Primera BravoPro autoprinter User manual

Quick Start
P/N 510920-011507
Automated Optical Disc
Duplication & Printing System
AUTOPRINTER
TM
Automated Optical Disc
Duplication & Printing System
© 2007 All rights reserved
Congratulations, you are now ready to start Printing discs!
•For Instructions on printing a disc using a PC refer to section 3 in the
User’s Manual.
•For Instructions on printing a disc using a Macintosh refer to section 4 in
the User’s Manual.
•For help with problems printing discs using a PC or Macintosh please visit
Primera's online Knowledgebase at www.primera.com/knowledgebase.html.
7Aligning the Cartridges
If you are using a PC the Installer will prompt
you to align the cartridge.
If you are using a Mac you will be prompted
to align the cartridge before you print for the
first time.
Note: An alignment print is required every time
you install a new cartridge. The software
will always prompt you to align the
cartridges. Make sure there is an unprinted
disc in the bin for this alignment.
6Installing Ink Cartridges
•With the cover open, press the Cartridge
Button on the top of the Publisher to
move the Ink Cartridge Carrier to the load
position.
•Remove each ink cartridge
from its packaging.
•Slowly remove the tape
covering the cartridge's
print head.
DO NOT TOUCH THE
COPPER AREA!
•Insert the ink cartridges into the carrier, c
opper end first and snap the cartridge cover
in place. Insert the color in the right holder,
monochrome black in the left cartridge
holder. The cartridge labels are color coded
to the cartridge covers.
•Close the Publisher's front cover.
5c Installing the Printer Driver (Mac)
Publishing a Disc
8
Connect the
Publisher to
your PC with
your beige USB
2.0 Cable.
Add the printer
via the Printer
Setup Utility.
1. Open the Printer Setup Utility located in the
Applications - Utilities folder.
2. Click Add. Select the Disc Publisher PRO
from the list of available printers. Click Add
again.

1Unpack Your Publisher
•Optical Disc Publisher
•Gray Plastic Input and Output Bins
•Power Cord
•One Three-Color (CMY) Ink Cartridge
•One Monochrome Black Ink Cartridge
•QuickStart Installer Disc (for use with both
CD-R and DVD-R models)
•USB 2.0 Interface Cable (Beige)
•Warranty Card
•This Operator's Manual, Quick Start Guide
and Other Printed Information
Save the carton and packing materials. They
will come in handy later if you ever need to
transport the Publisher and/or any of its parts
and accessories.
1. Place the Installer CD in your
CDRom Drive. The Installer
application will automatical-
ly launch in a few moments.
2. Click Standard Install to
begin the installation. You
may follow either the steps shown in this
Quick Start or the steps shown in the installer
to complete the installation.
Note: If the Installer does not start, open My
Computer on your desktop. Double-click the
icon of the appropriate CD drive containing
the Software Installer disc. Double-click
Installer.exe.
Installing the Software
PC
4Loading Media (Discs)
Mac
1. Insert the Bravo
Installation CD-ROM in
your system's CD-ROM
drive.
2. Double-click the
CD-ROM icon.
3. Double-click on the Disc Publisher
Installer.mpkg file icon. Follow the on-screen
instructions.
5a Installing the Printer Driver (Windows XP)
Connect the Publisher to your PC with your beige USB 2.0 Cable.
After a few moments, Windows will tell you it has found new hardware
and is looking for software to install it.
Select "Install the software automatically" and follow through the wizard to
complete the installation.
You will be prompted that the software has not passed Windows Logo Testing. You must click Continue
Anyway to finish the installation.
Applying Power
Important! Be sure you have removed the packing
tape and cardboard shipping insert before applying
power.
•Locate the power cord supplied with your
Publisher.
•Plug the adapter into a surge protected outlet,
and plug the power plug into the power port
on the rear panel of the Publisher.
•Turn on the power switch. Wait for the LED
lights to stop flashing (30 seconds).
2
3
NOTE: Your Publisher can print directly onto virtually any
brand of inkjet printable-surface CD/DVD media.
Due to the wide variety of printable-surface CD/DVD
media, you may find that certain brands of discs provide
higher print quality than others. For maximum print
quality, use CD/DVD media authorized by Primera.
Refer to the following steps when loading discs in
to the Publisher:
•Open the front cover of the Publisher
•The Publisher will automatically position the
cartridge carrier and Robotic Disc Transporter
to the center position allowing for easy access
to the bins.
•Load the Input Bin (the bin located on the
right-hand side of the Publisher) with up to
50 blank discs and place the bins on the
mounting pegs.
Open Cover
5b Installing the Printer Driver (Windows Vista)
Click the "Install Driver" button when prompted to
do so by the installation disc.
Files will begin to copy to your hard drive.
You will be prompted that Windows can't verify the
publisher of this driver software. Click Install the
driver software anyway.
Finally, connect the Publisher to your PC with your
beige USB 2.0 Cable.