ProGlove MARK 2 BLE HD Quick setup guide

1
BLE
MARK 2 BLE HID
INTEGRATION GUIDE
Technical Document

- wearables for industry
BLE
MARK 2 BLE HID
TABLE OF CONTENTS
INITIAL SETUP
Pairing via BLE HID ............................4
Default Settings..................................4
Conguration......................................4
System Requirements........................4
APPLE iOS
Pair......................................................6
Unpair..................................................7
GOOGLE ANDROID
Pair......................................................8
Unpair..................................................9
MICROSOFT WINDOWS
Pair....................................................10
Unpair................................................11
DAILY USAGE
Daily Usage via BLE HID .................12
Support

3
NEED HELP?
 [email protected] (EU)
 [email protected] (US)
0800 776 22 55 (inside germany)
[phone] (outside germany)
EXPLANATION OF SYMBOLS
NOTE
Further Notes start with the word NOTE. They contain
further information to the specic chapter.
TIP
Further Tips start with the word TIP. They provide useful
information to simplify a specic process.
RESULT
The RESULT will show the outcome of the prior action.

- wearables for industry
BLE
MARK 2 BLE HID
INITIAL SETUP
PAIRING VIA BLE HID
MARK 2 is able to connect to the end device via Blue-
tooth Low Energy Human Interface Device (BLE HID).
DEFAULT SETTINGS:
Barcode Sux: Enter (CR)
USB: HID Output Mode, German (Germany)
RS232 Baudrate: 115,200
CONFIGURATION:
To congure the Barcode Settings, Data Formatting
and Device Settings visit cong.proglove.de
(Further information can be found in the User Manual -
MARK 2.)
NOTE: DEACTIVATE THE BATTERY SAVING MODE
ON YOUR END DEVICE
The end device will stay unlocked so the connection
between MARK 2 and end device can not be interrup-
ted.
SYSTEM REQUIREMENTS:
End device supports minimum Bluetooth 4.0
Standard
Make sure no interferences or physical obstac-
les (e.g. metal shelves) are disrupting the con-
nection between MARK 2 and end device.
The range between MARK 2 and the terminal is
less than 10 metres
SECURITY AND CERTIFICATION:
EMC according to EN301489-1/-3
ETSI according to EN300220-2
Security according to IEC60950-1

5
TIP 1: LABEL YOUR DEVICES
Attach labels to each pair of devices to make sure you
can distinguish between them and not get confused.
TIP 2: ATTACH PAIRING BARCODE LABEL TO END DEVICE
Make sure the Pairing Barcode is easily accessible for the user.
IDENTIFYING MARK 2 MARK 2 PAIRING MODE
01 02
To identify MARK 2 on your end device use the identi-
cation number. You can nd it on the attached label
 Read the serial number of MARK 2.
For example: MARK 2 - 00000
To make MARK 2 appear in the available Bluetooth
devices list, you have to initiate the Pairing mode rst.
Scan the pairing barcode with MARK 2.
PAIR MARK 2 WITH THE END DEVICE
03
MARK 2 BLE HID supports end devices running Micro-
soft Windows 10, Google Android 4.4 or higher and
Apple iOS 11 or higher.

6
- wearables for industry
BLE
APPLE IOS 11 OR HIGHER
PAIR
Go to ‘Settings - Bluetooth’ and
turn on Bluetooth.
Choose ‘MARK 2 - 00000’. Accept the request and pair the
devices.
‘MARK 2 - 00000’ is ready and
listed under ‘MY DEVICES’.
01 02 03
Settings
MARK 2 - 00000
MARK 2 - 00000

7
Go to ‘Settings - Bluetooth’ and
tap on the Symbol.
BLE
APPLE IOS 11 OR HIGHER
UNPAIR
‘MARK 2 - 00000’ is no longer
shown under ‘MY DEVICES’.
Tap on ‘Forget this Device’. Conrm ‘Forget Device’.
01 02 03
NOTE: Unpair MARK 2 only if you want to establish a new
connection with another end device.
(For daily use, keep the connection in place, see p.12)
MARK 2 - 00000

8
- wearables for industry
GOOGLE ANDROID 4.4 OR HIGHER
PAIR
From the top of your screen swi-
pe down to access the settings
and tap on the Bluetooth symbol.
Activate Bluetooth. Choose ‘MARK 2 - 00000’. ‘MARK 2 - 00000’ is ready and
added to the list of connected
devices.
01 02 03
BLE
MARK 2 - 00000 - 00000

9
GOOGLE ANDROID 4.4 OR HIGHER
UNPAIR
‘MARK 2 - 00000’ is no longer
shown under ‘Your devices’.
From the top of your screen
swipe down to access the
settings and tap or hold on the
Bluetooth symbol.
Open device settings and unpair
or forget the device.
NOTE: Unpair MARK 2 only if you want to establish a new
connection with another end device.
(For daily use, keep the connection in place, see p.12)
01 02
BLE
- 00000
- 00000

10
- wearables for industry
MICROSOFT WINDOWS 10
PAIR
Go to Settings ‘Bluetooth & other
devices’.
Click on ‘Add Bluetooth or
other device’.
Choose ‘MARK 2 - 00000’. Click ‘Done’.
01 02 03 04
BLE
MARK 2 - 00000
MARK 2 - 00000

11
MARK 2 - 00000
MICROSOFT WINDOWS 10
UNPAIR
‘MARK 2 - 00000’ is ready and
connected.
‘MARK 2 - 00000’ is no longer
connected.
Choose ‘MARK 2 - 00000’. Click ‘Remove device’.
01 02
BLE
MARK 2 - 00000MARK 2 - 00000
NOTE: Unpair MARK 2 only if you want to establish a new
connection with another end device.
(For daily use, keep the connection in place, see p.12)

12
BLE
TÄGLICHER GEBRAUCH
CHECK INSERT
01 02
Insert MARK 2 into the clip and slide it in position until you hear
a click.
Make sure to pair the correct devices.
PAIR
04
TURN ON
03
Press and hold the trigger, scan Pairing Barcode label on end
device. Wait until MARK 2 blinks blue twice to indicate
successful pairing.
Press and hold the trigger for 2 seconds to turn on MARK 2.
MARK 2 BLE HID
DAILY USAGE

REMOVE
SCAN
CHARGE
07
06
08
In case there is no Pairing Barcode label on end device:
scan this Pairing Barcode.
Press down the small bridge on the front of the clip and pull
MARK 2 upwards. Then slide it out of the clip.
Press and hold the trigger. Position the crosshair on the
barcode and scan.
Insert MARK 2 into the Charging Station. While charging the
LEDs will pulsate red. Once fully charged the LEDs will pulsate
green.
PAIRING BARCODE
05
30 - 150 cm
10 - 80 cm
mid range
standard range

Workaround GmbH
Rupert-Mayer-Str. 44
81379 München
Germany
Congure device at:
cong.proglove.de
Support:
support.proglove.com
[email protected] (EU)
[email protected] (US)
Bluetooth Low Energy