PRIMELED WEATHER PROOF Series User manual
Unit 2, 99-101 Western Ave Westmeadows VIC 3049
www.primeled.com.au
PrimeLED Australia
Warehouse / Showroom
LED WEATHER PROOF SERIES
PL-TP01 - 30/55/70/80W
INSTALLATION GUIDE
Important Safety Instructions
1. Turn off the main power supply prior to installation.
2. The Ceiling Light must be installed by a licensed electrial contractor or electrician.
3. Do not install the Ceiling Light in damp, wet and hot locations. Please ensure adequate ventilation.
4. For indoor use only.
Cleaning and Maintenance
Turn off the power supply. Clean the Ceiling Light with soft cloth using a mild liquid cleaner. Dry with a cloth.
// INSTALLATION DIAGRAM
RoHS
1 2
3 4
RECESSED
580mm
55mm
1. Drill 4 holes of 8mm diameter. 2. Install the bracket onto the ceiling.
3.Unscrew until a gap of 4mm is present.
The hook of the bracket will clip in here.
SCREW
4. Install the light and tighten the screw.
Unit 2, 99-101 Western Ave Westmeadows VIC 3049
www.primeled.com.au
PrimeLED Australia
Warehouse / Showroom
1 2
3 4
SUSPENDED
1. Drill 4 holes of 6.5mm diameter. 2. Install the bracket onto the ceiling.
3. Screw the suspension kit to both sides of the
lamp.
4. Install the light and adjust the suspension kit
wires.
604
Screw
This manual suits for next models
4
Table of contents
