PRO SIGNAL PSG03180 User manual

Volume Control 100v 50w - White
PSG03180
10 step speaker volume control which is ideal for low/ moderate sound installations. The
unit is suitable for ush mounting or surface mounting using the back box supplied.
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
When using electrical appliances basic safety precautions should always be followed.
• To prevent re or shock hazard, do not expose this product to rain or moisture.
• To avoid electrical shock, turn off and disconnect the 100V speaker input at the
source device before opening this product.
OVERVIEW

INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL & ELECTRONIC
EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic Equipment (WEEE).
Any WEEE marked products must not be mixed with general household waste, but kept separate for the treatment,
recovery and recycling of the materials used. Contact your local authority for details of recycling schemes in your area.
Made in Taiwan
PR2 9PP
Man Rev 1.0
INSTALLATION
SPECIFICATIONS
• 10 step attenuation (0 is Off).
• Screw type termination for speedy installation.
• 24V Relay.
• 35Hz - 20kHz Frequency response.
• Can be ushed mounted into a 45mm deep 1G UK back box.
• White plastic front panel and control.
CLEANING & MAINTENANCE
• Clean the outside panel with a soft cloth lightly moistened with a mild detergent.
• Never use any abrasive or solvents.