Primal Mac Daddy PVLS-601 Instruction Manual

N
H
W
X
J
FF
AA
DD
BB
D
Z
V
Y
Y
U
• Always Wear a Safety Harness with this Product
• Practice Using at Ground Level
• Weight Limit: 300 lbs.
• Tree Size: 9”-18” diameter
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
2019
©2019 (rev. 1/19)
Mac Daddy 22’ Xtra Wide
Deluxe Ladderstand
MODEL: PVLS-601
Instruction and Safety Manual
Every year serious injury or death can occur from hunting related accidents. To ensure your safety, please completely read and follow this safety manual
and all warning labels before assembling, installing or utilizing this product.
Do not use this product before fully understanding all safety warnings and instructions. If you have questions, are unsure about any information or need additional
information concerning your product, contact our customer service department at 1-866-972-6168 or visit www.Primaltreestands.Com. Keep and
maintain this safety and instruction manual in a safe location for future reference.
W A R N I N G SAFETY MUST BE YOUR FIRST PRIORITY WITH THIS PRODUCT

Treestand Safety Warnings
Please read the following instruction manual and warnings labels completely before utilizing this product. Failure to understand and execute the
instructions and warnings may result in serious injury or death. In the event of an accident, have a plan for rescue, including the use of devices that may be
easily reached while suspended.
ALWAYS read and understand all warnings and instructions. Watch the enclosed DVD in it’s entirety before doing anything with this product including
assembly, installation etc. before each use of this product. Failure to read and understand all warnings and instructions and DVD material may result in
serious injury or death. Contact a Customer Service Representative with any questions you may have.
NEVER exceed total weight limit of 300 lbs. DO NOT use if your combined weight with all of your hunting gear and any accessories exceeds 300 lbs. Use
of tree stand over the weight limit may result in serious injury or death.
DO NOT use this tree stand while under the influence of alcohol, medication or any illegal substances. Use of tree stand while under the influence of any
of these substances may result in serious injury or death.
NEVER use this treestand during inclement weather. DO NOT use tree stand during thunderstorms, snowstorms, hurricanes, tornadoes or any other
weather conditions that include (but not limited to) lightning, icy conditions, or high winds that could create slippery or dangerous situations. End your hunt
and return to the ground if inclement weather conditions arise.
NEVER use treestand If you are feeling ill, nauseous, dizzy or if you have a prior condition that could cause a problem. i.e., heart condition, joints that
lock-up spinal fusions, etc., or if you are not well rested and alert. Physical ailments can reduce your ability to safely install, utilize, and remove your
treestand. Please consult a physician prior to use.
NEVER use this tree stand if you have a history of health problems such as (but not limited to) heart problems, back problems, high blood pressure,
impaired vision, equilibrium impairments, are afraid of heights, have been advised by a doctor or physician not to climb. If you are not physically fit, well
rested, and alert, or if you have any other physical or mental condition that would impair your ability to properly use this treestand.
NEVER use this tree stand on a tree that is dead, leaning, diseased, loose barked or on a utility pole as the tree may fall, break, or uproot and may result
in serious injury or death. NEVER rely on a branch for support.
NEVER jump or bounce on the treestand’s platform or ladder sections to seat it to the tree. Instead, step firmly on the first rung of the bottom ladder
section to set the ladder into the ground before proceeding to climb the ladder.
NEVER transport any of your equipment with yourself while ascending or descending the tree. You will need to have two hands free during ascending and
descending for safety. Use a haul line to pull up your firearm (unloaded, chamber opened with safety lock engaged, barrel facing towards the ground),
bows, arrows, knives or any other equipment to your tree stand once you have reached your desired hunting height. ONLY pull up hunting equipment after
the tree stand has been secured to the tree and after you and your harness have been secured to the tree. Prior to descending, lower your equipment on
the opposite side of the tree from which you are climbing. Make sure that the unloaded firearm’s safety lock is engaged and the gun barrel is pointing
towards the ground.
ALWAYS hunt with a plan and a buddy. Before you leave home, let others know your exact location, when you plan to return and who is with you.
ALWAYS carry emergency signal devices such as a cell phone, walkie-talkie, whistle, signal flare, PLD (personal location device) and flashlight with you at
all times and within reach even while you are suspended in your harness. Watch for changing weather conditions. In the event of an accident, remain calm
and seek help immediately.
ALWAYS inspect the tree stand and the Fall Arrest System (FAS) (Harness) for signs of wear or damage BEFORE each use. Also inspect to ensure that
nuts and bolts are secure. Pay special attention to the harness and straps, guaranteeing that nothing has been frayed or severed. Destroy all products that
cannot be repaired by the manufacturer. Contact a Customer Service Representative for replacement parts. The Fall Arrest System MUST be discarded
and replaced after a fall has occurred.
DO NOT ATTACH YOUR FULL BODY HARNESS TO YOUR TREESTAND.
NEVER modify your treestand in any way by making repairs, replacing parts, or altering adding or attaching anything to it except if explicitly authorized in
writing by the manufacturer. Improper installation or adjustment may cause serious injury or death. Remove all contents from box. Inspect for any
damaged or missing parts. If any parts are missing or damaged, you must only use certified replacement parts. Using any other replacement parts will
void product warranty. THERE ARE NO EXTRA PARTS. All parts MUST be used to ensure the safety of you and your stand. If you think parts are missing
or damaged, STOP IMMEDIATELY and contact our Customer Service Department. Using the tree stand with missing or damaged parts may result in
serious injury or death. DO NOT return this product to the retailer. Contact a Customer Service Representative if you have any missing, damaged or extra
parts.
ALWAYS keep instructions (written and video) in a safe place and review before each use. It is the responsibility of the treestand owner to furnish the
complete instructions to anyone who borrows or purchases the treestand from you. A safe treestand hunting video has been included. View it in it’s entirety
prior to using this product.
NEVER use this treestand for any use other than hunting. Our treestands are designed for hunters to wear a Full Body Harness. If you are not completely
comfortable and confident with your ability to safely install, ascend, hunt and descend using a Full Body Safety Harness and this treestand, DO NOT
PROCEED.
NEVER use this treestand for trimming trees.
NEVER fall asleep in your stand as you may fall out resulting in serious injury or death.
ALWAYS be sure to re-tighten all bolts BEFORE each new use of treestand.
ALWAYS have a minimum of three people present when installing or removing this treestand.
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
2019
©2019 (rev. 1/19)
Customer Service Department 1-866-972-6168
www.primaltreestands.com

