Flycam Flowline Master User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Flowline Master with Pro Vest (FLCM-FLN-MSTR-03)
Assembly Manua l
Camera Hook
Support Bar
Side Support
Adjustment Release
Lever
Balance Adjustment Knob Bag Packing
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Accessory Bag

2
Join secon-1 of support bar to secon-2
with simple push-t technique.
Remove the side knobs and join secon-2
with secon-3 and again ghten the side
knobs.
Flowline Master Setup
Wear Support Jacket and ghten the
buckles provided at chest and waist. Then
adjust unl you nd it comfortable.
Secon-1
Secon-2
Side knob of
Secon-2
Secon-3
Aach one end of Safety Belt with Support
Jacket, Make a knot with rest of the belt as
shown in the image. You can aach this belt
at many areas according to your
requirement.
Loosen the knob of hook and aach the
camera with it. Tighten the knob to ensure
slip free connecon.
For Safety Belt
Aach other end with your camera, for
more safety & protecon.

3
YOUR FLYCAM FLOWLINE MASTER WITH PRO VEST
ALL DRESSED UP AND READY TO GO
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of
me, we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor
does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to
inspecon and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
Through the Tension Adjustment Knob, you
can adjust the tension by rotang the knob
an-clockwise according to the weight of
your setup.
CAUTION: Do Not release the Lever without
removing the setup. It may result in serious
damage to the camera.