PROAIM BP-302-01 User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Mitchell Base to Bowl Camera Adapter
150mm (BP-302-01)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Proaim Mitchell Base to Bowl
Camera Adapter 150mm
Allen Key 3/16”
2 x Bolts
Washer

2
Bowl Camera Adapter 150mm Setup
• Mount the 150mm Bowl Adapter on the Slider
(Not Included).
Note: The Mitchell Base to 150mm Bowl Adapter
provides mulple mounng possibilies owing to
its innovave design.
• Loosen and remove the uid head knob as
shown in the image.
• Mount the uid head on the 150mm Bowl
through the screw.
• Insert the washer on the uid head screw from
the boom of the slider (Not Included).
• Now, re-aach the uid head knob and ghten
it to secure the uid head.
• Remove the uid head quick-release plate
(Not included) by opening the top plate of the
uid head and pressing it’s Locking knob.
• Aach the quick-release plate to the boom of
the camera (Not included) and ghten it using
a screwdriver.

3
YOUR PROAIM MITCHELL BASE TO BOWL CAMERA ADAPTER 150MM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
• Now, slide the camera onto the uid head
(Not Included).
• Secure the Camera (Not Included) using the
locking knob of the uid head (Not Included).
• The Setup is ready to use.