Treestand Safety Warnings
NEVER remove any safety warning stickers
from this product.
NEVER adjust your stand while in use. Practice the attachment of this treestand at ground level before using in a hunting environment. ALWAYS ensure
that you and your treestand are safely secured to a healthy tree. Your tree stand MUST be attached tightly to the tree and secured in place. If the stand is
not secure, it may shift while in use, resulting in serious injury or death.
The Installation Cross Straps and Truss Assembly System MUST be properly installed before each use of the treestand.
ALWAYS inspect every ladder section connection every time you use the stand before you leave the ground. If ladder sections are separating, with the help
of at least two other people, lower the stand to the ground, make adjustments, and reinstall.
ALWAYS check the ground below the tree stand to make sure it is firm and level. Sloping ground or uneven terrain (one side of a rock or root) can cause
your tree stand to tilt or shift.
ALWAYS maintain three points of contact when climbing the tree stand. (Two feet and one hand or one foot and two hands.)
ALWAYS lean forward as you climb and attach your harness to the tree before securing the platform to the tree and stepping onto the platform.
DO NOT leave your treestand outside since weather or animals may cause damage. Tree growth can also cause stress and damage straps and buckles. It
must be stored inside, free of moisture, when not in use.
NEVER wear jewelry or loose fitting clothing, which can cause hazardous conditions. Clothing may be caught in your equipment and cause you to fall. You
must always wear non-slip or rubber boots. Shoelaces must be tucked into your boots. Rings and necklaces MUST NOT be worn.
NEVER use this treestand with a second person. The treestand is designed for use by ONE person.
NEVER let children use this treestand without adult supervision. This treestand is not a toy. No one under the age of 18 should attempt to use this product
without direct adult supervision.
DO NOT use tree stand if any nuts or bolts or parts are loose, bent, or crooked.
ALWAYS know your physical limitations. Don’t take chances. If you start thinking about how high you are, don’t go any higher. Instead, choose a minimum
height that will allow for safe, effective and comfortable hunting.
ALWAYS lean forward towards the tree as you climb and attach your harness to the tree BEFORE securing the platform to the tree and stepping onto the
platform. NEVER lean out from the treestand for any reason.
ALWAYS wear a Fall Arrest System (FAS) (Harness) consisting of a full body safety harness after leaving the ground. A Full Body Harness that meets
TMA/ASTM standards MUST always be connected to yourself and the tree during ascending, hunting and descending. Single safety belts and chest
harnesses are no longer allowed and should NEVER be used. If you are not wearing a Full Body Harness properly attached to the tree, that is protecting
you from a fall, DO NOT leave the ground. Failure to wear your Full Body Harness may result in serious injury or death. Be aware that falls can occur at
anytime after leaving the ground.
ALWAYS read and understand the manufacturer’s Warnings, expiration date (if applicable) and instructions on how to use and how to properly adjust the
harness. Practice the use of a full body safety harness at ground level in the presence of a responsible adult to experience the feeling of hanging
suspended before using in a hunting environment. Failure to follow harness instructions may result in not being able to return to the stand and being
suspended in a harness after a fall, or serious injury or possibly death. If the hunting location is unknown by anyone and communication efforts are
unsuccessful, you MUST have a personal plan for rescue/escape because prolonged suspension in a harness may be fatal. It is important to exercise the
legs by pushing against the tree or doing other forms of continuous leg exercises to avoid blood pooling while being suspended. Hunters with varying
degrees of physical fitness may require different plans to recover/escape the effects of prolonged suspension. Have a personal plan and practice it in the
presence of a responsible adult before leaving the ground. No one escape/rescue plan will work for every hunter on every tree in every circumstance. Only
you can determine the best recovery/escape plan for your situation before leaving the ground.
ALWAYS have a suspension relief device on your person and readily accessible while using a harness. These devices allow the user to relieve the load on
the lower extremities if suspended in a harness and help maintain circulation in the legs, mitigate suspension trauma (blood pooling) or allow descent to the
ground. Several optional products/systems are available that offer self-recovery or self-extraction from a fall when suspended in a harness. Some systems
automatically descend the user while others allow user control. One of these products/systems can be considered for use as an additional safety precaution
against prolonged suspension and suspension trauma, Be sure to follow the manufacturers’ instructions on the safe use of these products/systems.
Hunt from the ground when self-recovery escape is absent. There is time to make a correct decision on what action to take if a fall occurs while wearing a
full body harness. It is important to remember “DO NOT PANIC.” Remain calm and implement your practiced rescue, relief and recovery plan.
NEVER allow the tether strap to get under your chin or around our neck. The length of the harness tether MUST be minimized at all times. It should be
adjusted so that it is above the head with no slack (snug) in the sitting position and you should have the minimum amount of slack possible when climbing.
W A R N I N G
DO NOT use this ladderstand under the influence of alcohol,
drugs, or medication. Using ladderstand under the influence
of alcohol, drugs, or medication may result in serious injury or
death.
NEVER use ladderstand if you have dizzy spells, a heart
problem, are afraid of heights, have been advised by a doctor
or other health care provider not to climb, or have any
condition that would impair your ability to climb up or down or
use treestand as it could result in serious injury or death.
NEVER remove or deface ladderstand warning labels.
Replacement labels can be obtained from the address below.
NEVER make any alterations or modifications to the ladder
stand. Doing so may result in serious injury or death and will
void all warranties.
NEVER stand on treestand seat or armrests. Standing on any
of these parts may cause the treestand to break or fail resulting
in serious injury or death.
NEVER use treestand in a tree that is dead, diseased, leaning,
or on wet or uneven ground as the tree may fall, break, or
uproot and may result in serious injury or death.
NEVER use ladderstand during inclement weather. DO NOT
use treestand during thunderstorms or any other weather
conditions including (but not limited to) lightning, freezing rain,
high wind that could create slippery or dangerous conditions.
DO NOT use this ladderstand without reading and following all
warnings and instructions before each use. Failure to do so
may result in serious injury or death.
DO NOT exceed the ladderstand's 300 lbs. weight limit, which
includes your body weight as well as the weight of your clothes
and gear. Exceeding the ladderstand's weight limit may cause
the treestand to break or fail resulting in serious injury or death.
ALWAYS wear a Full Body Harness while using this ladder
stand. Failure to wear a full body harness while using
this ladderstand may result in serious injury or death.
ALWAYS inspect your ladderstand before each use. DO NOT
use if parts are missing, worn, or damaged.
Safety must be your first priority
during the use of this product.
2019
©2019 (rev. 1/19)
Customer Service Department 1-866-972-6168
www.primaltreestands.com

