Pro-Line Boats PRO-2 User manual

WARNING! This is NOT a toy and is NOT suitable for children under 14 years old. This kit contains many small parts which are potential choking
hazards. Keep all components out of reach from small children.
HEALTH WARNING! This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
This kit is a high performance radio controlled model kit and can cause harm or personal injury. All liquids contained in this kit are not to be
swallowed. Never touch rotating parts as this can cause injury.
Thank you for purchasing Pro-Line’s first-ever complete kit: the PRO-2! For over 30 years, Pro-Line
has designed and manufactured the best RC accessories in the world. Pro-Line has taken the best
performance parts and combined them into one complete kit. Congratulations on making the right
decision and joining Team Pro-Line in making history!
Included Performance Parts:
• Pro-Line Performance Transmission
• PRO-2 LCG Performance Chassis
• PowerStroke Shocks
• ProTrac Suspension Kit
• Performance Steering Kit
• Flo-Tek SC Body
Enjoy your Ride!
From your friends at Pro-Line
Registration
Register your kit online at http://prolineracing.com/pro-2/register or call 1-800-899-RACE(7223).
Help and Information
Installation manuals and videos can be found on our website at http://prolineracing.com/pro-2/build
For any help you may need, you can call our tech support line at 1-800-866-RACE(7223).
TOOLS REQUIRED
EQUIPMENT REQUIRED
SCAN FOR HELP
SCAN TO REGISTER
RADIO RECEIVER ESC MOTOR SERVO & HORN BATTERY
+
-
CHARGER
+-
PAINTPINION GEAR
1.5mm HEX 2.0mm HEX 2.5mm HEX 5mm NUT DRIVER 5.5mm NUT DRIVER 7mm NUT DRIVER BODY REAMER SIDE-CUT PLIERS BODY SCISSORS
• Secure-Loc Body Mount System
• Blockade M3 Pre-Mounted Tires
• Short Course Closed Cell Inserts
• F-11 ProTrac Offset Black Wheels
• Military-grade components
This assembly manual contains instructions for building your new PRO-2. Please take your time building
the kit according to the instructions and becoming familiar with the steps.
Pro-Line is continually improving our products; consequently, actual parts included in the PRO-2 kit may
appear slightly different than the images that appear in the manual.

3
HARDWARE USED
(ACTUAL SIZE)
x 4
M4 x 12 FHCS
2
HARDWARE USED
(ACTUAL SIZE)
M3 x 14 BHCS
(Bag B)
x 2
HARDWARE USED
(ACTUAL SIZE)
M3 x 8 SHCS
x 2
1Front Bumper to Brace (Bag A)
Front Bumper to Bulkhead (Bag A)
Front Shock Tower to Bulkhead (ProTrac Bag & Bag B)

6
Screw into body post
half length of Set Screw.
HARDWARE USED
(ACTUAL SIZE)
x 2
Black O-Ring
x 2
M4 x 12 Set Screw
x 2
Secure-Loc Cap
5
HARDWARE USED
(ACTUAL SIZE)
M3 x 12 Low-Profile
(Bag B)
x 2
M3 x 14 BHCS
(Bag D)
x 2
4
HARDWARE USED
(ACTUAL SIZE)
x 2
x 2
M3 Locknuts
x 2
x 2
M3 x 30 SHCS
Ball Ends
M3 Washers
Shock Mounting Hardware (Bag C)
Body Mount Hardware (Bag D)
Front Body Mount to Shock Tower (Bag D & Bag B)
4th Hole From Top
Middle Hole
Outside Hole
*Use caution if using power tools. Heat may melt plastic.

9
HARDWARE USED
(ACTUAL SIZE)
x 2
M3 x 12 Low Profile
8
HARDWARE USED
(ACTUAL SIZE)
Small Inner Pivot Balls
x 2
Large Outer Pivot Balls
x 2
7
80mm (Actual Size)
50mm (Actual Size)
Driver’s Side Link:
“Driver’s Side” and “Passenger’s Side” refers to U.S. standards.
Passenger’s Side Link:
Keep this mark on the driver’s side.
x 2
Keep these marks on the driver’s side.
Use included turnbuckle wrench.
HARDWARE USED
(ACTUAL SIZE)
x 4
Long Rod Ends
Front Camber Link Rod Ends (Bag E & ProTrac Bag)
Front Camber Links to Shock Tower (Bag E)
Front Camber Link Pivot Balls (Bag E)
Middle Hole