Premier PolyBoard Series User manual

PolyBoard Paper Trimmers
Key Features and Benefits
• Self-sharpening through-hardened high carbon steel blades cut up
to 10 sheets
• Permanent 1/2” grid and dual rulers for proper paper alignment
• Patented automatic blade latch locks with every cutting motion
• Finger guard helps protect the entire blade length
• Torsion spring counterbalances blade arm
• Non-skid feet
Model Numbers
P212X – 12” cutting length
P215X – 15” cutting length
P218X – 18” cutting length MADE IN USA
P218X PARTS LIST
P215X PARTS LISTP212X PARTS LIST
Literature Part No. M-S027084
Rev.4 2/4/13
https://www.supplychimp.com/

Key Components
A – Hand Grip (note model P218X has a different style grip and latch)
B – Blade Arm
C – PolyBoard Base
D – Alignment Ruler
E – Finger Guard
F – Paper Guide Ruler
Assembly Instructions (for models P212X and P215X only)
1. Place the trimmer on a flat surface
2. Hold the top of the blade arm (B) with one hand, being careful not
to touch the blade, and the hand grip (A) with the other hand.
3. Slide the hand grip (A) onto the blade arm (B). The tab on the
blade arm (B) should snap firmly into the notch on the hand
grip (A). The trimmer is now ready for use.
perating Instructions
1. Place the trimmer on a flat, stable surface
2. Release the blade latch, which is located on the hand grip (A)
3. Lift the blade arm (B) up into cutting position
4. Using the rulers or the 1/2” grid, align the paper to the proper posi-
tion, pushing it up against the paper guide ruler (F).
CAUTION:
Keep hands and fingers behind the finger g ard (E)
at all times, away from the c tting blades
5. While holding the paper down with your left hand (to make sure
it stays in place), pull down the blade arm (B) to cut.
6. Always make sure that the blade arm is completely down and
locked when not in use.
Safety Information
• Always ensure that the blade arm is fully pushed down, and that
the blade latch is engaged, when not in use
• Never operate the trimmer without the finger guard in place
• Always keep clothing, jewelry, watches, and hair away from
the cutting blade
• Keep out of the reach of children
• Do not carry the trimmer by the hand grip or the blade arm
For Best Cutting Performance
Use Trim-Ease Blade Lubricant for a smoother cut and to help
preserve the life of the cutting blade. To order, please contact customer
service at the number below and ask for Trim-Ease Blade Lubricant,
part number MRS037046.
for information on office products,
including paper folding machines, punches, letter openers, catalog
racks, and computer keyboard drawers.
A
F
DE
B
A
B
Push onto arm until grip
“snaps” into position
C
https://www.supplychimp.com/