• ALWAYS thoroughly inspect the tree before installing your product. DO NOT install your TREE/LADDER STAND onto any dead or unsafe tree, telephone
or
utility pole, structural column, or man-made structure. Doing so may result in serious injury or death.
• ALWAYS select the proper tree for use with your TREE/LADDER STAND. Select a live straight tree that fits within size limits recommended (minimum tree
diameter must be no less than 9 inches and maximum of 18 inches.). DO NOT rely on a branch for support.
• DO NOT select a tree in the dark or choose a tree in close proximity to a fence. You must not have any stumps or rocks beneath your tree.
• NEVER use TREE/LADDER STAND on a tree that is dead, diseased , leaning or on wet and uneven ground as the tree may fall, break or uproot.
• Your tree must not be wet, icy or slippery or on wet, swampy, or loose ground that allows the tree to be unstable. Check the ground under TREE/LADDER
STAND to ensure it is firm and level.
• Be sure you have a level stand platform. Your tree must not lean or have any irregular shape.
• Tree must not have any loose or scaly bark or excessive vines, nails, screws, or any other sharp objects protruding that may sever webbing on product. Any
surrounding trees must not lean or have dead limbs that may fall onto you or your product.
• NEVER HURRY!! HURRYING CAUSES ACCIDENTS!! While climbing a TREE/LADDER STAND, make slow, even movements no more than ten to twelve
inches at a time. Make sure you have proper contact with tree and/or TREE/LADDER STAND every time you move. On ladder tree stand, ALWAYS
maintain three points of contact with each step up the ladder and ALWAYS lean forward as you climb.
Several treestands are equipped with a footrest, armrests and/or shooting rail. Neither the footrest, armrests nor the shooting rail have been
designed to support a user’s weight. Under NO circumstances should you place more than fifteen (15) pounds of weight on these structures. Doing
so will put the user in serious risk of injury or death.
Choosing A Safe Tree
Proper Care And Maintenance:
• Inspection for defects (damage, rot, corrosion, cracks, freezing, excessive heat, etc.) before every use is required. Do not use if damage is
detected or suspected.
• We recommend replacing all hardware/cables/nuts/bolts/clips on your tree stand every two (2) years or sooner if inspection finds it necessary. Use
only Primal Vantage approved replacement straps and parts. Use of any other straps or parts, will be viewed as a modification to the product. Any
modification will void the warranties and relieve Primal Vantage from all liabilities. Failure to follow these instructions may result in serious injury or
death.
• DO NOT overtighten the hardware. DO NOT use a socket wrench. This can lead to structural damage and may negatively affect the performance
of your stand. Failure to follow these instructions may result in serious injury or death.
• All photos are taken from the front view unless otherwise noted.
• In most cases, bolts come with two nylon washers. One washer will be placed against the bolt head the other washer will be placed against the nut.
2019
©2019 (rev. 1/19)
Customer Service Department 1-866-972-6168
www.primaltreestands.com

CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
1 Upper Middle Ladder Section...Part # PUML-601
1 Lower Middle Ladder Section...Part # PUBL-601
1 Bottom Ladder Section.............Part # PBL-601
2 Arm Rests.................................Part # PAR-601
2 Foot Platforms (Left & Right)....Part # PFP-601
2 Handle Rails..............................Part # PHR-601
1 Seat Assembly............. .............Part # PSA-601
2 Ladder Yokes............................Part # PLY-601
1 Left Ladder Jaw........................ Part # PLLJ-601
1 Tree Connection Brace.............Part # PTCB-601
1 Right Ladder Jaw......................Part # PRLJ-601
2 Platform Supports.....................Part # PPS-601
2 Back Rest Supports..................Part # PBS-601
1 Foot Rest.................................. Part # PFR-601
1 Harness.................................... Part # 2019
= NOT PICTURED
IN THIS MANUAL
PARTS LIST
Slide Brackets (2)
Q
Tools Required
Adjustable Wrench
A
Handle Rails (2)
F
Tree Brace (1)
J
S
Back Rest Support (2)
M
Left Ladder Jaw (1)
K
Right Ladder Jaw (1)
L
2 Slide Brackets...........................Part # PSB-100
2 Shooting Rail Arms.................... Part # PSRA-601
2 Adjustment Knobs.....................Part # PAK-100
1 Shooting Rail..............................Part # PSR-601
WWW.PRIMALTREESTANDS.COM
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Top Ladder
Section (1)
A
Upper Middle
Ladder Section
(1)
Lower Middle
Ladder Section
(1)
B C
Bottom Ladder
Section (1)
D
Foot Rest (1)
O
Foot Platform (2)
E
Seat Assembly (1)
G
Arm Rests (2)
P
Platform Support (2)
N
Shooting Rail Arms (2)
R
Ladder Yoke (2)
H
Adjustment Knobs (2)
S
Shooting Rail (1)
T
1 Top Ladder Section...................Part # PTL-601
Left Right
T
2019
©2019 (rev. 1/19)
• Always Wear a Safety Harness with this Product
• Practice Using at Ground Level
• Weight Limit: 300 lbs.
• Tree Size: 9”-18” diameter
Mac Daddy 22’ Xtra Wide
Deluxe Ladderstand
MODEL: PVLS-601

CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
1 Vertical Jaw Assembly Strap Part # PVJS-601
1 Ratchet Strap................................Part # PRS-100
2 Arm Rest Cover Pads...................Part # PAC-100
2 Installation Straps.........................Part # PIS-100
6 M6 Quickclips...............................Part # 1615
1 Truss Cable..................................Part # PTC-601
1 Jaw Assembly Tree Buckle...........Part # PTB-601
1 Jaw Assembly Ratchet Strap........Part # PRS-200
PARTS LIST Truss Bar (1)
U
Tools Required
Adjustable Wrench
Ratchet
Strap (1)
AA
Platform Truss Loop
FF
M6 Quickclips (6)
EE
Jaw Assembly Tree
Buckle (1)
BB
Z
Vertical Jaw
Assembly Strap (1)
Y
Installation Straps (2)
Truss Cable (1)
DD
Jaw Assembly
Ratchet Strap (1)
CC
1 Horizontal Jaw Assembly Strap Part # PHJS-601
1 Shooting Rail Cover Pad..............Part # PSRC-601
1 Truss Bar...................................... Part # PTA-100
HARDWARE BOX P/N 601H
WWW.PRIMALTREESTANDS.COM
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Shooting Rail Cover Pad (1)
W
Horizontal Jaw Assembly
Strap (1)
V
Armrest Cover Pads (2)
X
DD
EE
1 Platform Truss Loop.....................Part # PTL-601 FF
2019
©2019 (rev. 1/19)
2 M8x90mm Bolts w/ spacers........Part # 1291
2 M6x25mm Bolts..........................Part # 1025
2 M8x70mm Bolts w/3 washers.....Part # 1273
2 M8x60mm Bolts..........................Part # 1260
4 M6x30mm Bolts..........................Part # 1030
9 M8x55mm Bolts..........................Part # 1255
3 M8x45mm Bolts..........................Part # 1245
2 M6x40mm Bolts w/ spacers........Part # 1041
2 M6x70mm Bolts w/ spacers........Part # 1071
2 M6x45mm Bolts..........................Part # 1045
1 M6x35mm Bolts..........................Part # 1035
• Always Wear a Safety Harness with this Product
• Practice Using at Ground Level
• Weight Limit: 300 lbs.
• Tree Size: 9”-18” diameter
Mac Daddy 22’ Xtra Wide
Deluxe Ladderstand
MODEL: PVLS-601

