
Charging the battery (for devices
equipped with a battery)
1. Insert the charger plug of the
battery charger into the socket
on the underside of the cooler.
2. Plug the battery charger into an
electrical socket using the power
cord. The lower LED will light
up in red.
3. While the battery is being charged,
the upper LED ashes in green.
Once charging is completed,
the green LED stops ashing.
4. Disconnect the battery charger
from mains power and then from
the device.
5. When the battery is down to 15 %
of full capacity, a blue LED lights
up behind the air vents.
Cleaning
Clean the device with a soft,
damp cloth and then dry all
surfaces thoroughly.
Should you have any diculties
with the operation of the device,
please contact us at the following
email address:
moritz.ortwein@priovino.com
B C D
A
The Priovino Classic
is so easy to use
Set-up and operation
1. Plug the device into an electrical
socket using the power cord.
2. Switch on the device using the
On/O button ( A ) – blue digital
temperature display lights up.
3. Press the set button ( B ) –
the display begins to ash.
4. Use the plus ( C )/minus ( D )
buttons to enter the desired
temperature.
5. Press set button ( B ) once again
to conrm the temperature
setting – the display stops ashing.
6. The desired temperature setting
will now be seen in the display.
7. Place the wine bottle in the
bottle chamber.