Profoto OCF Zoom Reflector User guide

OCF Zoom Reflector
Mounting instruction

About
OCF Zoom Reflector
The OCF Zoom Reflector is designed with the on-location
photographer in mind. Use it with your Profoto O-Cam-
era Flash to maximize your light while keeping the size
and weight of your bags to a minimum.
By flipping through these pages you’ll quickly learn how
to get the most out of your new OCF Zoom Reflector.

Use restrictions
and compatibility
Note!
The OCF Zoom Reflector is only recommended for
Profoto O-Camera Flashes and monolights with flat front.
Max flash power: 1000Ws. Max modeling light: 300W.
OCF Magnum Reflector is recommended for:
Profoto B1
Profoto D1
Profoto B1X
Profoto D2
Profoto B2

Get started with
your new reflector

1Open the clasp on the rubber collar and gently
push the reflector onto your light.

2Before closing the clasp, adjust the light spread by
sliding the reflector back and forth on the head.

3Pull back the reflector for a wide light spread.

4Push the reflector forward to gradually narrow
the light spread and increase the light output.

5Lock the reflector to your selected position by
closing the clasp on the rubber collar.

How to pack
compact
The OCF Zoom Reflector is compact enough for you
to bring it without taking up extra space in your bag.
This is our best tip for compact packing.

1Mount the reflector onto the light and pull it back
as much as possible before putting the transport
cap on your light.
B1, B1X, D1 and D2

2Turn the stand mount to a horizontal position.

3Pack into your bag!

1Mount the reflector onto the B2 head and pull
it back as much as possible before putting the
transport cap onto the head. Turn the stand
mount to a horizontal position.
B2

2Wind the cable around the reflector.
NOTE! Wait until the reflector has cooled o.
3Pack into your bag!

For more information and inspiration:
profoto.com