Slide Handle Rails onto right and left
front ends of Tree Brace assembly.
NOTE:Do not secure Handle Rails
with bolts at this step.
ALL PHOTOS TAKEN FROM FRONT VIEW UNLESS OTHERWISE NOTED
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Assembly Instructions Page 1 Model: PVLS-601
Mac Daddy 22’ Xtra Wide Deluxe Ladderstand
Remove all contents from packaging and make sure all parts are present before attempting to assemble.
Tighten all bolt connections by hand first and then when fully assembled, go back and tighten with a wrench.
12
3
center spacers located here
SIDE VIEW
4
2
Carefully tilt Handle Rail / Tree Brace / Ladder
Jaw assembly upward so that the Ladder
Jaws and are towards the ground and
the ends of Ladder Yokes are held upward.
Slide the top ends of Top Ladder Section
into the downward facing ends of Ladder
Yokes . Attach using 2-M6x30mm bolts
NOTE:Continue to leave Handle Rails
un-secured to the Tree Brace .
4
Attach Left Ladder
Jaw and Right
Ladder Jaw to Tree
Brace using
2-M8x90mm bolts
with spacers on
each side.
1
Attach left and right Ladder
Yokes onto each handle
rail using
2-M6x30mm bolts
3
WWW.PRIMALTREESTANDS.COM
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
K
K
K
L
L
L
K L H
HH
H
J
A
A
J
J
H
F
J
F
F
HH
F
J
JL
K
2019
©2019 (rev. 1/19)

7
With the Handle Rails/Tree Brace/Ladder Jaw
assembly in the same position from Step 3,
secure Backrest Supports through right
and left Handle Rails and Tree Brace
(already slid inside of Handle Rail tubes) using
2-M8x60mm bolts . NOTE:There are 2
sets of holes in the Backrest Supports .
Use the lower holes to attach the Handle
Rails . The top holes will be used to
attach the Seat
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Assembly Instructions Page 2
7
5
WWW.PRIMALTREESTANDS.COM
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
E E
M M
M
M
F
F
J
FF
Lay the two Foot Platforms side by side
(grate side down). Place the Platform Truss
Loop over the front set of holes on the front
side of the platform. It should be at a 90° angle
from the platform so it points to the ground.
Fasten the Foot Platforms together using
3-M8x55mm bolts .
5
E
FF
55
FRONT
Model: PVLS-601
Mac Daddy 22’ Xtra Wide Deluxe Ladderstand
2019
©2019 (rev. 1/19)
55
55
Couple together Left and Right Backrest
Support and secure them together using
1-M6x35mm bolt . Attach Backrest
Support to the rear of Foot Platform
using 2-M8x55mm bolts . NOTE:The top
of Left and Right Backrest supports should
bend AWAY from foot platform as shown.
6
Attach Foot Platform and Foot Rest to
Ladder Yokes using 2-M8x70mm bolts
with 3 washers . NOTE: Center washer
should go in between Foot Platform
and Foot Rest on both sides.
8
6
8
E
H
H
H
E
E
E
E
M
O
O
O
M
M
M
55
55
35
35

Loosely screw each Adjustment Knob into each Slide
Bracket . Then slip Slide Bracket Assembly over each
Arm Rest in the positioning shown above. Slide each
assembly passed the holes at the bottoms of each Arm
Rest and firmly tighten each Adjustment Knob .
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
With each Slide Bracket and Adjustment Knob
facing outward and forward (as shown above), attach the
front of each right and left Armrest assembly to the
front most screw hole of each right and left Handle Rail
assembly using 2-M6x45mm bolts .
Assembly Instructions Page 3
11
LEFT RIGHT
spacer
located
here
spacer
located
here
12 13
12 13
WWW.PRIMALTREESTANDS.COM
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
M
MM
F
F
G
G
G G
M
M
M
M
M
S
S
S
Q
P
P
P
P
PP
P
Q
SS
S
S
M M
M
M
109
Slide right and left sleeves of Seat Assembly
over Left and Right Back Support .
Rest the base of the seat pad on top of right
and left Handle Rails .
M
F
G
10
Attach Platform Support Bars to the side
of the Foot Platform and to the Top Ladder
Section using 4-M8 x 55mm bolts .
E
E
A
A
N
N
N
9
Secure right and left hinged base of Seat Assembly to Left and Right Backrest Support using 2-M6x40mm bolts with
spacers . See diagram for correct placement of washers and spacers.
11
G M
Model: PVLS-601
Mac Daddy 22’ Xtra Wide Deluxe Ladderstand
2019
©2019 (rev. 1/19)
55
55
55
55

CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Assembly Instructions Page 4
WWW.PRIMALTREESTANDS.COM
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Position the Shooting Rail assembly so that it rests
on top of the right/left Slide Brackets and
Adjustment Knobs . Secure right/left Shooting
Rail Arms to the outside of the Arm Rests ,
and into right/left Handle Rails using
2-M6x70mm bolts with spacers .
NOTE: See Shooting Rail Assembly Diagram
for correct placement of spacers.
Attach the Shooting Rail Cover Pad to
Shooting Rail. Attach each Arm Rest Cover
Pad to each right/left Arm Rest.
14
Center Spacers located here
16
15
15
Attach Shooting Rail to right/left Shooting
Rail Arms using 2-M6x25mm bolts .
14
16
T
T
R
R
R
R
W
W
X
X
X
P
RFP
S
15
Shooting Rail Assembly Diagram
Model: PVLS-601
Mac Daddy 22’ Xtra Wide Deluxe Ladderstand
2019
©2019 (rev. 1/19)

CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Assembly Instructions Page 5
WWW.PRIMALTREESTANDS.COM
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Model: PVLS-601
Mac Daddy 22’ Xtra Wide Deluxe Ladderstand
2019
©2019 (rev. 1/19)
19a: Attach Ratchet Straps on either outer side of the Tree Brace
(See Ratchet Strap Instructions for correct weaving).
Pass Horizontal Jaw Assembly Strap through the
top loop of Vertical Jaw Assembly Strap (as shown
above).
17
17
18
19b
BOTTOM
strap passes
through these
metal loops
Carefully tilt ladder stand assembly forward so that the
bottom is facing forward and the rear is facing upward.
With Horizontal Jaw Assembly Strap passed through
the top loop of Vertical Jaw Assembly Strap , connect
the two right/left ends of the Horizontal Jaw Assembly
Strap to Left Ladder Jaw and Right Ladder Jaw
using 2-M8x45mm bolts . Check to make sure that
Vertical Jaw Assembly Strap is passing through the
metal loops on tree brace and the bottom of the Foot
Platform Assembly (as shown right).
18
19
19a
BOTTOM BOTTOM BOTTOM
V
VJ
J
J
J
J
Y
Y
J
V
V
V
Z
Z
Z
Z
K
K
K
K
L
L
L
Y
Y
AA AA
AA
AA
19a: Attach Ratchet Straps on either outer side
of the Tree Brace (See Ratchet Strap
Instructions for correct weaving).
19
J
AA
AA
L
Z

23
This metal hook
faces upward
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Ladder Assembly Instructions
Slide Truss Arm into truss bracket (located on the
top rung of Lower Middle Ladder Section .
Secure using 1-M8x45mm bolt .
Slide the top of Bottom Ladder
Section into the bottom of Lower
Middle Ladder Section . Lining all
holes up, Insert M6-Quickclip
completely through the holes of both
ladder sections and out the other side.
Close the quickclips to secure the
ladder sections together. Repeat this
process on the opposite rail.
Slide the top of Upper Middle Ladder
Section into the bottom of Top
Ladder Section . Lining all
holes up, insert M6-Quickclip
completely through the holes of both
ladder sections and out the other side.
Close the quickclips to secure the
ladder sections together. Repeat this
process on the opposite rail.
23
A
20 22
20
MAKE SURE ALL BOLTS ARE
TIGHT BEFORE PROCEED-
ING TO TRUSS ASSEMBLY
W A R N I N G
WWW.PRIMALTREESTANDS.COM
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
U
C
U
D
D
EE
EE EE
22
Slide the top of Lower Middle Ladder
Section into the bottom of Upper
Middle Ladder Section . Lining all
holes up, Insert M6-Quickclip
completely through the holes of both
ladder sections and out the other side.
Close the quickclips to secure the
ladder sections together. Repeat this
process on the opposite rail.
21
EE
21
EE EE
Model: PVLS-601
Mac Daddy 22’ Xtra Wide Deluxe Ladderstand
2019
©2019 (rev. 1/19)

Carefully lay fully assembled Ladder
Stand front ladder side down so that the
tree attachment side is facing upward.
Attach the hooked side of Truss Cable
without the tension adjuster to the
eyelet hole welded on the bottom front
of the foot platform assembly (as shown
left) .
NOTE: Top hook should ALWAYS face
inward, away from the front of ladder
(as shown left).
Attach the hooked side of Truss Cable with the tension
adjuster to the eyelet hole welded on the bottom rung of
Bottom Ladder Section .
NOTE: It may be necessary to pre-tension the cable by
tightening the tension adjuster several turns clockwise
before placing it on the Truss Bar .
Stand in the middle of the ladder, pull up on the Truss Cable and place it
onto the Y-shaped end of the Truss Bar . Tighten the cable so that there
is enough tension to create a slight bow in the Ladder Structure (as shown above).
NOTE: It should take minimal effort to lift the Truss Cable onto the Truss Bar, if
truss cable is not easy to lift, STOP immediately, loosen the truss adjuster and
repeat the process.
1
3
1
2
3
2
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Truss Assembly Instructions
NOTE:Drawings are for illustration purposes only and may not depict actual product.
E
E
WWW.PRIMALTREESTANDS.COM
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
U
U
U
U
D
D
D
DD
DD
DD
DD
DD
DD
DD
DD
Model: PVLS-601
Mac Daddy 22’ Xtra Wide Deluxe Ladderstand
2019
©2019 (rev. 1/19)

CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Insert end of strap through the loop.
2
Place looped end of strap
under platform.
Slot 2 Slot 1
1
Place loose end of strap with clip,
under the top rung of the bottom
ladder section.
4
Insert the strap through Slot 1 on
the clip.
5
Insert the strap through the Slot 2
with the teeth.
6
Pull strap to tighten.
7
Slide the buckles out to the sides
to create tension on the straps.
8
Pull to tighten. Continue with these
steps to install the other strap on
the other side of the platform.
3
1
6
7 8
4 5
2 3
Installation Strap Instructions
WWW.PRIMALTREESTANDS.COM
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Model: PVLS-601
Mac Daddy 22’ Xtra Wide Deluxe Ladderstand
2019
©2019 (rev. 1/19)

