
9User manual
4The accessories can also be attached at the end of the tube Aqto reach hard to reach places.
4The crevice nozzle Ayis ideal to vacuum hard to reach places.
4The furniture brush Aiis ideal to vacuum hard surfaces and fabrics.
CLEANING AND MAINTENANCE
Regularly clean the outside of the appliance with a dry cloth.
Empty the dust container A5after each use to ensure optimal suction performance.
Regularly clean the HEPA filter A7to ensure optimal suction performance. Follow the instructions in
chapter Cleaning the filter.
Cleaning the lter (see image E)
Make sure the appliance is switched off before cleaning and maintaining the appliance.
1. Press the dust container lid release button A6above a dustbin to empty the dust container A5.
2. Insert the crevice nozzle Ayinto the bottom of the filter housing A8.
Optionally, use your hands to remove the filter housing A8.
3. Rotate the crevice nozzle Aycounter clockwise to release the filter housing A8.
4. Remove the HEPA filter A7from the filter housing A8.
5. Tap the HEPA filter A7above a dustbin to remove dust and debris.
6. Remove all debris from the HEPA filter A7with the cleaning tool Au.
Regularly clean the HEPA filter A7and filter housing A8with water. Let the HEPA filter A7and filter
housing A8dry completely before reassembling the appliance.
7. Insert the HEPA filter A7into the filter housing A8.
8. Insert the crevice nozzle Ayinto the filter housing A8.
9. Insert the filter housing A8into the dust container A5.
Optionally, use your hands to insert the filter housing A8.
10. Rotate the crevice nozzle Ayclockwise to secure the filter housing A8.
11. Remove the crevice nozzle Ayfrom the filter housing A8.
12. Close the dust container A5 until you hear a click.
Cleaning the brush head and brush bar (see image F)
Make sure the appliance is switched off before cleaning and maintaining the appliance.
1. Press the release button on the brush head Atto remove the brush head At.
2. Slide the brush bar lock Aeoutwards to unlock the brush bar Ar.
3. Take the brush bar Arout of the brush head At.
4. Remove all hair and debris from the brush bar Arand brush head Atwith the cleaning tool Au.
Optionally, clean the brush bar Arwith water. Let the brush bar Ardry completely for 24 hours.
5. Insert the brush bar Arback into the brush head At.
6. Slide the brush bar lock Aeinwards to lock the brush bar Ar.
STORAGE
Store the appliance indoors, in a dry place and out of reach of children.
The wall mount/accessory holder A9can be clipped to the tube Aqto have all accessories at hand
when using the appliance.
Optionally, store the appliance using the wall mount /accessory holder A9:
1. Mount the wall mount/accessory holder A9 to a wall. Make sure to use the appropriate wall plugs and
screws for your wall.
4The wall mount/accessory holder A9is not intended to hold the appliance without support. Mount the
wall mount/accessory holder A9at a height where the brush head Atcan reach the ground.
2. Insert the crevice nozzle Ayand the furniture brush Aito the top and bottom of the wall mount/
accessory holder A9.