© Pro-Ject Audio Systems · Pro-Ject Power Box RS2 Phono · Revision 2022.01.03
Dear music lover,
Thank you for purchasing a Pro-Ject Audio Systems Power Box RS2 Phono.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse
Important notice
Safety Instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
Never handle the device while your hands are wet or damp.
Avoid letting liquids enter the device. Never place any item containing liquid, such as a flower vase on
or near the device. Never spill any liquid on the device. Never place any naked flame sources, such as
lighted candles on or near the device. The product shall not be used in damp or wet locations, next to a
bathtub, sink, swimming pool or any other similar conditions.
Using the product
Power Box RS2 Phono is designed to power a wide range of DC-powered Pro-Ject turntables with 15V and
phono preamplifiers with 18V or 20V.
Make all connections whilst the Power Box RS2 Phono is
switched off or disconnected from the mains
.
Interconnection cables are included in the packaging. Original power supplies are no longer
required. Ensure that you use the correct cable for your device: The cables are marked on both ends.
In case of any doubts, consult user manuals of all connected products or ask your dealer.
Make sure that Input AC selector matches mains voltage in your country
Main power switch
The toggle switch on the front panel turns the unit on or off. The blue LED above the switch shows that the unit
is switched on.
Led indicators
The LEDsTurntable and Phono Stage on the front indicate that a device is connected.
All Pro-Ject Phono Boxes with 18V or 20V can be powered with the
.
