
• Before installation, please make sure all devices you wish to connect have been
powered off.
• Connect one transceiver to the BNC output connector of the source equipment and
one to the input BNC connector on the destination device.
• Connect the two transceivers using CAT5e (or better for longer distance/higher
resolution) UTP cable.
NOTE: this is not an Ethernet device - do not connect via an Ethernet.
• Power on both source and destination devices.
SPECIFICATIONS
Video Format HD-TVI, AHD, HDCVI, CVBS
Max. Video Resolution 8MP (4K)
Transmission Distance
using CAT5 UTP
HD-TVI 100M at 4K
AHD 200M at 4K
HDCVI 200M at 4K
CVBS 300M at NTSC/ PAL
CCTV 400m colour
CCTV 600m mono
Bandwidth 50Hz to 60MHz (-3dB)
Video Input/ Output 1 x BNC Male(1V p-p, 75Ω)
Link Interface 1 x RJ45 (UTP)
Operation 0 to 55oC
Storage -20 to 85oC
Humidity Up to 95%
Dimensions 69 x 25 x 20.7mm
Weight 30g