Precia Molen i 40 User manual

WWW.PRECIAMOLEN.COM
i 40 Indicator
User Manual
04-55-00-1 MU D - 07/2015
i40-SS
i40-DR
i40-PM
i40-JB

This guide is intended for i40 indicator users.
It allows starting the equipment quickly. For electrical
connection and installation, refer to the following manuals:
•Wiring diagram: 04-50-00 DD.
•Installation manual: 04-55-00 MI.

204-55-00-1 MU D
i40Indicator
Contents
Foreword
Documentary conventions .............................................................................................. 2
Environmental characteristics ........................................................................................ 3
Safety ............................................................................................................................. 3
Electromagnetic compatibility ......................................................................................... 4
Overview
Keyboard ........................................................................................................................ 5
Navigation principle ........................................................................................................ 6
Screen ............................................................................................................................ 7
Help area – Valid key indication detail ........................................................................... 8
Basic parameters ........................................................................................................... 8
Operator functions
Introduction ..................................................................................................................... 9
Power on ........................................................................................................................ 9
Zeroing ........................................................................................................................... 10
Taring ............................................................................................................................. 10
Initial zero setting ...........................................................................................................10
Gross weight recall ......................................................................................................... 11
Range W2 ...................................................................................................................... 11
Information viewing ........................................................................................................ 11
DSD reading ................................................................................................................... 13
Operator setting
Introduction ..................................................................................................................... 14
Manually entering a tare value (preset tare) ................................................................... 14
Threshold configuration .................................................................................................. 15
Metrological screen ........................................................................................................ 16
Operator configuration
Introduction ..................................................................................................................... 17
Threshold configuration .................................................................................................. 17
Threshold switching ........................................................................................................ 18
Saving ............................................................................................................................ 19
Error messages

04-55-00-1 MU D 3
Foreword
Documentary conventions
Pictograms
Shown on the device, they indicate a reference to the hereby manual for
further information about the nature of potential dangers and all the
measures that have to be taken to prevent them.
Major caution related to people’s safety.
Note related to the preservation and correct maintenance of the device.
Note aimed at making the reading of the manual easier and/or at
implementing the device optimally.
Recycling
•In compliance with the requirements of the European Directive 2012/19/EU related
to the electrical and electronic equipment waste, this device, including accessories
and batteries must not be disposed of with regular household waste. This device
must be disposed of according to local recommendations in a separate contained
aimed at electrical and electronic equipment.

404-55-00-1 MU D
i40Indicator
Environmental characteristics
•Temperature range:
- in operation ..................................................... 20°C / 55°C (+4°F / +119°F)
- in charge with the battery option ..................... 20°C / 30°C (+4°F / +94°F)
•Relative humidity without condensation ............. 10 % / 85 %h
•Minimum atmospheric pressure ......................... 795 hPa (1)
•Protection index
- i 40 SS and i 40 JB..........................................IP66 (2) EN 60529 compliant
- i 40 DR.............................................................IP30
- i 40 PM.............................................................IP54 on front panel
•Standard power supply:
- voltage............................................................. 9 V to 30 V DC (3)
- typical max. consumption ............................... 1.4 W
- max. consumption option 4-20mA / 0-10 V...... 1.8 W
- max. consumption field bus option ................. 2.7 W
•Mains power supply:
- voltage............................................................. 110 V / 230 V (4)
- frequency ........................................................ 50 Hz / 60 Hz
- consumption ................................................... 0.35 A
Safety
The norm CEI 61010-1 indicates that in case of devices connected to an electrical plug,
this plug must be installed near the device and easily accessible. The supply cord acts as
cutting device. For the equipment permanently connected to the network, an easily accessible
cutting device must be included to the fixed installation.
The mains tension must not fluctuate of more than 10% of its nominal tension.
The connection to the mains supply and the type of cord must comply with the safety
regulations of the country in which the equipment is set up. If it is not the case, please contact
your PRECIA-MOLEN agency.
1 Equivalent to a 2 000 m altitude.
2 IP69 en option sur i 40 SS.
3 22 V DC mini si option 4-20 mA.
4 For Saudi Arabia only the 230 V is authorized.

