PROAIM P-HDRT-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Headrest Car Mount for Cameras and
Camcorders (P-HDRT-01)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Proaim Headrest Car Mount 1 x Allen Key 3/16mm

2
Headrest Car Mount Setup
 Loosen the four bolts and slide the clamp on
the headrest car mount accordingly.
 Insert the vehicle’s backseat rod into the
clamp and aach the backseat back in place.
 Aer inserng the headrest car mount,
properly secure the bolts with the help of a
3/16mm Allen key.
 While loosening the bolts, the clamp has to be
loosened a bit so that the backseat rod of the
vehicle can be inserted, as shown
in the image.
NOTE: Clamp the headrest behind the Car Seats
with given slots, slide horizontally, and put it in
the ideal posion. And these slots are secured
with bolts to hold heavier setups.
 Loosen the clamps aached at the boom of
the headrest car mount by loosening the bolts
slightly with the help of a 3/16mm Allen key.
NOTE: Headrest Car Mount is designed to
mount lm equipment & accessories inside the
cars.
 The headrest car mount is properly xed with
the rear seat of the vehicle, as shown in the
image.
NOTE: It is a complete & universal backseat car
mounng soluon that works with almost every
car & vehicle.

3
YOUR PROAIM HEADREST CAR MOUNT FOR CAMERAS AND CAMCORDERS
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
 Aach LCD (Not Included) to arm through the
threads and then secure it properly.
 It is enrely modular & adjustable. You just
need to set your LCD behind the front seat in
any desired posion and focus only on your
creave cinemac shots.
 Insert the LCD arm (Not included) into the
headrest car mount by matching several
threads to secure the arm by rotang it
properly.
NOTE: Headrest car mount has mulple
1/4"-20 and 3/8"-16 threads & holes to rig
various equipment like Isolator arms, Monitors,
Video Recorders, Wireless, Led Lights, etc.

4
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.