PROAIM CINEMA Series User manual

Instruction Manual
Fly 22” Camera Crane With LW-100
Stand (P-FLY-22-S)

2
Subject Page
Foreword 3
Introducon 4-5
Assembling 5-11
Warranty 12
At Proaim, our goal is to ensure 100% Customer Sasfacon in all that we do.
We back our sales with a 1 year warranty from the date of purchase and work hard
to resolve any problems in the unlikely event one should arise.
With our commitment to connuous improvement and your Feedback, building on
our reputaon of providing aordable, quality products is
PRIORITY #1.
Table of Contents

3
Dear Client,
On behalf of all the people that work so hard to provide you with the most
up-to-date, exible and cost-ecient producon gear, we would like to welcome
you into the Proaim family.
By purchasing your Proaim Fly 22' Camera Crane with LW-100 Stand, you have just
joined a host of designers, engineers, machinists, assembly, customer service and
oce sta that take great pride in all that they do. Our mantra of connuous im-
provement has been the guiding principle of how we conduct our business since
day one.
Once you have the opportunity to experience your new Proaim Fly 22' Camera
Crane with LW-100 Stand, we hope you will agree that we cra quality products at
a compeve price. Products designed to meet and exceed the standards of to-
day’s real producon world.
Standards set by our valued clients and standards we strive to maintain.
With Best Wishes,
Proaim Team
Welcome To Proaim!

4
Introducon
Heavy-duty yet Lightweight Crane meets various shoong demands.It oers Great
Performance, enhanced stability, and fast setup.Adapts Pan Tilt Heads & Gimbals
like DJI Ronin® & Freey MōVI®.High-grade aluminum construcon , takes
20kg/44lb payload. The Robust 100mm Tripod Stand steadily supports the Crane
setup.
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received
everything that is listed below.
LW-100 Jib stand
2 X Red Cables 2X blue Cables
Spreader
Cable Guide support rods
Weight closer Weight safety ends Connecvity Plate
Weight rod

5
 Take out the Spreader from the Accessory Bag. Spread the spreader on oor and open the
legs of spreader with the help of provided knob.
Assembling
 Open the legs of 100mm jib stand then aach it to spreader, lock it in place with the
rubber grips.
Packing

6
Assembling Jib Secons
 Now mount the central fork onto the tripod , then aach boom clamp to secure it well.
 Slide the (1 A Secon) into the central fork (secon 2 B) and ghten with the help of knob.
Slide
 Insert the connecng bars (secon 1 A) aached it with both the ends (weight bar&
secon 2B) the both the ends using the provided knob.
Connecon bar
knob

7
Assembling Cable Guide And Support Rod
 Using the same approach insert 3rd, 4th and remaining secons to the joints and secure
via knobs as shown below.
 Aach short cable guide rod on 3rd secon properly. Insert the knob onto the cable guide
rod and ghten the knob properly.
 Loosen the bolts on cable guide rod in order to aach cable guide support rod to it.
Reghten the bolt.

8
 Using the same steps to and aach long cable guide rod on 2nd secon as shown below.
 Insert the weight rod on (1 secon) and ghten the bolt with the help of allen key as shown
in the picture.
 Then insert the safety ends at both
sides onto the weight rod.

9
Adjusng The Stability Cables
Cable code (red)
 Now aach the both red cable hook onto the provided bolts properly as shown below.
Note : Both the red cables are following same steps.
 Aach (Red) cable to the (2 B secon) and (secon 3 C) & align itproperly with the help of
cable guide clamp and aached with (5 E secon).
Cable code (blue)
 Aach the cables and insert the hook onto the weight rod.

10
 Align it to the cable guide side rod and aach it to the end (secon 5th).
NOTE: You can adjust the cable with the
help of wire tensioner.
 Aach your head plate properly and ghten the knob.