04-55-00-1 MU D 5
Electromagnetic compatibility
This equipment has been tested and declared compliant with the limits of the class A digital
device limits, according to the European regulations, Section 15 of FCC rules (US Federal
Communication Commission) and Canadian ICES-003 rules.
•These limits aim at offering sufficient protection against interferences when the
device is used in a trade environment. If the device is used in a residential area, it
may cause interferences and in these circumstances, the user will have to correct
the situation at their own expenses.

604-55-00-1 MU D
i40Indicator
Overview
Keyboard
Function
Escape Escape a menu or the input without having it taken
into account.
Menu - In operating mode, provides access to
application setting.
- Allows entering configuration mode by
pressing and holding power.
Validation Input in a menu or take into account the current
input.
+ Restart Hold these keys pressed to restart the indicator.



Navigation keys Navigating in the menu or list options.
Indication < > in the help area.
Zeroing
Taring
Gross weight recall

04-55-00-1 MU D 7
Navigation principle
•The navigation keys allow moving in menus and lists of predefined values. They
are active when the symbols < > are displayed in zone 3of the screen (Voir
“Screen”, page 8.):
•In the same case for the consultation of recorded values:
•In case of navigation error:
•Reach the store option (configuration mode):
 1. Scroll through the options at the same level (or possible
values).
2. Validate the selected option (or the selected value).
 Scroll through the displayed information.
Exit a menu, an item or option (move up one level).
Back to the configuration top level menu to reach the
storage option.
Actuate the button repeatedly, if necessary.

804-55-00-1 MU D
i40Indicator
Screen
Function
Title / Symbol Operating mode
1. Weight area Displaying weight present on the receiver.
2. User area Indications intended for the user.
3.
Help area.
-NET indication if tare taken into account.
- Additional unit.
- Indication of valid keys.
See detail below.
4. kg g t lb Unit.
5. D- No symbol. The displayed weight is a metrological
reference.
-SymbolDdisplayed. The displayed weight is not a
metrological reference.
6. W1W2 Range 1 or 2 is active.
The weight is unstable.
The weight is in the zero area and stable.
7. Confirmation of a key-press





888
8888888888


7 2 6
4
3
5
1

04-55-00-1 MU D 9
Help area – Valid key indication detail
Basic parameters
Language
•PARAMETERS / LANGUAGE
Choose English or French.
Display
•PARAMETERS / DISPLAY / ECO MODE allows setting auto-extinction:
•PARAMETERS / DISPLAY / BRIGHTNESS adjusts the backlight intensity:
3 levels or extinction.
•PARAMETERS / DISPLAY / COLOR sets the background colour of the
screen: 7possible colours.
<> Choice of menu, of value.
0-9Numeric input.
0-ZAlphanumeric input.
1-6Numeric entry between two specified values (e.g.between 1 and 6).
<> Indication of a menu (even if there is only one option).
ESC Escape a screen showing data display only.
$Validation by if necessary
ON - Turning off the backlight after 30s of inactivity, weight to zero.
- After 1hour of inactivity, weight zero, the indicator turns off.
OFF Not auto-extinction.

10 04-55-00-1 MU D
i40Indicator
Operator functions
Introduction
The operator functions are available when the indicator is powered on.
Power on
1. The instrument performs a self-test.
Check the proper display operation (no
defective segment).
2. The software version is displayed.
3. The self-test is complete, the instrument
initialises the measurement and it is ready for
use.







888

8888888888








T: 0 KG

04-55-00-1 MU D 11
Zeroing
When the load receiver is empty and the displayed weight is not zero, the zero function
allows to reset to zero the displayed weight (This function is limited to 2% of the maximum
instrument range from the initial zero in trade use or to a configuration value outside legal
metrology).
Taring
The taring function allows storing the load weight in place on the receiver (container) as
tare value and then obtain the product net weight (displayed weight = total weight - tare).
Initial zero setting
This zero setting can be made when the indicator is powered on. To do this, when
powering on, the user presses the key until the equipment starts.
This zero is used as reference to other zero devices.
1. Receiver empty, the weight displayed is different
from zero.
2. Select the reset to zero function ().
The displayed weight is set to zero.
1. Place the container on the load receiver.
2. Select the taring function ().
The displayed weight corresponds to the net
weight.




