Profile PCF-300 User manual

3 Remotely controlled electric sockets EN - 1
PCF-300/PCF-310
We thank you for the purchase of this Profile product.
Note: It is important that you read this manual carefully
before using the product and be sure to save this manual
for possible use later.
Modern electrical installations are increasingly based on
the use of wireless control systems based upon RF
technology (Radio Frequency) and make efficient
management of all kinds of systems and devices possible
in the home. These modern systems provide for
improved protection of privacy and enhanced user-
friendliness. They perfectly combine safety and power
saving.
Setting up the remote control channel:
Setting up the main channel
1. Remove the cover from the base of the remote
control and fit the battery.
2. Adjust the channel selector as required to another
position
3. Replace the base cover
Setting up the main channel and receiver channel
Setting up the channel for receivers (electric sockets)
1. Undo the top cover on the rear of the electric sockets
using a screwdriver.
2. You will see 10 dip switches:
the first 5 are for the main channel: from 1 to 5
the last 5 are for the receiver channel: from A to E
3. Set the first 5 switches in exactly the same way with
the switches set to remote control e.g. 1 pointing up
and 2, 3, 4, 5 pointing down
4. Set the next 5 switches according to the required
ON/OFF switch on switch control A
The red LED on the receiver illuminates when you
send an ON signal to the receivers. The red LED is
also a control instrument to see whether you have
properly fitted the receivers in the electric socket.
Conversely, when you send an OFF signal to the
receivers, the red LED will go out, and the connected
device will switch off.
Practical example
Remote control
1 2 3 4 5
Socket 1 (button on/off A)
1 2 3 4 5 A B C D E
Main channel Receiver channel
Socket 2 (button on/off B)
1 2 3 4 5 A B C D E
Main channel Receiver channel
Socket 3 (button on/off C)
1 2 3 4 5 A B C D E
Main channel Receiver channel
Socket 5 (extra socket: PCF-310)
(=button on/off D)
1 2 3 4 5 A B C D E
Main channel Receiver channel

3 Remotely controlled electric sockets EN - 2
PCF-300/PCF-310
Maintenance
Only use a dry, soft cloth for cleaning.
Never immerse the lamp in water.
Maintenance and repairs may only be carried out by
technicians who are familiar with any applicable
regulations.
Safety instructions
The importer accepts no responsibility for damage claims
with respect to objects or persons that result from
incorrect use or non-compliance with the safety
instructions. Any damage claims in such cases will be
declared null and void.
Guarantee conditions
The guarantee period for the PCF-300/PCF310 amounts
to 2 years and commences on the date of purchase.
During the guarantee period ELTRA NV will repair any
defects attributable to material or production faults.
ELTRA NV may choose to either repair or replace a
defective appliance.
ELTRA NV is not obliged to repair or replace appliances
if they have become defective as a result of damage,
inappropriate use, or modifications or adaptations made
after the purchase date.
Take any defective appliance together with the original
receipt back to the shop where the appliance was sold.
Always add a note with a description of the problem.
Damage
ELTRA NV can under no circumstances whatsoever be
held responsible for damage of whatever nature if the
appliance was not correctly installed according to the
specified installation instructions, nor for damage as a
result of unforeseen circumstances such as natural
disasters, lightening strike, etc. All such resulting costs
are consequently at the expense of the buyer and are not
covered by the guarantee conditions.
www.profile.eu
Eltra nv, Pachtgoedstraat 2, 9140 Temse, BELGIUM
Eltra DIYeuronet, Frontstraat 14, 5405 AM Uden,
THE NETHERLANDS