Prescitech RX12 User manual

Quick Installation Guide
Repeater Mode
RX12
Prescitech

Preparing
Below setup guide just for Repeater Mode by smart
phone & WPS method.
For AP (Access Point) Mode & troubleshoots, please
refer to USER MANUAL.
1. The router/AP works normal.
2. Download the APP “TenbayWiFi” by this link
http://www.prescitech.com/download/app
3. Plug the RX12 into an electrical outlet.
Smart Phone Setup Guide
1. Power on the RX12 next to your Router & wait the
LED turns to red/blue/green circle blink.
2. The WIFI of smartphone connects to “RX12”.
3. Once connected, open the APP “TenbayWiFi” click
“Search”.
4. Click the Model Name: RX12, fill in “admin” as the first
setup & login.
5. Setup a password of your RX12 admin page & give it
a name, you can also click “Next” directly as default
setting.
6. Choose “Repeater Mode”, then click “Next”.
7. After finish “Scanning…”, choose your target router,
and fill in the router’s password on “Target WiFi
Password”, click “Next”.

8. Get the summary of your setting of RX12, then Click
“Save”. Wait for around 2 minutes for the RX12 reboot
itself.
WPS Setup Guide
1. Power on the RX12 next to your router.
2. Press the WPS button of the front panel on RX12
around 6 seconds.
3. Once release, the RX12 WPS light starts blinking
green, press the WPS of your router within 2 minutes.
4. After connected successful, the SSID of RX12 will be
changed into “YourTargetRouter_EXT2.4G” &
“YourTargetRouter_EXT5G”. You can connect the
RX12 by using the same password with your router.
Note: Once setup successful, the WLAN LEDs would
change into Lit Blue.

US COST FREE Tech Support:
(PST Mon-Sun 06:00-24:00)
V1.0
800-213-1134
E-Mail:[email protected]
Website: www.prescitech.com