O1:50.0KG





O1:50.0KG




O1:50.0KG





O1:50.0KG

12 04-55-00-1 MU D
i40Indicator
Gross weight recall
Range W2
In dual range, the measurement range selection is ensured automatically by the
instrument based on the weight on the receiver. It is possible to force the instrument to use the
range W2.
Remark: This function is only available for dual range models.
Information viewing
Press the keys and to scroll through the various information available.
1. The result of a net weighing is displayed.
2. Press the key .
The screen changes colour (cyan) and the result
is displayed as gross weight for a few seconds.
1. Weight threshold value 1.
2. Weight threshold value 2.




O1:50.0KG





O1:50.0KG





O1:50.0KG





O2:100.0KG

04-55-00-1 MU D 13
3. Weight threshold value 3.
4. Weight threshold value 4.
5. Tare value.
6. Output status.
When one of the thresholds is exceeded, its
status moves from 0 to 1.
7. Input status.
8. Weight in High Resolution.
The last number corresponding to the high
resolution is displayed in red.





O3:200.0KG





O4:300.0KG





T: 1.0KG





O: 0 0 0 0




O: 1 1 0 0





I: 0 0





HR:105.02

14 04-55-00-1 MU D
i40Indicator
DSD reading
1. Press key and scroll through the various
functions with the navigation keys.
2. Select the function DSD and then validate ().
3. Select the function READ DSD and then
validate (),
or select the function DSD REF.and then
validate ().
This reference allows identifying a bridge.
4. Select the function DSD NUM and then
validate ().
5. Enter the record number to be read using the
keys et and then validate.
Remark: Enter 0 to display the last recording.
6. Validate once again to view the information
corresponding to the record.




MAX :




< >
DSD.




< >
READ DSD




< >
DSD REF.




< >
DSD NUM




0-9
349




< >
RECORD

04-55-00-1 MU D 15
Operator setting
Introduction
Press key to access operator setting. Then use the keys and to access various
available functions.
Manually entering a tare value (preset tare)
This function allows to manually entering a tare value for the net weight display.
1. Select the preset tare function (PT) and then
validate ().
2. The actual tare value is displayed.
3. Enter the new tare value by pressing the
navigation keys:
•and : Change the selected number
value.
•and : Move from one number to another.
4. Validate this new value ().
The value is taken as tare value. The weighing
result is now displayed as Net.



< >
PT



0-9
0 KG




0-9
0.170 KG



NET
T: 0.170 KG

16 04-55-00-1 MU D
i40Indicator
Threshold configuration
1. Select threshold 1 and then validate ().
Set the threshold value and then validate to
move to the next threshold.
2. Select threshold 2 and then validate ().
Set the threshold value and then validate to
move to the next threshold.
3. Select threshold 3 and then validate ().
Set the threshold value and then validate to
move to the next threshold.
4. Select threshold 4 and then validate ().
Set the threshold value and then validate to
move to the next threshold.





< >
THRESHOLD1





O1:50.0KG





< >
THRESHOLD2





O2:100.0KG





< >
THRESHOLD3





O3:200.0KG





< >
THRESHOLD4





O4:300.0KG

04-55-00-1 MU D 17
Metrological screen
1. Select the metrology label and then validate
().
2. Press key to view the metrological data.
The corresponding information is:
•MAX: Equipment maximum range (A).
•MIN: Equipment minimum range (A).
•e: Step (C).





< >
MET.INFO





MAX :





300.0kg
A





MIN :





20e
B





e :





0.1kg
C

18 04-55-00-1 MU D
i40Indicator
Operator configuration
Introduction
Press key at indicator power on or restart to access the operator configuration.
Threshold configuration
1. Select the function THRESHOLD N in the configuration menu.
(LOGIN / OPERATEUR / APP / THRESHOLD N).
2. Enter the parameter ACTIVE.
This parameter allows enabling the threshold:
•YESthreshold enabled.
•NO threshold disabled.
3. Enter the parameter WEIGHT.
This parameter allows selecting the threshold switching mode:
•NET the action is carried out on NET weight.
•GROSSthe action is carried out on GROSS weight.
4. Enter the parameter TRIGGER.
This parameter allows selecting the output switching time:
•>= THRESHOLDoutput enabled if the weight is greater than or equal to the
threshold, otherwise disabled.
•<= THRESHOLD output enabled if the weight is less than or equal to the
threshold, otherwise disabled.