Ratchet Strap Instructions
Place looped end of Ratchet
under platform.
1
Place looped end of strap
under platform.
4
Insert strap through loop.
5
Insert Ratchet through loop.
2
Pull to tighten.
3
Pull to tighten.
6
YOU MUST READ AND FOLLOW ALL
INSTRUCTIONS PRIOR TO INSTALLATION
1
4 5 6
2 3
12 3 4 5 6
Open ratchet handle
flat and insert end of
strap through opening
Pull Strap through
opening Insert end of strap
through slot in ratchet
wheel
Ratchet handle back
and forth to tighten
strap
To release tension, push
spring loaded retaining lock
and simultaneously pull
on strap
After strap is tight,
close handle to
the locked position
DETAILED RATCHET STRAP INSTRUCTIONS
2019
©2019 (rev. 1/19)
Customer Service Department 1-866-972-6168
www.primaltreestands.com
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Model: PVLS-601
Mac Daddy 22’ Xtra Wide Deluxe Ladderstand

CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Truss Configuration Instructions
ABC
If ladder is perfectly straight or
bowed toward tree, TRUSS IS
TOO LOOSE. Take down the
ladder, tighten the turnbuckle
and re-set the stand until
correct.
A
This is correct. Note that there
is a slight outward arc to the
ladder.
B
Do not over-torque truss system.
If ladder is bowed too far, it will
force users to climb at an
uncomfortable angle and could
also result in ladder failure. If
ladder appears to have an
extreme outward arc, take down
the stand, loosen turnbuckle and
re-set the stand until correct.
C
INCORRECT
CORRECT
INCORRECT
TRUSS IS TOO LOOSE TRUSS IS TOO TIGHT
NOTE: Drawings are for illustration purposes only and may not depict actual product.
WWW.PRIMALTREESTANDS.COM
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Model: PVLS-601
Mac Daddy 22’ Xtra Wide Deluxe Ladderstand
2019
©2019 (rev. 1/19)

CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Installation Instructions Page 1
1
3 4 5
2
Position bottom of stand 4-5 feet from base of tree
NOTE: Make sure that Ladder Jaws and are
in their open most position.
1 One person will stand at the base of ladder with
his/her foot on the bottom rung while holding
installation straps. This will prevent tree stand from
sliding. Two people will stand at opposite ends of
tree stand, facing Platform and slowly walk tree
stand upward using rungs of ladder.
2
Move base of ladder toward or
away from the tree slightly in
order to make Platform as
Parallel to the ground as
possible.
Apply your full weight to the first
step so it settles into the ground.
4
As tree stand is being raised, the
person holding Installation Straps will
pull toward themselves to take up slack.
It will steady and ease the weight of
stand on the other two people. Continue
walking stand upward, until Tree
Contact is resting against the tree.
W A R N I N GW A R N I N G
Truss Assembly and Installation Straps MUST be secured
prior climbing the Ladder Stand. Failure to comply may
result in serious injury or death.
DO NOT climb ladder without Truss Assembly or
Installation Straps installed. Serious injury or
death may occur if stabilizer bar is not installed.
3
Cross Installation Straps behind tree.
Attach to the top rung of the bottom
ladder section. Pull to tighten the
straps against the tree.
(See Installation Strap Instructions).
5
90º
90º
NOTE: Drawings are for illustration purposes only and may not depict actual product.
WWW.PRIMALTREESTANDS.COM
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
K L
Y
YY
Model: PVLS-601
Mac Daddy 22’ Xtra Wide Deluxe Ladderstand
2019
©2019 (rev. 1/19)

DD
BB
D
Z
Y
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Installation Instructions Page 2
NOTE: Ladder should arc slightly
outward even after Jaw Assembly
Strap Webbing is fully tightened
WWW.PRIMALTREESTANDS.COM
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Model: PVLS-601
Mac Daddy 22’ Xtra Wide Deluxe Ladderstand
2019
©2019 (rev. 1/19)
NOTE: The Ladder Jaws are designed to wrap around
a tree trunk when Vertical Jaw Assembly Strap is
tightened (shown left).
Before engaging the Ladder Jaw Mechanism:
1) Check that the Ladder stand is properly installed on
correct sized tree. If the ladder jaws cannot close
on the tree trunk (pictured top left), the tree is too
large for safe installation.
2) Check that the installation straps are correctly
wrapped around the tree base and tightly secured
3) The Truss Mechanism is properly tensioned.
4) The ladder base is correctly and safely secured onto
level ground.
Check to make sure the Vertical Jaw
Assembly Strap is not caught, tangled
or snagged. Make sure the strap falls flat
and straight from the foot platform.
Carefully loop the Vertical Jaw Assembly
Strap through either the right or left metal
hooks on the Truss Bar (as shown left).
Lightly pull on Vertical Jaw Assembly strap
to and check to make sure that both
ladder jaws close in on the tree trunk.
Loop Jaw Assembly Tree Buckle
through Jaw Assembly Ratchet Strap
.
With the Jaw Assembly Ratchet Strap
attached, wrap the Jaw Assembly
Tree Buckle around tree trunk at
a lower diagonal point from the Truss
Bar (as shown right). Feed Jaw
Assembly Tree Buckle Webbing
though the spring loaded cam buckle
and firmly tighten around tree trunk.
Position Jaw Assembly Ratchet Strap
so that it faces the ladder. Feed
Vertical Jaw Assembly Webbing
through ratchet strap and ratchet the
strap tight until the tension closes the
ladder jaws. DO NOT overtighten.
See “Ratchet Strap Instruction” for
correct operation of the Ratchet Strap.
6
7
8
Z
U
U
Z
Z
Z
Y
Z
Z
U
DD

