- Enable control hierarchy - Important for the timeout setting
1. More
2. Network conguration
3. Control options
4. Enable “Use control hierarchy“
- Enable own Timeout for CASA Rollo – don‘t use global timeout
1. Luminaires
2. Double click on the module
3. Manual control
a. Behavior “Always Timeout“
b. Timeout – set individual time (for example – 10sec longer
than the shutter needs to run up or down)
- SW1/SW2 out carries 230V – Attention!
- Connect only buttons not switches
- Take the phase for the button from the CASA Rollo (SW1 out / SW2 out) (see
diagram on the data sheet) - do not connect an external phase - is internally
wired through
- Button setting via „Control of the elements“ - Optional, if buttons for shutter
control are planned
UNBOXING:
Take the product carefully out of the packaging and remove any transport protection
or protective lm. Before disposing of the packaging, please check that all parts of
the product have been removed. Check the packaging for completeness:
1x YMOCA-ROLLO
Is everything complete? Then the assembly can begin...
1
INSTALLATION SITE:
The product is only to be used for indoor assembly.
Note that the electrical connection may only be carried out by a qualied electrici-
an. For safe installation, the product may only be installed on a stable surface. No
installation on or near (50cm) ammable materials.
2
!
SAFETY NOTICE:
Work on electrical systems and electrical equipment may only be carried out by a qua-
lied electrician. It is essential to disconnect the electrical line from the power supply
before starting installation.
DISPOSAL INFORMATION:
Do not dispose this product in household waste!
Products with the symbol WEEE, 2003/108 must
be disposed at the local electronic waste disposal!
If the housing is opened, the guarantee expires!
DESCRIPTION:
The CASA Rollo module is used for wireless control of shutters, blinds or awnings.
The rmware can easily be downloaded and used free of charge via the CASAMBI®
app from the “Play Store” (Google Android) or from the “App Store” (Apple). The
entire conguration and settings are made exclusively via the app.
For more information about the CASAMBI® product range, please contact our sales
team, who can also oer you complete solutions.
3
CONNECTION PLAN: