Primus TC4400 User manual

TC4400 Modem
and Deco Wi-Fi 6
Pod Set Up Guide
Boost your Wi-Fi signal and coverage with
additional pods
For best results we recommend a Wi-Fi pod on every floor;
caIl us today to add additional pods.
Follow these easy steps to set up your additional Wi-Fi pod(s):
1. Place the additional Wi-Fi pod where you want it and plug it
into a power outlet.
2. When the light on the bottom of the Wi-Fi pod is solid green,
your additional pod is now connected to your Wi-Fi network.
This can take up to 5 minutes.
Connecting Wired Devices
Each Wi-Fi 6 pod is equipped with three ethernet ports
Your modem will take one port on your main Wi-Fi pod. The
second port or additional pods can be used to connect a
nearby device.
For example:
l Home Phone Analog Telephone Adapter (ATA)
l TV Set Top Box
l Gaming Console
l Computer
230808 Primus TC4400 Modem and Deco Wi-Fi 6 Pod Set Up Guide E
For general support for your Internet, or for additional
self-help resources visit support.primus.ca. or contact
our Technical Support team at 1-800-370-0015.

Setting Up Your High Speed Internet Service and Wi-Fi Network
Begin your Wi-Fi set up after your technician visit is complete or after your installation window has passed.
Download the TP-Link Deco app from the
Google Play or Apple App Store.
You will also find other features such as:
parental controls, anti-virus and how to
create a separate network for guests.
Customize Your Wi-Fi Name and Wi-Fi Password
That’s it, you should now be ready to
enjoy your Primus Wi-Fi!
Step 1 - Connect modem to cable outlet
Connect one end of the coaxial cable to the cable port on
your modem and other end to a nearby cable outlet.
Step 2 - Connect and power devices
Connect one end of the ethernet cable to LAN port 1 of your
modem and the other end to any port on your Wi-Fi pod.
Plug the power supply for your modem and Wi-Fi pod into
a power outlet.
The light on the bottom of the Wi-Fi pod should proceed
from yellow to blue, then remain steady on green. This can
take about 5 minutes.
Step 3 - Connect to Wi-Fi
Go to Wi-Fi settings on a device you would like to connect, and
search for available Wi-Fi networks.
Select the Wi-Fi Network (SSID) and enter the password that
matches those found on the bottom of your Wi-Fi pod.
If the light is red, reboot the modem and Wi-Fi pod by
unplugging the power adaptors.
Wait 30 seconds, then plug back in the modem. Wait another
30 seconds, and plug in the Wi-Fi pod.
Wi-Fi Network (SSID): Primus12345
Password: 1234567891012
(Do not use LAN Port 2 of the modem.)
Power Port
Power Port