SINGLE VANTAGE 17’ DELUXE LADDERSTAND
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
12 3 4 5 6
9
Open ratchet handle
flat and insert end of
strap through opening
Pull Strap through
opening Insert end of strap
through slot in ratchet
wheel
Ratchet handle back
and forth to tighten
strap
To release tension, push
spring loaded retaining lock
and simultaneously pull
on strap
After strap is tight,
close handle to
the locked position
DO NOT sit on the seat platform until the ratchet has been secured.
W A R N I N G
Installation Straps, Truss and Ladder Jaw Assembly MUST
be secured and engaged prior climbing the Ladder Stand.
Failure to comply may result in serious injury or death.
After the ladder stand has been secured to the tree
with:
1) The installation straps secured.
2) The truss cable correctly tensioned
3) The Ladder Jaw system fully connected/engaged.
4) The Ladder securely attached to the tree.
Continue to have two people hold the ladder, climb
cautiously up to the platform. Once you reach the
top, IMMEDIATELY ATTACH YOUR SAFETY HARNESS
TO THE TREE. Keep the tether strap above your head.
9
Before sitting down, IMMEDIATELY locate Ratchet Strap at the
tree brace, behind the seat backrest. Wrap the strap around the
back of the tree once, thread through the ratchet and tighten
(See side view: 10a and cross-section:10b).
(See Detailed Ratchet Instructions below for proper use).
10
DETAILED RATCHET STRAP INSTRUCTIONS
W A R N I N G
Installation Instructions Page 3
NOTE: Drawings are for illustration purposes only and may not depict actual product.
10a 10b
LADDER
STAND
TOP
WWW.PRIMALTREESTANDS.COM
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Y
AA
AA
AA
Model: PVLS-601
Mac Daddy 22’ Xtra Wide Deluxe Ladderstand
2019
©2019 (rev. 1/19)

DO NOT climb ladder without Stabilizer Bar or Installation
Straps installed. This MUST be correctly installed prior to
use. Serious injury or death may occur if Stabilizer Bar
and Installation Straps are not properly installed.
W A R N I N G
W A R N I N G
ALWAYS read and understand all warnings and instructions
before each use of this product. Failure to read and
understand all warnings and instructions may result in
serious injury or death.
NEVER exceed weight limit of 300 lbs. DO NOT use if your
combined weight with all your hunting gear and any
accessories exceeds 300 lbs. Use of tree stand over the
weight limit may result in serious injury or death.
ALWAYS inspect the tree stand for signs of wear or
damage BEFORE each use. Also inspect to ensure that
nuts and bolts are secure and straps are not frayed, worn,
or broken.
ALWAYS wear a Fall Arrest System (FAS) after leaving the
ground. If you are not wearing an FAS that meets ASTM
standards, DO NOT leave the ground. Failure to wear an
FAS may result in serious injury or death.
DO NOT use this tree stand while under the influence of
alcohol, medication, or illegal substances. Use of tree stand
while under the influence of any of these substances may
result in serious injury or death.
NEVER use this tree stand if you have a history of health problems
such as (but not limited to) heart problems, back problems,
impaired vision, equilibrium impairments are afraid of heights or
have been advised by a doctor not to do any strenuous activity. If
you are feeling ill, nauseous, or dizzy DO NOT use this tree stand
or If you are not physically fit, well rested and alert. Physical
ailments can reduce your ability to safely install, utilize and remove
your tree stand.
NEVER use this tree stand during inclement weather such as (but
not limited to) thunderstorms, snowstorms, hurricanes, icy
conditions, or high winds that could create slippery or dangerous
situations.
NEVER use this tree stand on a dead, leaning, loose barked tree or
on a utility pole as the tree may fall, break, or uproot and may result
in serious injury or death.
DO NOT modify or alter your tree stand.
NEVER leave the ground without checking every ladder
section connection to ensure they are firmly connected. If
ladder sections are separating, with the help of at least two
other people, remove the tree stand from the tree, tighten
all connections and reinstall on the tree.
NEVER remove or deface warning labels.
Installation Straps, Ratchet Straps, Quickclips,
Tiedown Ropes and Stabilizer Bars MUST be installed
and secured prior to climbing tree stand. Failure to
comply may result in serious injury or death.
Failure to follow all warnings listed below could result in serious injury or death.
Manufactured in the year 2019 Primal Vantage Company Inc. 2407 W. Euclid Ave., Littleton, CO 80120 1-866-972-6168