pro master Specialist Series User manual

@
[proju.aster
Bi-Color 18
LED Ringlight
SP EC I ALI ST ES
Congratulations on your purchase of this ProMaster Specialist LEDR600B Ringlighl
It is a professional Bi-Color light that is excellent for portraiture and marry types of
photography and videography in which soft, direct light is desired. The LEDR6008
has many advanced, technical features
Please read through this instruction manual to familiarize yourself with the features of
this light so you can get the best results

Parts Identification
Blue Indicator Light
@Orange Indicator Light
Control Knob / Button
Vents
Power Button
G Optional
Battery Locations
@ Camera Bracket
Cnnection Ports
9 Ac Cable Input Socket
AC Selector
Switch
Tilt Control Knob
Light Stand Connection Knob
@ Light Stand Mount
8. Camera Bracket Connection Ports
1. Vents
9. AC Cable Input Socket
Urange indicator Light
2
10. Battery /AC Selector Switch
3. Blue indicator Gcht
11. Tilt Control Knob
Button
12. Light Stand Connection Knob
PowBr Button
13. Light Stand Mount
6. Optional Battery Locations
7.LED Display
(2)

Using the Light
Mounting the Light: The LEDR600B is fitted with an industry- -standard 5/8"' light stand
connector. This is identified as the Light Stand Mount (13) in the parts diagram. Loosen the
Light Stand Connection Knob (12) before sliding the Light Stand Mount (13) onto a light
stand, grip arm, flex arm, or other type of grip item fitted with a 5/8' male spigot or stud
9
Tighten the Light Stand Connection Knob (12) for a secure fit
Attaching a Camera to the Light: Included with this kit is a camera connection bracket and
two wing nuts. The bracket is shaped like an 'L'. Align the slot in the camera connection
bracket with the two Camera Bracket Connection Ports(8) on the back of the ringlight. Insert
both wing nuts through the slot and into the Camera Bracket Connection Ports (8). The
portion of the camera connection bracket with a rubber pad and attachment screw should be
oriented at the top of the bracket when you attach it to the light. The bracket can be mounted
in one of two directions, with the top facing into the center of the ringlight or with its top
facing away from the back of the ringlight. Use whichever will give your camera the most
ideal placement within the ringlight's center. Loosen the wing nuts slightly and slide the
bracket up or down for the most ideal placement of your camera
Powering Up and Down: The LEDR600B can be powered by AC current from a common
wall outlet or by two NP- -F type batteries (not included). Locate the AC cable included with
the kit. Check to be sure the Battery / AC Selector Switch (10) of the ringlight is set to the
AC position with its right side pressed in. Attach the 2-pin, figure-8 connector of the AC
cable to the AC Input Socket (9) on the Ringlight. Next connect the 2 -prong household
connector on the AC cable to a standard household socket. Now press the Power Button
(5) and hold it down for approximately 1 second until the light illuminates. Release the
Power Button (5) now. To power down the unit hold the Power Button (5) for approximately
1 second until the illumination turns off. Switch the Battery / AC Selector Switch (10) to its
center position and then either disconnect both batteries or disconnect the AC power cable
from the wall outlet.
Note: Always be sure the light is turned OFF before disconnecting the AC cable. Disconnect
the AC cable from the household socket BEFORE disconnecting it from the AC Input Socket
(9) of the ringlight.
A note about power via Batteries: The LEDR600B includes an AC power cord. Batteries are
optional and can be used instead of AC power for portability. If you choose to purchase
batteries be advised you will also need to use an external charger. The LEDR600B cannot
charge batteries in the unit. It can only draw power from them. Be sure the Battery / AC
Selector Switch (10) is set to the Battery position with its left side pressed in when using
batteries. Then use the Power Button (5) to illuminate the light as described above in
Powering Up
Batteries must be used 2 at a time occupying both of the Optional Battery Locations (6)
Acceptable battery types include: NP-F550, NP-F570, NP-F750, NP-F770, NP-F970
(3)

Using the Light
Adjusting the Brightness: When the Blue Indicator Light (3), with the letter 'D' to the left of
it, is illuminated (D stands for Dimmer) the LEDR600B is in Brightness Control Mode Rotate
the Control Knob / Button (4) clockwise to increase brightness or counterclockwise to
decrease brightness. Notice the LED Display (7) will show a number between 1 and 99 as
you change the brightness to indicate your setting
1 is the lowest brightness setting while 99
is the highest. If the light is in another mode you can return it to Brightness Control Mode by
pressing the Control Knob / Button (4) quickly 2- -times in succession
Adjusting the Color Temperature: When the Orange Indicator Light (2), with the letter 'C'
9
to the left of it, is illuminated (C stands for Color Temperature) the LEDR600B is in Color
Temperature Control Mode. Rotate the Control Knob / Button (4) clockwise to increase the
coolness of the light and counterclockwise to increase the warmth of the light. Notice the
LED Display (7) will show a number between 32 and 56. 32 stands for 3200 Kelvin color
temperature. 56 stands for 5600 Kelvin color temperature. And numbers in between
indicated color temperatures in a similar fashion. If the light is in another mode you can
return it to Color Temperature Control Mode by pressing the Control Knob / Button (4)
quickly 2- -times in succession
Selecting a Channel for use with Remote: While the light is powered ON, press and hold
the Control Knob / Button (4) for approximately 3 seconds to enter Channel Select Mode
Both the Orange Indicator Light (2) and the Blue Indicator Light (3) will be off to indicate you
are in Channel Select Mode. Rotate the Control Knob / Button (4) clockwise to increase the
channel number up to 99 or counterclockwise to decrease the channel number to 1. You
have 99 channels to choose from. To exit Channel Select Mode press the Control Knob /
Button (4) once quickly
Note: Refer to the separate instruction manual for the included 1706 wireless remote to learn
its operation
Checking Battery Capacity: With the LEDR600B's Battery / AC Selector Switch (10) set
The
to Battery mode with its left side pressed in, press the Power Button (5) once quickly
light will not illuminate but the LED Display (7) will flash a number to indicate the amount
of capacity in the two batteries between 1 and 99 with 1 being nearly depleted and 99
being fully charged. You can check the battery capacity when the light is illuminated or
when it is not
to
Adjusting the Light's placement: The Tilt Control Knob (11) can be loosened slightly
allow the ringlight to be tilted up or down. The Light Stand Connection Knob (12) can be
loosened slightly to allow the light to be rotated left or right. All other adjustments for
placement of the ringlight should be done with the particular stand or grip you have the
ringlight mounted to
(4)

Specifications
6334 SPECIALIST
Model
Power Consumption
60W
170 lux at 10' / 3 m
1360 lux at 3' / 1 m 1
Brightness
Luminous Flux
6,000 LM
624 PCS
LED Quantity
3200K - 5600K +/- 200K
Color Temperature
CRI 95+
Color Accuracy
10% -100%
Dimmer
50 ,000 hours
Lamp Life
99 channels 2.4G wireless remote control
Remote Control
Effective Wireless Distance Range
>30 m / 98
NP-F550, NP-F570, NP-F750, NP-F770, NP-F970
Lithium Battery Type
AC 100-240V 50/60Hz
wer Input
Outer 18' '/ 45.7 mm I Inner 12 %." / 31.8 cm
Dimensions
3 lbs 5 oz/1.5 kg
Weight
(5)